One other thing.
Epox tech support won't tell me what the 2b error code is.
They just keep saying it is the power supply and/or update to the 6/09 bios. This bios is not even on there web site.
Thanks,
David
I am building up a system for a Epox 8rda+ but I am having some problems.
System
C1 board stepping
Antec 350 W power supply
Athlon XP barton 2500+
ATI Radeon 8500
Crucial pc3200 memory
WD 80 gig drive
Here is the problem.
When the system is booted from power off it will most of the time stop...
I got usdm off the install cd.
SpideyCU I have the same problem as you. My bet is that your are using the large fonts (120%) the same as
me and that the program doesn't know how to compensate for it.
My guess is that the problem lies with the motherboard.
Just by the way it is acting no...
Insane3d,
It doesn't appear that the USDM program works on the 8rda board.
I searched the epox site found both versions but neither states that it will work
on this board.
Thanks again for the help.
David
Ok I went into the bios and adjusted the vdimm to 2.5 volts.
Now the +3.3 v sensor in sandra and MBM reads 2.5 v
So Insane3d was absolutely correct that this is the vdimm reading.
Insane3D
I did download motherboard monitor and it says the +3.3 V line is at the same voltage.
The manual states that error code 2b is reserved.
If I look in the bios it doesn't even monitor +3.3 v.
It lists
Vdd 1.58 V
Vcore 1.66 V
Vdimm 2.75 V (which may be what sandra and MBM are stating...
I am building up a system for a Epox 8rda+ but I am having some problems.
System
C1 board stepping
Antec 350 W power supply
Athlon XP barton 2500+
ATI Radeon 8500
Crucial pc3200 memory
WD 80 gig drive
Here is the problem.
When the system is booted from power off is sometimes will stop at 2b...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.