he does not have a wireless router currently, this will be a new setup
If possible, i was hoping to get a router with good enough range to cover the area on its own..
If that doesnt work, plan b will be to also add a wireless repeater.. but would really like to make it as simple and idiot...
one of my coworkers just got an ipad and wants to be able to use it by the pool
i typically use price and hackability as requirements for my purchases like this
but one of his biggest things is wanting to make sure he has coverage at his pool..
a booster is possible, if completely...
i decided to tinker around with a spare machine i have laying around, to use as a media center pc. mce 2005 is currently installed.
I have a geforce 6600 in this old machine.. Today i stopped off and picked up a dvi to rgb rca cable, figuring it was the easiest way to connect quickly.
i...
anyone know where i can get a package copy of freetds for solaris8?
i know i can download the source off freetds.org and compile it.. but am trying to save myself the trouble
thanks
dude, your my hero!
its been such a long frustrating day, there was no way I was going to think clearly enough to work through it
and i was working it backwards.. rather than taking the easier way out that was right in front of my face
that worked like a charm
thanks again
ed seems to be a pain in the butt.. but Ill read up on him if I cant find a better way
what would be the syntax to manually mount var, assuming its on c2t0d0s4?
ugh
so, I was setting up my disk mirroring.. and edited the vfstab with vi
but it seems I accidently put /dev/ms instead of /dev/md for the mounting of the /var partition
so of course it cant mount var, so it wont let me boot normally
i have to log in into maintenance (single user) mode...
nothing yet
my current mb is still ok for now.. until i make up my mind which is the best way to go
Im borderline on whether to just replace my board cheap with a disposable one off ebay, or some other used board
or to wait around for more suggestions (and of course look into diff options...
i should have included that in my specs
Ive very firmly against the via chipset.. Ive never had anything but problems with them, and dont know many people that recommend them
sure, works fine for some.. but i prefer to stick with the intel chipset
well.. one of the capacitors on my current mb is about to go bad.. asus p4b266
so I guess its about time to pickup a new motherboard..
Im running a northwood 1.6a @ 2.4 (full load temp is 39c)
but over the past few months, Ive stayed so busy at work that I havent been keeping up with the...
actually.. i didnt think it through all that well
i was figuring my current fan = 2 3/4 inch.. plus just over 3/4 inch spare between that and the psu.. which gives me about the 2.6 inches needed for the 92mm
but i didnt account for the fact that I only needed half the space on one side...
Im looking at picking up a sp-94, but also need a fan
Im considering the 92mm panaflo, but its borderline on whether its going to fit in my case.. if it does fit, I think it will be butted up against the psu.
my current processor fan is 2 3/4 inches.. and I have just over 3/4 inches between it...
well.. Ive also got the stock fan laying around here somewhere.. but I know the volcano is at least better than that..
Im looking for a slightly better option, because I would prefer not to be up as high as 50 celcius without a full load
well.. i think its about time to go ahead and upgrade my cooling and maybe my power supply.
Ive got a northwood 1.6 overclocked to 2.4 (had to do the loop trick and raise my vcore settings)
vcore hangs out around 1.77 (which is why I think i might have to replace the psu as well)
Ive had the...
Im pretty sure they are the same drive, just different packaging
but it sounds like if you get the 100 + 20.. then you have a chance for the 8mb drive
but if you get the 120.. then your going to get what you pay for (2mb)
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.