Tested with both sets of RAM runs fine @ 3.00GHz
The fault turned out to be the external HD (!!!) Its a Maxtor "always on" type where there is no on/off switch. It boots fine at stock but when i clock it I guess the external HDD causes problems. Everything works atm with +0.2 Ram volt and 1.4v vCore.
However, it is not detecting my other RAM (OCZ) and only reporting single channel. I am going to shutdown to check if I had seat it properly. Please don't tell me I fried the second stick
edit: checking out this RAM http://www.overclockers.co.uk/...701&catid=8&subcat=817
Tempted to get it over my 800MHz , also itching for that Q6600...god help me
The fault turned out to be the external HD (!!!) Its a Maxtor "always on" type where there is no on/off switch. It boots fine at stock but when i clock it I guess the external HDD causes problems. Everything works atm with +0.2 Ram volt and 1.4v vCore.
However, it is not detecting my other RAM (OCZ) and only reporting single channel. I am going to shutdown to check if I had seat it properly. Please don't tell me I fried the second stick
edit: checking out this RAM http://www.overclockers.co.uk/...701&catid=8&subcat=817
Tempted to get it over my 800MHz , also itching for that Q6600...god help me