i was thinking of upping the VTT first, and then loosening the CAS last.
if those 2 things don't let me OC my ram to 1866, then i wont bother.
BTW - i am not a noob to o/c'ing. been doing it since 486's
i am just new to the I5 cpu's and mobos
to the "tweakboy" poster. i cant run...
ram:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820233186
motherboard:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813128501
cpu:
2500k
i have 4 x 4gb installed. i know that makes overclocking a little harder, but i thought i still should get one speed bump from...
e4300 batch date (5-1-2007)
i was able to boot & run memtest with the e4300 @ 3.6ghz (9x400) @ 1.5375v
i was able to boot into xp & run 3dmark2001se with the e4300 @ 3.49ghz (9x387) @ 1.5375v
all benchmarks were run with the system in my sig & nvidia drivers v93.71
the ONLY difference was...
has anyone been able to reach 1000mhz with SUPER TALENT DDR2-667 (T6UX2GC5)
http://www.ewiz.com/detail.php?name=T6UX2GC5
if so what timings & voltage did it take ?
i have created slipstreams of XP sp2 & w2k sp4 with lots of registry hacks. they work perfectly except for one major problem. ie6 will not run flash, and firefox will. i gather one of my registry hacks messed up ie6 ability to run all flash sites.
i can even goto adobe's website, install...
presently i have a xerox phaser 7300 and it is dying.
i need a new color laser printer that can handle 11x17 card stock paper.
print TONS of card stock and odd size paper.
ok i have the above mobo. (asus p5n-e sli)
i have had my ram in the same channel and the same color slots. both ways i get the exact same score in sandra and cpu-z says both ways i have dual channel running. bios does NOT tell whether you are running dual or single channel. so i know of no...
why not ?
it sounds logical to be able to do what i want to do.
i have 30 users on the cisco switch.
i have 6 users on the netgear switch.
i have 2 cables that run from the patch panel in my office to the patch panel
at the other end of the building.
right now the 2 switches are...
i have a cisco catalyst 3500xl (48 port) 100base
i have a netgear fs524 (24port)
they are about 200 feet away from each other.
i was wondering why i cannot plug port 47 (cisco) into port 23 (netgear)
&
port 48 (cisco) into port 24 (netgear)
when i do this. ALL the lights on my cisco...
i thought my 2 servers were having nic problems or some type of network problems. after all the settings and all the checking, it seems it may actually be my scsi is overloaded.
i am looking for a utility that will tell me how hard my adaptec 2120s scsi raid controller is getting hit.
i have a cisco catalyst 3500 xl switch. it is managed as far as i know. but i have not seen a way to see the bandwith usage for each workstation without going thru that hard to read log file. plug it only gave me total info.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.