My roommate saved some files into a folder which i'm unable to delete. There are 2 files each with 0 KB filesize, no file extension, they appear to be hidden and associated with Word somehow. They were supposedly a resume he was sent by email.
When I try to delete the folder it says "Cannot...
Spidey , If you could take the time to explain to me why it would be slower in terminal services I'd appreciate it. I'm not disputing what you've told me (I don't know enough about netowrking to dispute anything you say), I'm just simply curious.
Just to specify , I'm running TS in remote...
I've got 2 pc's here , my main pc - Windows XPSP2 tests 2476 Kbps down and 664 kbps up. My Windows 2003 Server tests 1886 kbps down and 664 kbps up on the same site (speedtest.cogeco.net). Both tests were run after clean boots. I usually access my server through terminal services and ran the...
Thx melijak , I just reassigned all the "special ctrl" directional keys to the arrow keys and that got me past the Cesar mission.
Still can't seem to get the right analog to control all camera directions and I haven't been able to get the gamepad to control the target on manual mode...
I can't seem to get more than 1 axis out of my right analog stick. With default settings if I move the stick left or right the camera moves up and down. After playing around with some of the Invert settings in the joypad config menu , I was able to get the camera moving left or right with the...
System is flaky with both of my dimms installed too. I think I'm gonna request an RMA for the board and ram too. Maybe this board would prefer some Kingston dimms installed.
Ive got a set of 2 512MB Corsair Value Select Dimms in my pc now , Im going to swap them and test out both sets to see if my dimms test bad in the other pc and how the other's test in mine. Should give me an idea if it's a dimm issue or motherboard issue.
I'm also using a 20pin atx on the...
The ram voltage is set to default. I installed Asus Probe and it doesn't seem to display Mem voltage, neither does motherboard monitor or cpu-z. Anyone know a decent utilty to see what voltage the board is setting it to?
I did manually set the mem voltage to 2.7 and command rate to 2T and it...
From what I remember in cpu-z the dimms were at 200mhz DDR. They are pc 3200. Ive got 1 dimm on memtest now which is telling me it's running at 201mhz so that's fine. All settings are on Auto in the bios now like they were when i had 2 dimms in there.
They also seem to run at 2.5-3-3-8 with...
I'm building a pc for a friend's uncle who isn't going to do any gaming but who still wanted something fast and was willing to pay 1000$ Canadian for the pc alone with no monitor or peripherals so I got him the following:
Asus A8N-E Nforce 4 motherboard
Athlon 64 3200+ S939
Corsair Value...
The driver won't let me set it to 75 unless I uncheck the "Hide modes that the monitor cannot display". I'll try it and let you guys know if the problem persists.
And according to the setup guide , 75hz is the recommended refresh rate for this monitor.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.