Asus A78nx rev 2
new Uder bios 1004r2c
xP 1800
2 sticks Crucial 2700
I can boot up at stock speed @ 133 bus speed but when i change the fsb i get xp at 1150 in the post screen and it wont allow me to boot any further. I have not unlocked this chip but I should be able to change the fsb any...
The fastest this board will do is 110x12.5. The new bios allows a morgan core cpu to be used. I run a 1 gig Duron at 12.5 x 110 but it is unstable so i usually go 105 X 12.5 = 1312. The quality of your ram and youir memory timings will affect your o/c. Feel free to unlock it and also bump up...
Duron 1000 morgan unlocked
Asus A7Ve MB
2x256 meg PC 133 1 generic 1 CrucialCAS2/CL2 @146 mhz
MSI geforce3 Ti 200 @ 250x500 removed the stock cooling heatsink and mounted the duron cooler with AS epoxy
mounted the fan for the MSI onto the North bridge replaced the pins with AS epoxy
2 panaflo 92...
I have a duron 1000 at 1375 pushing a Msi Geforce3 Ti200 at 250 500 and I run Q3 at 1280x1024 with Fsaa turned off and Anisotropy set to 8 tap with the new 30.30 Detonators and I get well over 100 frames per sec. If i turn Fsaa on i get like 40to50 fps.
1280 x 1024 Rocks !
Try powerstrip it seems to be the best for tuning all settings on most vid cards. What mother board do you have ? If you have a VIA KT133 or newer board try here http://www.mods4me.com/reviews.php?op=showcontent&id=3 you can changre the chip set registers on a whole wack of settings.
Good luck
My duron 1 gig does 1375 110 x 12.5 on an Asus A7V-E. Thats with 1 stick generic PC 133 and 1 stick Crucial PC133. With a Volcano 2 temps are 32 C and 45 under load running at 7 volts.
Whats your front side bus at ?. With my Geforce3ti200 anything above 110 MHz causes D3d games to crash but any OGL games run fine. Mabe your AGP bus speed is out of wack.
I tried increasing it to E A in my bios but I still have crashing problems running Dungeon siege. I really dont know enough about what drive strength does. I think I have just reached the limit of how far my AGP bus can O/C. Also at this speed my memory is PC133 running at 147Mhz. I might try...
My Duron 1000 does 1375 (12.5x110) quite easily at the stock voltage on an Asus A7V-E MBO. This is the highest multiplier and bus speed my MBO supports so I dont see why the Duron 1100 wont do close to 1500. My MSI Geforce3Ti200 doesnt like the 110 Mhz bus speed so i normally run it at 105x12.5...
I currently run a 750 Duron @ 103x9.5 which gives me 978mhz. I wanted to break the 1gig barrer so I bought a Duron 1000 figuring I could get close to 1300 out of it. According to the MBO manual it supports processors up to 1 gig but when I unlocked the L1s I got nothing no boot no nothing. I am...
I have a Geforce 2MX running on a Duron 1000 system. I am trying to run the Det 29.20 drivers because they seem to be the only drivers that work with Dungeon Siege.The only problem is that I get no DVD playback. When I boot my system I get an error in Nvqtwk misssing entry:NvcplDaemon. My Dvd...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.