I'm using the Thermaltake Tiger 1 also and it works well. The temps are only slightly less than the original but there were just to many issues with the original fans when these boards came out so I switched.
I would assume that you are pressing F6 when prompted early in the install so that it gives you an opportunity to instal the scsi drivers. If you are and it isn't finding the correct drivers then try to get them from Soyo's website and put them on a floppy for install.
I am also considering...
Don't forget the SH6 w/i815e chipset. I think that this was the only board ever made with the i815e for a slot 1 processor but I'm not sure. I had one running a 650 p3 about 1 1/2 years ago - good board but you have to be careful what memory you use with it as there are some issues with the...
Well, I thought that I posted this yesterday but I could not find it in the forums so I will just try it again. I did not know if anyone else has posted this but the P4G8X and the deluxe models are listed on eBay with an eta of 11/30 at MyInfinity.com. I don't know anything about this reseller...
The temps are reading about 5 degrees Celsius higher than the 1700+ so I figure that is about normal at around 45C at idle and around 51-52 at full load. I think that the power supply might also be the problem as the +5v drops from "normal" of 4.910 to about 4.8 under load. I have ordered a...
I've seen many good reviews of the Vantec Aeroflow which is quiet compared to the nasty Delta fans and costs about $25 from KD Computers or about $33 at Newegg. I'm sure others have it for less than that. You might give it a look.
I just got a new XP 2100+ processor for my system which my dad is actually getting (I'm setting up a 2.66 p4 for myself). I have a Gigabyte 7VRX which has been running an XP 1700+ completely stable for a year - I'm not really into overclocking - the highest that I have tested it was at 150fsb...
The Asus P4G8X is listed on pricewatch now for $179 and the deluxe version for $199 with an ETA of 11/30/02 for MyInfinity.com. Don't know if this is old news or not but I just saw it listed and did not see anything in this post about it.
I know that there have been a lot of "cold boot" issues with Abit boards of late. Have you experienced any of these problems or have you shut off the computer long enough for it to get cold yet? I was also thinking about one of these boards or possibly the P4PE. Have you tried to run it with...
I saw that on sale at Fry's also - it is a good deal. If I remember right the A7V133 uses the KT133A. If this is the case then it will be faster then the ECS mobo. If it uses only the KT133 then it would probably be about the same. My suggestion would be to buy that setup and some PNY PC2100...
I was using it in my old SDRAM setup with a KT133A mobo. I also bought some Kingmax PC-150 tiny BGA ram thinking that it would overclock further and it would not. I could actually run the PNY at the most aggressive timings at 150mhz. I was quite impressed. From memory (no pun intended) I...
For those who don't want to wait to download Sisoft 2003 for the numbers:
Intel 850E w/PC1066 CL2 = Ram Int 3340, Ram Float 3338
E 7205 w/PC2100 CL2 = Ram Int 3252, Ram Float 3251
Not quite as fast but games would probably show less than 1 or 2 FPS difference at the most.
Oh and for those...
I don't know if this is old news or not but I just downloaded the standard version of Sisoft 2003 and one of the comparison chipsets in the memory bench is the Intel E 7205 or Granite Bay!! The test shows PC2100 at CL2 and the numbers are virtually the same as PC1066. I can't wait for these...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.