P4S333 settings

[Mindbreeze]

Hey guys,

Just installed my 1.6a and P4S333 and have it oc'd to 120 fsb at the moment. Is there a turbo 1 setting on this board? I have looked every where, but see nothing that says as such. I see a 1 T under a memory setting, but that is it. I want to be sure I am not overclocking my PCI/AGP. Also, I have an enermax case (Antec 1040 look alike) with a 330 w psu. It has a small 3 pronged connector comming out of the psu, I plugged that into the mobo's fanpwr connector, but when I turn my comp on, it gives a boot up error about the hardware monitor. So I go look and it says the fan is running at 1660 rpms and is shaded red. Is this a problem? Comments are appreciated.

Thanks much

My Rig
P4 1.6a@1920mhz
Asus P4S333
512mb PC2100 Corsair
Enermax FS-710 w/ 330W psu
GeForce 2 GTS 32mb

 

[Mindbreeze]

Anyone have any ideas regarding this?

 

[exp]

There is no Turbo 1 setting for the P4S333. It is #1 on my wishlist for future BIOS revisions but I'm not holding my breath. Just go straight to 133MHz FSB so you can be sure that your PCI/AGP cards are running in spec. Anything besides 100 or 133FSB will cause them to run at >33MHz.

About the fan thing, I had the same problem. Just unplug the 3-pin connector or set it to [Ignore] in BIOS.