Recent content by tippmann

T
Didn't know where to post, I will be moving to a RAID 0 setup on my comp

Does your board support more than 2 SATA ports? If not you will have problems creating the Raid volume and then copying data to of the old drive. Once you create the Raid volume, you should be able to copy data to it just like it was one drive. Acronis or ghost will work fine
- tippmann
- Post #2
- Sep 19, 2007
- Forum: Computer Building
T
Freeze ups in Home network every 45 seconds?

I cant think of anything in XP that would casue that? I am thinking hardware or router config I am guessing you are using IP - what IP segment are you using behind the router? 192.168.0.X What happens if you connect the "cat5" pc to the cable/dsl modem without the router?
- tippmann
- Post #7
- Jan 20, 2004
- Forum: Networking
T
Freeze ups in Home network every 45 seconds?

Does this happen with both systems or just the wireless?
- tippmann
- Post #4
- Jan 13, 2004
- Forum: Networking
T
Weird Domain Issue

I had similar problems... I ended up changing the computer name and removing the the old compter name form AD before it worked again. I don't think it would have anything to do with the user account. Maybe the nic?
- tippmann
- Post #9
- Jan 13, 2004
- Forum: Networking
T
Want to buy a new All in one printer ... plz help

On the epson printer questions Justorq - No the print cartridges do not have print heads on them... If you use your printer a lot and print daily you usually won't have any problems for a few years.... If you print once or twice a week an epson isn't for you.... The heads will dry up. If...
- tippmann
- Post #12
- Apr 28, 2003
- Forum: Computer Building
T
Can't install an OS. Never seen this problem before.

I had similar problems with a clean install and it turned out to be a bad cd drive?
- tippmann
- Post #7
- Feb 15, 2002
- Forum: Computer Building
T
How to determine a pwr supply is working?

Usally when I see the no power on a newly assembled pc, I start over.... Reseat the cpu and remove everything else, check the power If you still dont get anything, you have a bad part, ps, cpu, or mobo If you do get power add other parts one at a time and check power as you go--- add...
- tippmann
- Post #3
- Feb 15, 2002
- Forum: Computer Building
T
any comments on generic ink for the Epson 880?

There ok if you are not looking for any high quality...
- tippmann
- Post #3
- Sep 21, 2001
- Forum: Computer Building
T
MSI Geforce 2 pro

All the same if you are planning on using the Nvida beta drivers....
- tippmann
- Post #4
- Aug 2, 2001
- Forum: Computer Building
T
Suggestions: Cheap Duron MB that will go Athlon Later?

Several friends and I have purchased the Iwil KK266 ($110) They have worked great everytime...
- tippmann
- Post #2
- Aug 2, 2001
- Forum: Computer Building
T
Which sound card?

Santa Cruz
- tippmann
- Post #3
- Aug 2, 2001
- Forum: Computer Building
T
Help with sound card detection in Win2K

I believe the Aureal chipset is not supported under ME or WIN2K...? could be wrong???
- tippmann
- Post #3
- Jul 10, 2001
- Forum: Computer Building
T
Video Card Help

Go for the PowerVR KYRO II 64MB - it easily out performs an MX card.... It is closer to my geforce 2 Ultra and for around $115 you cant loose....
- tippmann
- Post #4
- Jul 10, 2001
- Forum: Computer Building
T
Win98 Problems

The way I fixed my "cant find himem.sys" errors was to format? I also copy the files to the HD to make sure it isn't a cd drive problem... Boot with 98 boot disk at c: "md win98" go to cd rom drive (d:) and get into d:\win98 dir and type "copy *.* c:\win98" with...
- tippmann
- Post #2
- Jul 2, 2001
- Forum: Operating Systems
T
Win2K drivers fior TNT2 Ultra??

The newer Nvidia's Detonator drivers don't seem to work well with the older TNT 2 cards... Try and find some older drivers like 3.8... I used the driver off of my Geforce 2 ultra cd for my TNT2 Ultra card. I think the choppy video comes from to slow of a gpu not the drivers
- tippmann
- Post #2
- Jul 2, 2001
- Forum: Operating Systems

RESOURCES

Top Bottom