Recent content by SuperKen!

S
Microsoft Blue Tooth Mouse problems

Here is a post that i cut and pasted from wirelessaddict forums Link
- SuperKen!
- Post #2
- May 29, 2003
- Forum: Computer Building
S
AMD XP2100+ woes

Ok, switching out a power supply yielded the same the result. Another interesting thing is when i run it at 130FSB Prime 95 will error immediately. When i took the FSB to 125 Prime 95 would work fine. Im not overclocking or anything.....could this just be a bad CPU??? Thanks for the replies.
- SuperKen!
- Post #15
- Mar 17, 2003
- Forum: Computer Building
S
AMD XP2100+ woes

Mark, your right about the 850Athlon, but I unlocked mine so I ran it at 133*7 so 933 MHz. BillyJack, mine boots into windows at 133FSB SOMETIMES, but right before login it would stall. Now, at 131FSB it will log into windows, but stall maybe 3 minutes after that 130FSB is working good now...
- SuperKen!
- Post #13
- Mar 16, 2003
- Forum: Computer Building
S
AMD XP2100+ woes

ok, I disconnected both CD/DVD ROM drives and windows still would not boot up at 133FSB. Curiously, i put back in my 128MB Micron RAM into a different RAM slot and it booted up at 130FSB. But, looking at cpuip and VIA hardware monitor, the vcore went down about .2v after i put in the other...
- SuperKen!
- Post #10
- Mar 16, 2003
- Forum: Computer Building
S
AMD XP2100+ woes

Thanks for the replies guys, I have the Antec 300W P/S that came out on top of Anand's first power supply review. Hopefully, that one is still good enough. If it isnt, please tell me. I will download memtest86 right now and check it out.
- SuperKen!
- Post #8
- Mar 16, 2003
- Forum: Computer Building
S
AMD XP2100+ woes

voltage is 1.75 temps range from 52-55C
- SuperKen!
- Post #4
- Mar 16, 2003
- Forum: Computer Building
S
AMD XP2100+ woes

oh yah, running latests BIOS A9, i coldnt flash to the 1.3 BIOS, awdflash wouldnt let me cuase of wrong hardware.
- SuperKen!
- Post #2
- Mar 16, 2003
- Forum: Computer Building
S
AMD XP2100+ woes

Hi, I am having problems running my XP2100+ in my Abit KT7A-Raid board (probably revision 1.0) For the past 2-3 years i have been running a T-bird 850 at 133*7 flawlessly. I have 2 stick of RAM 256MB Crucial PC-133 128MB Micron PC-133 First off let me say that i am aware of the "officially"...
- SuperKen!
- Thread
- Mar 16, 2003
- Replies: 14
- Forum: Computer Building
S
Abit-KT7A

I know that somebody must know
- SuperKen!
- Post #2
- Sep 11, 2002
- Forum: Computer Building
S
Abit-KT7A

What is the fastest CPU this board will unofficially support? Has anybody gotten a Palamino core to run on this board? Thanks
- SuperKen!
- Thread
- Sep 10, 2002
- Replies: 4
- Forum: Computer Building
S
Monitor has been scratched

Is this the Scratch Remover you used??
- SuperKen!
- Post #12
- Feb 19, 2002
- Forum: Computer Building
S
Monitor has been scratched

does anybody else have any ideas?
- SuperKen!
- Post #10
- Feb 19, 2002
- Forum: Computer Building
S
Monitor has been scratched

up
- SuperKen!
- Post #9
- Feb 19, 2002
- Forum: Computer Building
S
Monitor has been scratched

toothpaste didnt work for me. Any other ideas, or know what kinda waxes to get? Thanks
- SuperKen!
- Post #7
- Feb 19, 2002
- Forum: Computer Building
S
Monitor has been scratched

My NEC MultiSync FP series screen has been very lightly scratched. I think its only the coating, but when viewing the scratch with a white background, the scratched area just shows red, blue, and white colors. Is there anyway to get rid of this scratch, short of getting a new monitor? Thanks.
- SuperKen!
- Thread
- Feb 18, 2002
- Replies: 11
- Forum: Computer Building

RESOURCES

Top Bottom