Stumbled on this thread while searching for something similar, just have to say, there is no real need to do a pin mod for the E4300 on the ASRock 775i65G board - if you have the revision 2 board, you can change FSB manually (up to 300mhz) and adjust RAM frequency and timings. I have my E4300 running at 2.5GHz stable (wont go higher than 278fsb, but its because of the RAM) with 2 x 512 Patriot DDR400 sticks, the real drawback on this board is that you can't adjust DIMM voltage, so you can't really use any modules over 2.7v (unless you buy DDR500 @ 2.8v and clock it down to the 300fsb, which should theoritically bring it down to 2.7v).