Hi just recently switched from crt monitor to lcd
I bought a xerox xa7-19i lcd; its connected through dvi to my geforce 6800 ultra tdh card and im using latest 81.98 drivers...
Not really a problem ut in specs it clearly states 1280*1024@75 hz i cant get those 75 hz only 60....whats up...
Hi
Question about setting SLI on A8N-sli deluxe:
SInce the new bios 1013 i have an option in bios for selecting single or dual cards.
Im planning on buying a second card and setting up sli and i was wondering how does this setting relate to the hardware switch-card on mobo?
Once i...
Thanks for the answer and links.
So as i can gather the trouble of getting a giga switch isnt really worth it...?
Is it really so that i cant get more than 125 mb/sec even on giga connection.
If it was even 200-300 mb/sec it would be great, but if the transfer isnt really that good than...
Hi
I have a following situation and need some help.
I have a router that is 10/100 and i have to machines connected to it. Everything is fine.
But i also have a asus a8nd sli deluxe which has two gigabit lan ports and on my other computer i have 1 10/100 mb card and 1 gb lan card...
I can now confirm that disabling ncq didnt help. My files seem to be beyond repair. everything that has any remote link to the local settings folder(like outlook) ends up with a bsod.
Any suggestions? I would be grateful since i dont have time or will for another install.
Thnx
Had 6.39 drivers installed since they went out.
Unfortunately i got little yellow triangle in tray tonight that some file was corrupted and that windows needs to do chkdsk.
I turned off NCQ. chkdsk is now saying the volume is clean...but i just hate this...
Ive just set up my computer as...
I installed it right on top of the old ones and it works fine...NCQ is on by default..which is a bit scary...but disk seems faster than before. I did a backup to my other computer over network...It shifted 6.5 gb in 20 min and i had no errors during that time...Anyone tried copying large files...
It seems that on new drivers ncq is turned on by default. But those drivers seem to be ok. I have no problems and everything is sooo much faster.
I dont get the audio driver stuff in the driver,but nevermind..If you have a8nsli-deluxe i wouldnt recommend installing the audio part it messed up...
I have a8n sli deluxe and i installed the new v6.39 nvidia drivers just last night right on top of the old ones that came with mobo...It seems now ncq is default turned ON. But everything is running in light speed...And perfect. Much better than original drivers.
Only confusion was when it...
Ive got this drive and 1003 bios...It works fine...NCQ is off...But i believe theres a bigger problem with nvidias drivers then there is with bios or the mobo or the drive.
Its in nvidia sata port 1.
THose two maxtors i was speaking about were tried in ports 1 and 2 then in 3 and 4 then in 1 and 3 it was always the same...eventually i moved it to silicon image controller where all was fine(except at the time it wasnt coz i had a bad memory module).
Then i...
I have the setup in question... Maxtor DiamondMax 10 250 gb /w 16mb and everything runs just fine....initially i had problems with nforce raid controllers with my 2 maxtor 80 gb (dm9) drives where the second drive was not seen...But at that time i also had a bad memory module in m ycomp and...
I bought Zalman 7700 ALCu... I thought my temps are going to change drastically after using stock cooler...I was wrong...
(I got abig chieftec tower)
Temps were not so drastically changed 32/34 with one 1200 mm sucking out...two 92 mm blowing in ....
But i found that a bit loud for my...
This 1003 final is making ht link @ 4 guess its for stability reasons...im a bit newbish with every new board so here is my question...
Did they do that for stablity reasons, and would it be ok to set it from auto to 5x...this way it seems to downgrade the gpu performance(get only ~6000 in...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.