CPU temp, To high?

[jebatzel]

What kind of AMD XP cpu temps are you getting?

I am getting 55c and 130 F for my cpu in the bios.

CPU:AMD XP2000
Heatsink/fan: Thermaltake Volano 6cu+
Powersupply: Thermaltake Purepower 420W
Case fans:2 Thermaltake double ballbearing 80mm, 2 Antec 80mm fans, and one cheiftec fan.
Video Card: Abit Siluro OTES 64mb
Case: Blue Aluminum Cheiftec Matrix
Motherboard: Abit KR7A-133

I also can't get motherboard moniter to work with my computer, any other good programs for displaying the temps in windows? I am running XP pro.

Bat

 

[WaTaGuMp]

46c no higher no lower

 

[jebatzel]

what kind of CPU do you have?

Bat

 

[AtomicDude512]

Originally posted by: jebatzel
what kind of CPU do you have?

Bat

He just said XP 2000, maybe it is a Palomino...

 

[JaRb0y]

right now cpu at 41c motherboard 29c. always 12c degree higher then motherboard when idle. under load cpu temp becomes 15c higher then case. on a slightly overclocked 2000+ palomino with vcore at 1.79v according to MBM5

 

[WaTaGuMp]

I have a P4 2.0 at 2.3 wow you asked for AMD temps I am going blind sorry.

 

[jebatzel]

you aren't going blind

I edited my post to say AMD XP.

what kind of cooling are you guys using?

I just spent all this money on new case, new power supply, and all these case fans. The temps seemed to only drop like 10 degrees.


Bat

 

[WaTaGuMp]

I use a Vantec Aerflow with a Zalman fan mate to slow the 5600 rpm fan down.

 

[Corsairpro]

i have a palamino xp2000+ that I run at 58-63C everyday
on an abit nv7-m
alpha 6035 w/ a reg 60mm fan
2 92mm case fans (1 intake, 1 exhaust)
got a scsi drive and abit 4200 (not otes)

my case temp is usually 47-50C

I have too many cables so i have terrible airflow and its all in a mATX case.

 

[JaRb0y]

got a alpha pal 8045 with ys tech adjustable 80mm fan on cpu. 3 led fans - 2 out, 1 in. antec trupower 430

 

[m1ke101]

that temp seems very high for idle.....whats your room temp?

 

[dionx]

Asus A7N8X deluxe
Athlon XP 2000+ Palmino
Alpha 8045 w/ 80mm fan ~ 4000rpms
Arctic Silver 2
Chieftec Aluminum Dragon Case
2 Antec Blue LED 80mm case fans (intake)
2 Chieftec 80mm case fans (exhaust)
Antec SmartBlue350 powersupply
southern california environment

idle temps:
CPU: 34
mobo: 24

running prime95:
CPU: 40
mobo: 26

 

[Texun]

ASUS A7V266C
XP2400
SLK-800
3 - 80mm low RPM fans - HS, 1 front, 1 rear
47C idle - 49C full load

 

[deerslayer]

Epox 8k5a2+
XP 1600+ @ 2100+ (1743mhz)
SLK800a w/ 80mm YS Tech
Full Load:
CPU 39C
Case 26C

 

[drewxhawaii]

MSI K7N2G
XP2000+
ThermalRight SK7 w/ 80mm sunon @~5500
CPU: 55
Case: 38

i am doing all i can to try and get it lower

 

[BmXStuD]

use a program called "SpeedFan" Or "CPUIDLE" To montior temps.

 

[bergenvr6]

MSI KT3 ultra 2
XP2000+ Palomino
Thermalright SLK-800, AS3
Zalman 92mm fan @ 1500 rpm

CPU - Idle: 38 Load: 45
Case - Idle: 29 Load: 35

 

[cavemanmoron]

sisoft sandra,
epok 8kha+
amd xp 1700+ 147 fsb {PR2234}
52.5 c with the side cover on, running seti@ home
47-50c with cover off,
one 120mm fan at 7 volt in front bottom,
running Seti@home 24/7

 

[shelaby]

got an amd 1700+ @ 1920mhz at 35 celcius...got an ax-7 plus fan and side fan plus top blowhole

 

[jebatzel]

did the top blow hole come with the case or did you have to add that?

I was thinking about adding one to my case if it actually helped. I have a 120mm antec fan I can use.


Bat

 

[Cat13]

AX-7 with adj enermax fan
cpu ranges from 37c to 42c

 

[shelaby]

no i had to do it myself....but i got a kti from voyuermods...here the link here ya it works really well actually..cept my 120 mm fan is a bit noisy...just gotta get a diff one

 

[jebatzel]

steel or aluminum case?

"acrylic window kit" sound like it is meant for cutting a blow hole on the window.


Bat

 

[H34D0N]

mine runs in the 50-60s all the time no matter what i do i have 5 case fans and a top blowhole with a Thermaltake Volcano 7+ AMD Athlon Proc. Water cooling will be my next project though. I wouldnt worry about it most procs. have a 3 year exchange to begin with

 

[shelaby]

i have aluminum case, cut the hole with a jigsaw....its pretty easy except for installin the winodow...u need 2 sets of hands when doin that..its the most frustrating thing ive done...but once its done, its worht it.....there is alredy a blowhole laser cut into the window, so u just need to cut the case