I swapped back in my old psu and everything works fine. I put in the new fortron and it doesn't boot. This is retarded. i called fortron and they hung up on me twice and kept saying they would email me instructions on how to test a psu. I know what they are doing....just trying to buy time until...
OK, I got the adapter at frys. But the computer turns on for a split second, then back off. Same thing it did without the 4 pin plugged in. This is very strange :(
-Collin-
Hey all,
I feel like an Idiot because I just bought a Fortron FSP550 to go on my DFI NF4 Ultra-D and didn't notice that it had no 4 pin ATX connector. Does anyone know if there is an adapter to use one of these strange 8 pin plugs or 6 pin plugs? I have no idea what they are! Or, would a 4...
OK, I bought a Compaq Presario 1700T which came with an 800mhz celeron. I had an old 850mhz P3 cpu from another laptop that was destroyed from water damage. I figured the CPU was fine. Anyway, I installed the new cpu in this laptop and it wouldn't boot. Everything turned on, but the screen was...
As already mentioned....the ram being run at a different speed than your fsb is going to make performance drop. But, it won't hurt anything if you don't have money for new ram. Check the for sale/trade section, there are very good deals to be had on some pc2700.
-Collin-
What you are experiencing is the on die memory controller's limits. This is a common problem with the Athlon 64's. I can run up to 300HTT with the same board stable, but not at 1:1. My TCCD ram runs just fine up to 300mhz, but the memory controller cannot handle it. If I use only one stick...
I couldnt agree more. This board has more voltage and overclocking options than almost any nforce 3 board there is. 3.2 volts ddr is awesome for getting crazy fsb speeds. I run mine at 275mhz fsb at 1:1 with my samsung ram. It's been a great board!
-Collin-
Yeah, I checked it out. They don't have my board listed. One of the Gigabyte boards are incompatible, and the rest are compatible. I really don't want to take a chance here. :(
-Collin-
Does anyone know if this board works properly with the OCZ DDR Booster? I have searched high and low and want to know before I shell out $50. :) Thanks a bunch!
-Collin-
Tried the AGP aperture and the fast writes off....still the same exact thing. I am wondering if I screwed something up when I did the driver cleaner. :(
-Collin-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.