Increasing Asynch Latency and Read Preamble let me get memory run memory up to a 388Mhz FSB (with cpu multiplier set to 8x); however, when I raise the cpu multiplier to 9x, the system will not boot. I've tested the processor at 388Mhz FSB independatnly (with a lower memory divider) and it...
When attempting to overclock my 3000+ on my Infinity RS482, i've run into issues with memory dividers. My ram runs fine at the stock 1:1 ration at ddr 400, but I can't boot into Windows over ddr 367 when using a memory divider. I've tested my processor up to 2.6 GHz, and my FSB to over...
I had a 17" trinitron monitor that had 2 lines in the middle of the screen. However, these lines were only visible when the screen was very light (like on windows startup or web browsing). Most of the time I forgot they were even there.
Used these for a couple months, then they broke (wiring went bad where cord connects to the headset). Looking back, these are not adjustable at all, and began to hurt my head after a couple of hours of usage. I'd pass on these and find a traditional over-the-head style headset.
Could someone inform me of these difficulties?
I am getting ready to buy an external drive and am debating between buying an internal drive and an enclosure or just purchasing an external drive. I was about to go with the 300gb seagate external drive (Link) until i heard about these...
DVDDecrypter + AutoGK here. You can download a Newbie Guide here --> http://homepage.mac.com/echowatch/autogk/
The guide is very helpful, sets you up and tells you everything you need to know to start ripping DVDs like a pro!
Be careful before you go out and buy a new motherboard. Companies like Dell are notorious for using non-standard sized motherboards and mounts inside their computers. I would make sure you know exactly what kind of board is in your case right now, or you're gonna end up with a lot of...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.