Nice rig. BTW i have the same case and my front door LEDS did not work for 2 days then poof magically they came on and never went out again. Gremlins i guess!!
Case is great and has nice features but honestly it could be much easier to work with such as removable mainboard tray and the...
Ok 1st the specs
MSI K8T Neo-FIS2R
A64 Clawhammer 3200+ (36c idle & 43c full)
1 Gb Hyper X PC4000 (slot 1 & 3)
Thermaltake 480W Xaser (2 days old)
BBA Radeon 9800 Pro
Audigy 2
NEC 3500 DVD/RW
Lite-On 16X DVD
2X 120GB IDE (no raid)
XP PRO SP1
Ok here ii the issue and the...
Yeah that is high. I have a Chieftec Dragon case with an A64 3200+ Clawhammer @2.2ghz with the STOCK cooler with paste scraped off and AS5 on it.. 3 80mm vantecs in case. I run folding@home on it 24/7 100% CPU load and temps never go over 53c
You have either way to much AS5 on or bios is...
Yes thats right. At best buy you can get Microsofts preview (nonplayable) demo dvd of Halo 2 along with a genuine all new X-box Controller + coupons for $9.53 shipped including tax. I grabbed 2 just for the controllers well worth the money. I did instore pickup.
Linky
yes i have seen it happen before. Try unplugging the drive and restarting then shutdown. hook the drive back up and it just might see it again. It's sick but it does happen. Make sure it is the slave position as well. Hopefully you will be able to get in. If you really thing a controller has...
Try putting in only the bad drive and plopping in your xp cd and booting into repair mode try using chkdisk /r command (may need to do several times)
If you need to you can do this
Install the recovery console by typing "winnt32 /cmdcons" from a cmd prompt in the I386 install directory of the...
are you typing in the exact key that the router has? If so don't do that! have the card make you a key by using your passphase name or whatever linksys uses.Instead of manually entering it. I have netgear. Can't say that is your issue but give it a try if ya can.
master /slave is set by the jumper on the pins on the rear of the drive. they are located right between the power connector and the IDE connector. Should be 5 sets with 1 set missing a pin not all drives have the jumper settings the same. so you can simply remove the jumper (the little plastic...
I do it all the time. Do an advance RMA repack your drive in the box they send you make sure you get it back to them ON TIME and you do not even need error codes simply say the software will not run on your machine and the drive is randomly clicking or the MBR keep getting messed up. I have done...
You are referring to 2 optical drives correct? one is a cd-rom the old drive is a DVD-rom? if that is the case did your OS recognize the new hardware after you installed it and rebooted? Look in my computer and see if the drive shows up if not then you either have it hooked up wrong or need the...
They guy with the 100,000 shack post is just retarded. It all depends on where you live. My exact home yes exact by the same builder goes for $70k more 8 miles south of me with 1/2 the lot size and we have a better neighborhood and schools and less crowded. And to top it all of 1% less sales...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.