Recent content by vicvon

V
Do I need an adapter for this powersupply to this board?

You should not need anything extra to connect this PS to this motherboard. The PS says it is P4 compatible which means it will have the 12 pin + a 4 pin connector.
- vicvon
- Post #2
- Feb 26, 2005
- Forum: Computer Building
V
K8NS memory speed

when you enter the bios, press ctrl + F1 and that will give you the extra options.
- vicvon
- Post #9
- Aug 1, 2004
- Forum: Motherboards
V
Why does my quick launch turn off?

Strange
- vicvon
- Post #3
- Aug 1, 2004
- Forum: Operating Systems
V
K8NS memory speed

Go into the bios and set it manually to 200.
- vicvon
- Post #6
- Aug 1, 2004
- Forum: Motherboards
V
K8NS memory speed

It is normal but I think it is fixable with the newer bios's. Update to the newest bios and follow what AyashiKaibutsu said.
- vicvon
- Post #4
- Aug 1, 2004
- Forum: Motherboards
V
Is this RAM gonna work for me?

If you are going to get ram, this is excellent stuff. At preasant, I run two sticks of the OCZ 3500EL 256mb and it works great on my A64 3000+. In fact, I can get it to 230 mhz with stock voltage 2.5 on a Gigabyte K8ns pro. Great stuff. victor
- vicvon
- Post #14
- Jul 27, 2004
- Forum: Computer Building
V
win2k pro on new A64 desktops?

As long as you use windows update and update to the latest SP you will have no problems at all.
- vicvon
- Post #4
- Jul 23, 2004
- Forum: Operating Systems
V
Gigabyte GA-K8NS Pro

Darn double post
- vicvon
- Post #224
- Jul 18, 2004
- Forum: Motherboards
V
Gigabyte GA-K8NS Pro

Hey rogelio, Try loosening your ram timings or drop the ram speed to 166 instead of 200 and see if that helps. Victor
- vicvon
- Post #223
- Jul 18, 2004
- Forum: Motherboards
V
Bad Video Card or MOBO?

Sounds like you may have installed the wrong AGP driver for the motherboard. Unfortunately, you will probably have to re-format and re-install windows to clear it up. It has an Intell chipset so make sure you do not accidentaly install Nvidia or Via agp drivers.
- vicvon
- Post #6
- Jul 11, 2004
- Forum: Computer Building
V
GA k8NS Pro

Any 4 or 8 x video card should work fine with this board. It is not 3.3 volt compatible, which means you cannot utilize an older 2 x AGP card. I would go for the 9600 pro, as it has excellent graphics capabilities (2D and 3D) so if you did decide to play a good game once in a while it would...
- vicvon
- Post #2
- Jul 4, 2004
- Forum: Motherboards
V
Gigabyte GA-K8NS Pro

Sorry double post
- vicvon
- Post #46
- Jun 14, 2004
- Forum: Motherboards
V
Gigabyte GA-K8NS Pro

Here are the drivers. There is even one for XP 64 that works fine. Make sure you put the entire driver on the floppy, as the directions state, or it will not work. Great board so far. I have had it for about 2hrs now and Win XP64 is running very fast on it...
- vicvon
- Post #45
- Jun 14, 2004
- Forum: Motherboards
V
Voodoo 3000 gets HOT!!!!

Not to mention the die process. The old voodoo cards use like a .28nm process. The new cards use .13. That in itself will allow the chip to run much cooler. You could actually run a 9800pro with no fan (not a good idea, but possible with good case cooling).
- vicvon
- Post #9
- May 23, 2004
- Forum: Computer Building
V
Cheap DVD burners?

The new Benq is dual layer capable with a firmware update. I would get that one just because it's more future proof than any other drive on the market at this time.
- vicvon
- Post #14
- Apr 1, 2004
- Forum: Computer Building

RESOURCES

Top Bottom