Yep, this was pulled from Hard|OCP
<< Just got word from Randall Siggers that they have outfitted their AMD Dually board from Tyan with two new AthlonXP 1800+ CPUs and all is working just fine. Take it for what it is worth. I know Randall is a man of his word >>
Second post in the Nov. 1...
slowly increase the FSB... pretty simple..
when the machine stops working, or freezes when you stress it try upping the Vcore .1v and so on...
becarefull with the voltage tho, only go .2v up or so...
Get good cooling, it'll help you achieve higher scores..
Craig
Ok, I wasn't gonna continue it, but since I got two responses why not? Eh?
It was a Question if that was his Inferance, the punctuation is there...
My point still stands, why would you throw out BX boards because people don't wanna get rid of'em?
and at the same time you agree that it is faster...
Hmmm I'm doing fine with my P2b.. and so are the other 5 or so I've set up with now more than 265MB of ram...
Basically all the above suggestions are good ones...
Lemme get the situation clear tho...
You are trying to run a P2b with a 64MB and a newer 128Mb stick of Kingston RAM right?!?
if so...
<< the number of celeron systems that have been overclocked to like 366@500 type of thing still lives and alot ppl aren't trying to let go of the BX chipset. Therefore these ppl should be banished from the stats VIA is pretty much owning it up now, reguardless of the southbridge fisaco. >>...
<< My bad about the DIMMs...I've just always assumed that they had to be together, although I do know that you have start in the first DIMM slot, right? >>
Nope, Sorry, you go that wrong as well... Infact some Mobo's actually do better with the Slot labeled Slot3 or 4 even, this became...
I'd say go with the MAX,
the only advantage the G450 has over the G400Max is a Higher RAMDAC for the 2nd Head...
Everything else is the same, except of course for it's Crippled Memory Bus which in
turn limits 3D acceleration greatly... But it's not meant for that either...
If you plan on...
Jamarno wrote :
Stringy, if that's a genuine Ensoniq Audio PCI card and not just anything with a 1370 or 1371 chip, hang on to it because its analog sound quality its distortion, noise, and frequency response are unusually good, better than any SB Live.
Yes it is a true blue Original Ensoniq...
subman
I agree, I've seen this behavior as well, though, usually the "full load" temp is the same as the temp found in the bios screen, so it is still a concern and efforts should be made to lower such an extreme temp reading...
this is assuming that the probe reading is somewhat...
Just to add, there are more Server Groups with "Napster"-like services other than OpenNAP...
OpenNAP is the best, and like it's name suggests, it's OPEN...
They'll have fun trying to shutdown that pipeline...
it's akin to trying to stop Warez.. they've been trying that for over a...
Ouch!, that sucks...
Anyways, you have the options you mentioned... I did see a "Lug" repair kit floating around the net, prolly a link from Hard|OCP...
RMA'ing the board is going to be Difficult, it may happen but this kinda thing falls under User Error or User Abuse to tell you the...
Oldest hmmmmm
prolly my Ensoniq AudioPCI been there for years, had it when P200MMx's were new, like what '93-'94??
Closely followed by my Nanao 17" monitor, gorgeous, best $500 I spent... well, spent back then...
Craig
ATi's are notoriously bad FSB overclockers...
I haven't seen too many handle high FSB speeds...
Even the older Rage128 core didn't do well, 133FSB was
achievable if you were lucky...
by the 2 people who have radeons that responded, I think
AGP bus speeds of 100Mhz would be out of the...
Okies.. I've used just about every VideoConferencing App. out there and they all pretty much
stink for "quality"... ICU2 has Excellent video but lacks the finish of a MS-NM... NM can be
a pain to work with too... it just doesn't like some systems... but anyways I digress..
You need...
Well there are 2 with large storage that I know of...
this one is the best I've seen, mainly because you can remove and replace the HDD with ANY 2.5" laptop HDD, which is nice for a portable, after all HDD DO break, and you know they will continue to get bigger..
there is also the Creative...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.