- Feb 13, 2005
- 72
- 0
- 0
My parents Gateway PC died. Basically, when they hit the power switch, the PSU made a whining/squealing noise. I bought a 350w Antec Smartpower 2.0 to replace the bad PSU. After installing it, everything seemed to work fine, except when I was in the BIOS tweaking some stuff it froze. After trying to reboot I got 3 beeps from the motherboard, which meant bad RAM or RAM IC. I tried all the RAM individually and tried a stick I knew worked and still got the error codes. So I bought a new motherboard, an exact replacement of what was already there, (Intel D850EMV2 s478). I hooked everything up and now when turning the PC on the CPU fan, hard drives and disk drives spin up, but thats it. I get no output to the monitor, no beep codes, nothing. What's the most likely culprit?
Here's the basic specs-
Intel D850EMV2 mobo
Pentium 4 2.0 GHz Northwood
4x 128 MB PC800 RDRAM
GeForce Ti4200 128MB
Here's the basic specs-
Intel D850EMV2 mobo
Pentium 4 2.0 GHz Northwood
4x 128 MB PC800 RDRAM
GeForce Ti4200 128MB