I justed started to build my new system last night. Here's what I have
ASUS P5N-D
Q6600
OCZ SLI-Ready Dual Channel 4096MB PC6400 DDR2 800MHz Memory (2x2048MB)
WD 320Gb
2 EVGA 8800 GT's
Installed Vista 64bit. Clean install onto new HD.
I've been running into some problems.
1) HD Audio will not install. I've tried different REaltek installs and all fail. Everytime I reboot system windows says if found new hardware and tries to install HD Audio and fails.
2) Ran ASUS Probe. And get following message
There are some warnings
MB Temperature
The CPU temperature says 33c, and the MB says 47c. Is this right? Can the MB be higher than CPU? and by that much?
I've not put the outside of the case on yet either since I've got another HD I need to install once everything is stable.
Plus I can't understand the CPU-Z results
CPU keeps jumping from 9x multiplier to 6x multiplier
3) My memory is SLI-Ready but BIOS states SLI is disabled
CPU-Z shows
DRAM frequency at 400Mhz
FSB: 2:3
6-6-6-18
Any help is welcomed
I would have attached screen shots but IE keeps restarting when I try to insert an image into this posting. I'll try and put some on the web and attach links
Should I just go back to Vista 32bit. I had no problems with it on my A8N-SLI Premium
Thanks
Joe
ASUS P5N-D
Q6600
OCZ SLI-Ready Dual Channel 4096MB PC6400 DDR2 800MHz Memory (2x2048MB)
WD 320Gb
2 EVGA 8800 GT's
Installed Vista 64bit. Clean install onto new HD.
I've been running into some problems.
1) HD Audio will not install. I've tried different REaltek installs and all fail. Everytime I reboot system windows says if found new hardware and tries to install HD Audio and fails.
2) Ran ASUS Probe. And get following message
There are some warnings
MB Temperature
The CPU temperature says 33c, and the MB says 47c. Is this right? Can the MB be higher than CPU? and by that much?
I've not put the outside of the case on yet either since I've got another HD I need to install once everything is stable.
Plus I can't understand the CPU-Z results
CPU keeps jumping from 9x multiplier to 6x multiplier
3) My memory is SLI-Ready but BIOS states SLI is disabled
CPU-Z shows
DRAM frequency at 400Mhz
FSB: 2:3
6-6-6-18
Any help is welcomed
I would have attached screen shots but IE keeps restarting when I try to insert an image into this posting. I'll try and put some on the web and attach links
Should I just go back to Vista 32bit. I had no problems with it on my A8N-SLI Premium
Thanks
Joe