kt7a-raid bios

[twp243]

Well it reset but noiw it will not find my hard drives
What is the right bios to flash this board. I have several differnt ones too chose from

Help!!!!!!!!!!!!!!!!!!!!!!!!!!

 

[dowxp]

dont know athlons, but all retail and offical bios's should work. apushardware.com usually has some. perhpas you had a bad flash.

 

[Losty]

try reflashing it...
i'm perfectly stable with my ww bios...he raid kt133a and kt133 and non raid use the same bios no?

yeah try reflashing to ww...if you want to reflash with your new bio...try downloading it again...might be corrupted...
yeah...

good luck

 

[zzzz]

After flashing a bios, you had to go to the cmos and reenable the HDD detection.(change it from none to auto for ide channels.) Only the master on ide 1 is enabled by default.

Also wz.b01 is the best for overclocking..

 

[Spiker]

It took me two or three time to get my abit kt7a-raid bios to notice my harddrives right, just keep setting HDD detection to auto and rebooting, if that doesn't work try manually defining your harddrives.

 

[twp243]

Well here is an update::
after going crazy with the drives and trying everything known to me. I had a last ditch Idea of changing the jumpers on the drives. you see It would not rec the drives as anything other than slaves no matter what I did so I tryied cable select and whoa!!!!! they worked
just thought I would share a verry frustrating 3 days LOL