Recent content by TELeast

T
Abit IP35-E POST problem

FIXED! I took the mobo, the cpu and the ram back to the shop and they tested it for me. It turns out the mobo was screwed and they swapped a new one and all was well. Installing WinXP as I type this. rhizaowns: if you already RMA'd it once, and tried different PSUs and GPUs, I think...
- TELeast
- Post #7
- Nov 20, 2007
- Forum: Motherboards
T
Abit IP35-E POST problem

Another thing I tried was to remove all RAM with only CPU and vid card connected. I was expecting the computer to give me a long beep or a double beep to indicate no RAM. However it did not beep and still the same nothing on the screen to see, monitor orange light. Is this normal to...
- TELeast
- Post #4
- Nov 20, 2007
- Forum: Motherboards
T
Abit IP35-E POST problem

I did all that already, and let the CMOS clear sit for overnight (fell asleep), still no POST screen on monitor. The power supply was also changed to a 550W PSU with sufficient current on the +12V rails to ensure it wasn't the PSU problem I also tried using a PCI video card (found a very...
- TELeast
- Post #3
- Nov 20, 2007
- Forum: Motherboards
T
Abit IP35-E POST problem

Hi guys, need help Just bought new IP35-E, Pentium Dual Core 2180, Patriot Signature Line Memory (psd22g800kh) 2 x 1GB, 8800GT, WD3200WS SATA HD. Put it all together with my old Enermax EG465P-VE It powers on, all the fans run, but nothing on the screen. I tried unplugged and...
- TELeast
- Thread
- Nov 18, 2007
- Replies: 10
- Forum: Motherboards
T
FX5700 Lite overclockability

I just bought a Leadtek Winfast FX5700 Lite card with 128RAM the RAM chips are 5ns Hynix default speeds are 250Mhz/400Mhz I tried 350Mhz/450Mhz and played hours of Joint Operations without any problem anyone have tried overclocking a similar card and what are the results?
- TELeast
- Thread
- Jul 8, 2004
- Replies: 0
- Forum: Graphics Cards
T
Boot problems using RAID-0

Here's my config: P4 2.4C Samsung 256MB DDR400 RAM IS7 (BIOS 1.5) 2 x IBM 45 GB drives (yes, my pair of GX75 are still running smoothly due to double 80mm fans blowing at them) 1 x Maxtor 60 GB drive 1 x LiteON 52x Abit Ti4200 Sound Blaster Audigy anyway, here's the problem: -setup RAID-0 on...
- TELeast
- Thread
- Aug 17, 2003
- Replies: 0
- Forum: Motherboards
T
*** Official ABIT IS7/G/E (865PE) Thread ***

I just got the IS7-E it has a 3Com chip on it. I tried installing both Win98se and Win2K, the ABIT driver CD autodetects and requests to install the 3Com gigabit LAN driver. I tried Realtek drivers in Win2K - didn't work. In Win98se, I tried both the 3Com and the Realtek drivers...neither...
- TELeast
- Post #150
- Jun 20, 2003
- Forum: Motherboards
T
HELP: video card not work on motherboard

I would if I could return them the problematic board and vid card were both purchased 2 years ago... and it seems it's an imcompetability problem...which more or less exists in all hardware.
- TELeast
- Post #5
- Jun 4, 2003
- Forum: Computer Building
T
HELP: video card not work on motherboard

I haven't checked the menus regarding AGP voltages...however... The matrix: ..........................Inno3D GF2MX400........WinFast GF2Pro..........ABIT GF4-4200.......WinFast GF5200 ABIT KT7A ....................OK.............................not...
- TELeast
- Post #3
- Jun 4, 2003
- Forum: Computer Building
T
HELP: video card not work on motherboard

I have a computer with ABIT KT7A board. It has been using an Innovision3D GeForce2 MX400 32MB card for a few years Recently, the computer hangs when playing games - it hangs 99% of the time within 5 minutes into a 3D game. After checking, I have concluded that it was the video card at fault...
- TELeast
- Thread
- Jun 4, 2003
- Replies: 4
- Forum: Computer Building
T
I845G outperforms I845E in every test!!!! which mobo has 845G ?

I just bought the MSI 845G Max 2 days ago it was the only i845G board I can find I am in Hong Kong. I was hoping to buy the Asus or Abit boards but they are not out yet. I have seen a review for the Abit eng sample for the i845G a few days ago too. I just installed windows in the new system...
- TELeast
- Post #37
- May 24, 2002
- Forum: Motherboards
T
Are the Malaysia P4's suppose to be better overclockers?

I have built 5 to 6 P4 1.6A systems in the last 4/5 months. I have had a mix of CostaRica and Malay chips and I do think they are both equal I have had an Malay chip that can do 2240Mhz but I didn't push this one to the max. the maximum I ever got to was 2400Mhz using a CostaRica chip I also...
- TELeast
- Post #6
- May 24, 2002
- Forum: CPUs and Overclocking
T
My fan is loud!! Tell me what fan you use for your cpu!!

> Is P4 1.6A stockfan quiet? > I think I will even change the cpu if it is that quiet!!! Yes the P4 stock fan and heatsink are quite enuf for everything. I am using them now to overclock 1.6A to 2.4Ghz And the stock fan is really quiet...nothing like the power beasts that I used to run for...
- TELeast
- Post #10
- May 24, 2002
- Forum: CPUs and Overclocking
T
My fan is loud!! Tell me what fan you use for your cpu!!

When I was using the Athlon CPU I had the delta 60mm 8000rpm super blower outputing 56 dB of music but now I am using P4 so just using stock fan
- TELeast
- Post #2
- May 23, 2002
- Forum: CPUs and Overclocking
T
New Rig 1.6a help please

Just to add you may consider the ASUS P4S333 or even P4S533 I have built a few computers using these 2 boards they also kick ass and can overclock just as well as the ABIT board I don't use it myself becoz I bought the BD7 before I took noticed at these 2 boards, plus I needed the RAID, and I...
- TELeast
- Post #9
- May 23, 2002
- Forum: CPUs and Overclocking

RESOURCES

Top Bottom