Those extra funny capacitors don't make you THINK it's better it IS BETTER. Also with 8 Sata's two of those are used as Esata which enables all sorts of things (box comes with a 2esata bracket). It's extremely handy for hooking up temp storage to dump a dupe of important data etc. I have a...
I thought those two examples were what the condom was put on to PREVENT in the first place. Silly me. :)
And a helmet doesn't guarantee safety either. I've seen plenty of cracked ones on dead people :) (motorcycle or bike) The only way I see that's 100% is abstinence (IE, don't buy a PC...
I think this place bashes the Inq to much, they have a LOT of good reports and a lot of things people bash them for immediately but they come true a few months later. They usually beat this place to the punch also. Heck I read the news there and already have the story by 6am, when it's not...
If you want lower volts then go 5-5-5-15 which should allow you to lower it to 2.1v I'd hope. Maybe less. 4-4-4-15 is pretty tight timings, 4-4-4-12 is tough for sure. That takes high volts or very good memory (as you've already seen high volts :)). OR maybe 5-5-5-18. We're not talking a...
Jeez, I almost feel stupid for not telling you to raise the volts after telling a guy to do it in another thread last week to get his 4 dimms working..ROFL. Glad you got it working.
http://forums.anandtech.com/me...=2172234&enterthread=y
If you're worried about high voltage you could...
I'm thinking either compatibility issue, or bad board. You've tried nearly everything else :) Sorry you're having such bad luck here. When all else fails change the common denominator (the board). :) I wish you better luck ;) Two different Antecs, working fine with other boards means it's...
http://www.anandtech.com/casec...owdoc.aspx?i=3173&p=16
Excellent for Antec 1000w, reviewed right here.
http://www.anandtech.com/casec...howdoc.aspx?i=3186&p=2
Editors choice for the Antec Truepower 850w PSU of the year (note seasonic makes a lot of their psu's, and guess who is...
Lower your timings to 5-5-5-18 and set to 2.3v. IF that doesn't work try 2.4v. No I'm not saying keep it there, but just to find out if it's stable. There are many cases where you can run fine at 1.8v 2 dimms, but going to 4 creates a load on the slots that requires much higher. Consider it...
If we're actually talking Q6700 ($370 cheapest I find) here, the comparable chip is the Q9450/x3350. It sells for less ($350) and has an 8x multiplier. Which even with crappy DDR2 800 memory should read 3.6ghz no problem (450fsb, 900mhz memory). Even my cheapo ADATA can hit 1000. Anand just...
Anyone telling you that two rails with 17A each rail is inadequate for Integrated video is just plain wrong (I read that grey bear guys response to you...LOL). You may have an incompatible model. I blew two MSI boards in a day, and when I took them back to ASI they had already received another...
If you say it's hooked up correctly, I'm wondering if you have it in the wrong spot? Perhaps you've plugged into a case fan header and are monitoring the wrong thing? The CPU fan error would usually be wrong the cpu fan plugged into the wrong header or plugged into a 4pin molex so the board...
Speedfan shows my 4 drive temps. 28c,27c,34c and 29c. I think the coolest ones are being directly blown across by my front 120. The topmost and bottom one get some of it and run hotter. But it should show all of his drives (since you mention speedfan).
The Weather channel? I'm sorry you...
Illustrating the overkill I mentioned. I agree though I think your PSU is likely bad.
My bad, I just read the OP's comment and felt it should be addressed. I should have just answered you. :)
[EDIT] I'm currently running an Antec 450w, with my 3.6ghz Xeon 3110 (3ghz@3.6), and 4 seagate...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.