I've been running a Maylay Cel566 at 850MHz for over a year now on two different boards with Win98 and 2K. It's rock stable and always boots even with just a +0.05 bump on the voltage. The 566 is usually an easy OC to 850. Try bumping the voltage if you need to. I'd also try a conservative...
Hello Egrimm,
I run some old slow Celerons myself. The 333 Slot 1 we have in a server is OC'd to 450 (90X5) on a Asus P3V4X with nothing special in the way of cooling except that I slathered some Arctic Silver between it and a cheapo HSF the last time I had it off of the board. I believe the...
Hello Again,
Back to the clip. When you took it off did you notice if the pressure point was directly over the cneter of the cpu? This is critical because of the four rubber pads on the Athlon. If the clip is off center it will compress the two pads on the back side more and cause the HS to not...
Hello,
I had a similar problem with the sk-6 what you need to do is check the clip becasue it is made with the pressure point offcenter so that it applies pressure over the cpu slug. If the clip is on backwards it will not put full pressure on the slug. With the clip on backwards the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.