Recent content by Sugeknight

S
Help with Gaming/workhorse build

acc to their site, it's $299 right now. Is it only certain locations? (I'm in VA)
- Sugeknight
- Post #8
- Jun 30, 2010
- Forum: Computer Building
S
Help with Gaming/workhorse build

Yes, about 20 mins. replace i5-750 with i7 875k?
- Sugeknight
- Post #5
- Jun 30, 2010
- Forum: Computer Building
S
Help with Gaming/workhorse build

Thanks for the reply. I've incorporated your suggestions. Would 8GB be the proper increase from 4GB then? I'd like to go higher than 4GB if it makes any sense for this config. I chose the regular G.Skill instead of the Ripjaws because I read the performance difference wouldn't be realized in...
- Sugeknight
- Post #4
- Jun 30, 2010
- Forum: Computer Building
S
Help with Gaming/workhorse build

1. What YOUR PC will be used for. some gaming, multimedia, development, file transers, file conversions 2. What YOUR budget is. $1800-2100 3. What country YOU will be buying YOUR parts from. US, Newegg 4. IF YOU have a brand preference. prefer Intel 5. If YOU intend on using any of YOUR...
- Sugeknight
- Thread
- Jun 30, 2010
- Replies: 16
- Forum: Computer Building
S
Incorrect Hard Drive capacity on XP setup

Great, thanks for the help and links.
- Sugeknight
- Post #5
- Jun 11, 2007
- Forum: Computer Building
S
Incorrect Hard Drive capacity on XP setup

Yes, XP. Original disk without any SP's.
- Sugeknight
- Post #3
- Jun 11, 2007
- Forum: Computer Building
S
*** Official Gigabyte P965-DS3 Thread ***

Will it create a 137 GB partition though?
- Sugeknight
- Post #2,028
- Jun 11, 2007
- Forum: Motherboards
S
*** Official Gigabyte P965-DS3 Thread ***

Thanks, I knew I was forgetting something. My setup disk is just really old...do I have to make a new setup disk?
- Sugeknight
- Post #2,026
- Jun 11, 2007
- Forum: Motherboards
S
Incorrect Hard Drive capacity on XP setup

I have the Gigabyte 965P DS3, 3.3 When I run windows setup it says my 320gig Seagate is 131070 MB. My setup disk is old and doesn't have the SPs on it. Am I SOL?
- Sugeknight
- Thread
- Jun 11, 2007
- Replies: 4
- Forum: Computer Building
S
*** Official Gigabyte P965-DS3 Thread ***

I have rev 3.3. When I run windows setup it says my 320gig Seagate is 131070 MB. I have my SATA burner on SATA0 and my HDD in SATA1. I've seen a few people indicate that XP should load without the need for SATA drivers. What did I screw up?
- Sugeknight
- Post #2,024
- Jun 11, 2007
- Forum: Motherboards
S
Ultimate Ears Super.Fi 5 Pro

I'd recommend checking out the Westone UM2. I tried several models/brands and the Westone's had the most balanced output. They're made really well and can use molds.
- Sugeknight
- Post #5
- Jun 11, 2007
- Forum: Audio Components
S
Building PC

It works when connected to the SYS_FAN
- Sugeknight
- Post #5
- Jun 10, 2007
- Forum: Computer Building
S
Building PC

Had case power in wrong pins. duh, for some reason I was thinking red from case goes to red on mobo. OK, It POSTs and gets to 'insert system disk' However, the cpu fan doesn't work. It's connected to the mobo, and it flinches when I hit power, but doesn't spin. any ideas on that...
- Sugeknight
- Post #3
- Jun 10, 2007
- Forum: Computer Building
S
Building PC

I have these parts: P180 E6420 965P-DS3 3.3 EVGA 7900GS 2GB Corsair XMS2 HX520 PSU I installed the cpu, fan, vid card, and ram. I connected the PSU to the 20pin, 4pin, and the vid card. The power button lights up blue on the front of the case, but I get nothing at all when I press...
- Sugeknight
- Thread
- Jun 10, 2007
- Replies: 4
- Forum: Computer Building
S
Last Call on Build

I had the Corsair memory in there originally, I can switch that back in.
- Sugeknight
- Post #4
- May 31, 2007
- Forum: Computer Building

RESOURCES

Top Bottom