DOS drivers for Linksys NIC

[Pres]

Greetings,

I need some DOS drivers for a Linksys PCMPC200 Cardbus NIC (for my laptop) and a Linksys LNE100TX NIC. I have looked at various driver related web sites and the Linksys site but no joy.

I want to back up my laptop over TCP/IP LAN with Ghost 2001 and I need to create specific boot disks for each computer so that DOS drivers are loaded and Ghost can do its thing.

Thanks in advance.

Pres

 

[Wizkid]

The DOS drivers are included in the driver file that you download from linksys. They are in the ndis/dos directory.

I have done this myself with the LNE100TX and it works fine...

 

[mikeinfwa]

wizkid,

Could you help me on the Ndis dos driver problem? The ndis/dos boot disk i create does not work
with ghost 2001. The tcp/ip selection is greyed out after i boot the computer with the peer to peer created boot disk

I have win98se on my home lan. ghost 2001. linksys 10/100TX version 4.0 and 4.1 NICs.
I use the ghost 2001 boot disk maker for the linksys cards. I find the ndis drivers ok on my hard drive. they are transfered to the boot disk. However, I don't know the correct parameters to list during the boot disk creation step.

Here's something i found but don't understand what it means.

>>>>II. After the Packet Driver is loaded, you can run the PC/TCP kernel
ETHDRV.EXE. the PC is then ready for PC/TCP communications.
To run PC/TCP applications, You need to load PC/TCP Kernel ("ETHDRV.EXE&quot.

a. Refer to PC/TCP manual, Command Reference section, Chapter 2.3.

b. The following example loads the PC/TCP Kernel and allocates 8 packet
buffers. Increasing the number of packet buffers (from the default of
5) prevents dropping of packets due to buffer shortage.

ETHDRV -p 8 <Enter> <<<<<<<<<<<<<<<<<<

mike

 

[Sukhoi]

Everything you need to make a bootable disk with network support should be in the following links:

http://www.wown.com/j_helmig/Dosclnt3.htm

http://www.wown.com/j_helmig/Dosclflp.htm

http://www.wown.com/j_helmig/Doscl3up.htm

 

[Sukhoi]

BTW, I use NetBEUI for file transfers on my LAN, and it works fine.