Recent content by tsears

T
How do you remove "run" in Win2k?

1) start->run "mmc" 2) console->add/remove snap-in, click add 3) select "group policy", click add, click finish, click close, click ok 4) expand local computer policy, expand user configuration, expand administrative templates, select start menu and taskbar 5) right click on "Remove Run menu...
- tsears
- Post #16
- Jan 24, 2003
- Forum: Operating Systems
T
SETI: Welcome our newest members - Tom Sears and MrBeAr

Thanks for the welcome guys... All three of my rigs are currently processing packets.... Check out my rigs (should be linked in my sig) if you want to know what kind of power is working on this. I've been doing seti@home on and off for a few years now, and finally decided to join a major...
- tsears
- Post #10
- Jan 24, 2003
- Forum: Distributed Computing
T
My Apologies for my ignorance!

Hey, First off, it's not a problem to ask, that's what these forums are for! As for finding out what type of chip you have. It's printed right on the core. If you're already using this system, you're gonna need to power it down, then take of the HSF. Wipe the thermal goo off the chip and...
- tsears
- Post #2
- Nov 2, 2001
- Forum: CPUs and Overclocking
T
How can I passive cool My P200 MMX

How to Passive Cool a p200.... put a heatsink on it =).... Seriously, my step dad ran a p266mmx for YEARS without a fan on the HS. Still works great too! Any cheesball HS should do.... Tom This is a setup that has worked for me and my stepfather as well... I will not take any responsibility...
- tsears
- Post #5
- Oct 8, 2001
- Forum: Cases & Cooling
T
Can you reccomend a book..?

Hehe.. there is always the Win2k Resource Kits.... look for the Win2k Server resource kit. As an added bonus, you can use it for weight training WARNING: It's probably gonna cost you a finger or two.... Tom
- tsears
- Post #2
- Oct 8, 2001
- Forum: Operating Systems
T
What Dremel cutting bit should i use for cutting out case windows?

I've used both.. I prefer the Dremel, it's cuts are just alot cleaner, and its alot easier to cut a radius with a dremel. It pains me to think back to cutting my first 80mm fan hole with a jigsaw, it was just disgusting when I was done. I use those fiber glass reinforced cutting wheels (and...
- tsears
- Post #5
- Oct 8, 2001
- Forum: Cases & Cooling
T
Prebending a HSF clip and thermal compound

You probably shouldn't bend the clip too much, you want that little bad boy to be pretty tight on the core of the chip there. As for the thermal paste... a VERY thin layer is what you're looking for. what I usually do is squeeze the tube a tad while the lid is still on, then I remove the lid...
- tsears
- Post #2
- Oct 6, 2001
- Forum: Cases & Cooling
T
Anyone using TweakMonster Ramsinks on Video Card?

If nothing else, they do look kind of cool =) Tom
- tsears
- Post #5
- Oct 6, 2001
- Forum: Cases & Cooling
T
New Koolance case worth the $300 for it?

Hard OCP seemed quite impressed with Koolance's latest offering, explaing exactly how they grew since their last all-in-one watercooled case solution. Check out their review. I am deeply debating buying one now (that Delta Screamer on my WBK38 is going to make my head explode soon) Tom
- tsears
- Post #3
- Sep 28, 2001
- Forum: Cases & Cooling
T
Question about FSB and memory

if your motherboard is based on the Via KX133 chipset, there should be either a jumper or option in BIOS to run your memory at either 100 or 133. If it is and AMD 750, you're sort of screwed. Good luck! Tom
- tsears
- Post #6
- Sep 20, 2001
- Forum: CPUs and Overclocking
T
Iwill kk266plus USB Problem

I had the usb problem as well I flashed the bios, and cold booted -- after that my intellimouse optical worked just fine! Personally, i rather like the IWill board. I have a KK266+, a good friend has a KK266, and my girlfriend has a KK266-R, none of us have problems. Both my friend and I are...
- tsears
- Post #5
- Sep 17, 2001
- Forum: Motherboards

RESOURCES

Top Bottom