- Dec 5, 2005
- 9
- 0
- 0
Ok, I've kinda posted this before, but I'm going to try again.
I have:
MSI 865PE Neo2-P mobo
2.8C Pentium 4
And DDR433
Now, even at 5:4 RAM ratio, the damn thing shuts down at 3.2Ghz, 230FSB, regardless of voltage, AGP/PCI locked, and cool temps with huge air cooling.
It'll run stable at 225, but my RAM is at 180. At 225 with 1:1 timings, CPU tests pass, but I get artifacts in games. I haven't tested, but I'm assuming this has to do with the RAM running over speed. So, as is, I figure my best settings would be to run 217 FSB with 1:1 timings. CPU @ 3023 and RAM at 434.
However, this ceiling is extremely low for the Northwood cores. My very last guess would be my PSU. It's a 480w Thermaltake Silent Purepower with 18A on the 12v rail. It's been running fine for about a year and a half, but from reading around it seems that 18A could be better.
My question, is it a high probabilty the PSU is the limit? Or is it more likely my proc is just capping out at 3.15. It's an M0 stepping, which I've seen people hit 3.7+ with.
Please answer before I pop 80 bucks on an Antec 550W TruePower.
I have:
MSI 865PE Neo2-P mobo
2.8C Pentium 4
And DDR433
Now, even at 5:4 RAM ratio, the damn thing shuts down at 3.2Ghz, 230FSB, regardless of voltage, AGP/PCI locked, and cool temps with huge air cooling.
It'll run stable at 225, but my RAM is at 180. At 225 with 1:1 timings, CPU tests pass, but I get artifacts in games. I haven't tested, but I'm assuming this has to do with the RAM running over speed. So, as is, I figure my best settings would be to run 217 FSB with 1:1 timings. CPU @ 3023 and RAM at 434.
However, this ceiling is extremely low for the Northwood cores. My very last guess would be my PSU. It's a 480w Thermaltake Silent Purepower with 18A on the 12v rail. It's been running fine for about a year and a half, but from reading around it seems that 18A could be better.
My question, is it a high probabilty the PSU is the limit? Or is it more likely my proc is just capping out at 3.15. It's an M0 stepping, which I've seen people hit 3.7+ with.
Please answer before I pop 80 bucks on an Antec 550W TruePower.