The problem is with a new optorite dd0201 dvdr burner- whenever i enable dma, it fails to read anything from the drive. Any disc put in will come up as ethier empty or as if there is nothing inserted. The drive works 100% perfect in PIO mode in this computer. When i put this in another computer it works fine in dma so it cant be the drive. But i know dma works because it works for everything else i throw at it.
Things i have tried:
Changing master/slave and ide bus and jumpers
Changing the cable, i even used the same cable from the computer where it worked.
Formatted/reinstalled- tried win2k and xp both do the same thing
Tried changing/updating the controller drivers to whatever i could get my hands on
Tried drivers for pretty much anything mobo/chipset related
Updated firmware for the burner-no difference
comp-
Dell 400sc
1024 ram 3.2 ht 9800 pro
the mobo is some dell version of the intel D875PBZ.
this is really really annoying me.
Things i have tried:
Changing master/slave and ide bus and jumpers
Changing the cable, i even used the same cable from the computer where it worked.
Formatted/reinstalled- tried win2k and xp both do the same thing
Tried changing/updating the controller drivers to whatever i could get my hands on
Tried drivers for pretty much anything mobo/chipset related
Updated firmware for the burner-no difference
comp-
Dell 400sc
1024 ram 3.2 ht 9800 pro
the mobo is some dell version of the intel D875PBZ.
this is really really annoying me.