I have narrowed my problem to the RAM or the DIMM slots.
I have:
AMD 64bit 3000+
Asus K8N with newest Beta BIOS
512MBx2 Kingston PC3200
Asus N6600 256MB Videocard
So this is slightly complicated. I installed both DIMMS in Slots 1,2. The computer locks up just after POST. Memory Test shows the 1024MB ram at 400mhz.
With the DIMMS in slots 1,3...The computer will boot but is extremely unstable. Memtest86 gets errors during the 1st test.
With the DIMMS in slots 2,3 the computer runs fairly well. Although the ram is at 333mhz.
Each DIMM will run fine by itself in all 3 slots.
Is there anything obvious that I might have missed in the BIOS? Everything is set to auto still.
I have:
AMD 64bit 3000+
Asus K8N with newest Beta BIOS
512MBx2 Kingston PC3200
Asus N6600 256MB Videocard
So this is slightly complicated. I installed both DIMMS in Slots 1,2. The computer locks up just after POST. Memory Test shows the 1024MB ram at 400mhz.
With the DIMMS in slots 1,3...The computer will boot but is extremely unstable. Memtest86 gets errors during the 1st test.
With the DIMMS in slots 2,3 the computer runs fairly well. Although the ram is at 333mhz.
Each DIMM will run fine by itself in all 3 slots.
Is there anything obvious that I might have missed in the BIOS? Everything is set to auto still.