Benchmarking in Q3...

[Brian07]

I've got my settings as follows

32 bit
Trilinear
everything on high detail
1024 X 768

I'm getting a very very steady 90 fps, not a single frame more. I disabled v sync in the advanced properties section on the display properties applet, is there a setting somewhere else that is bottlenecking my setup? I can change everything to the lowest settings at 600 x 800 and it still gives a steady 90 fps.
I'm running a
Duron 600 oc'ed to 950
Geforce 2 GTS 32mb
Abit KT7
128 Megs of PC133 clocked @ cas 2
adaptec 2940UW
seagate 9.1 Barracuda 7200 scsi

Any ideas?

 

[HalfHuman]

I think quake 3 has its own vsync setting, but I am not sure if and how to disable it.

btw...is 90 fps really that bad, I have a similar setup, and I am perfectly happy with it.

 

[Hellblast]

I did not think this would ever happen to me but I forgot how to benchmark in Quake 3! Ran so many benchmarks back then and now I just plain forgot how to do it... :-(
Can you give me the console commands pls?

Hellblast

 

[Neoplasia]

~
timedemo 1
demo demoxxx (ie 001, 002)

 

[MustangSVT]

goto quake3 directory and look for q3config file somewhere in there.

then look for this: seta com_maxfps "150"

set the number to what ever u want it to be.

have fun

 

[Dark4ng3l]

90fps is exacly twice as much as I get(give or take 5 fps) I sure dont complain about it. 90fps must be fine I dont see why you might want more. Seting the max fps realy high can make your pings bad on then net though.

 

[HappyGamer2]

http://www.nvnews.net/articles/benchmarking/benchmarking_page_1.shtml

http://www.3dpulpit.com/

 

[Brian07]

Thanks guys, I'm not really hungry for more frames, I'm just wanting to see what I would peak at. Thanks for the good info!

Brian

 

[RoboTECH]

Mustang: Q3 actually disables the com_maxfps command when timedemo 1 is active

it's a vsync setting in Q3 I bet. vsync isn't as easy to disable as one may think, heh...