Gigabyte recently released BIOS version F20d and I'm curious if anyone is using it on an overclocked or undervolted system without any problems.
On all previous F20 releases my voltage and memory settings became completely unstable which could only be fixed by flashing back to F6c.
Both stock and undervolted. I just put a block on the GPU and since temps are so low and stable I'm wondering how much impact the CPU would have if I put it first in the loop. Is a 240mm radiator enough to maintain both around 40-45C?
If it matters, the pump is a Swiftch MCP35 and the fans are...
I'm curious if others have noticed any issues with tRFC while overclocking or optimizing memory timings on a Z490 board.
On Z390 and X570 boards, the same RAM had no trouble reaching 290 and lower tRFC, but on Z490 with the same clocks and subtimings, anything under 400 and the system won't...
Have you changed any BIOS settings not related to CPU and memory? I was just reading that enabling "Above 4g Decoding" can cause these wakeup issues. I forgot I had enabled it just for testing, and since disabling it haven't encountered the sleep problem.
Ebay just isn't worth the hassle anymore. I'd glady pay $50+ more for the same thing here or on Amazon. Plus, all the obvious scam listing drown out the few legitimate ones.
Looking for a 2080S on ebay sucks - every time I see a good price I get excited and jump in only to see a user with 0...
Some people like a little headroom in their PSU, not to mention lower temperatures from a PSU not constantly running at 90%+ of its maximum output.
Do the people who claim you definitely don't need a more powerful PSU think they use more electricity, or that it has to match the calculated...
Similar issue occasionally. Could be a handshake issue. DP or HDMI? HDCP enabled/disabled? What Windows power plan are you using? In my case it seems to do it more when I use High Performance as opposed to Balanced.
You also might try disabling USB Selective Suspend/Power Management for your...
Crucial MX300. I've had it for some time, but it's seen relatively little use. The only backups I stored on it are small configuration files, documents, etc.
For sure, I always make sure that's not checked.
Despite the horrible things I've read about the Jmicron chip used on this, the only...
I tried a few different recovery programs and neither could retrieve anything, even the 5+ hour deep search functions. I don't know if that means lots of bad clusters and the drive is on its way out or if the file system corruption just did a good job of screwing over my files.
Thanks for the...
I use a 2.5" SSD in an external USB enclosure for storing various backups, and twice now I have lost the contents because the file system became corrupted. Is this due solely to the fact that I sometimes unplugged the USB cable before fully ejecting it, or could something else be causing it? I'd...
Mostly subjective reasons regarding little quirks that seem to pop up at random requiring time spent tweaking and re-tweaking previously tweaked and stable settings. I'm old and lazy and don't have the patience or enthusiasm I used to for that. Plus the things I do will never use even the...
USB ports on routers are generally there so people can plug in a drive and stream pirated movies to their tablet. Most routers don't have the hardware or implementation to do real networking stuff via the USB input.
Just today I replaced a 3900x and X570 with a 10700 and Z490 board on the same Win10 install and haven't had a single issue, performance or otherwise. I didn't even uninstall the AMD chipset drivers beforehand. I know it's not optimal, but it won't ruin your day like in the past.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.