Figured I would do a quick post about my recent purchase for those with cable run concerns in a P182. I dropped a Gigabyte-P35-DS3L mobo and a Corsair 520HX PSU into the Antec P182 case. No problems with cables and this mobo :thumbsup:. With the PSU installed normally (fan on top) I was able to route the 24-pin and 4 pin power cables around the back and into the motherboard connectors (if you want the PSU installed with the fan on the bottom, you might not have the cable length to do it around the back, but over the front should work although I did not try it that way). I have the MSI silent 8600GTS plugged in also, and do not anticipate any bizarre cable routing, although some of the molex connectors might not be perfectly routed, it should turn out ok. I'll post again once I finish the overall install after getting off of travel in mid-Sept if something is bizarre.