POLL: Overclockable SCSI cards

[OD3]

I have been having a problem with the following system:

Mobo: MSI Pro2-A
CPU: Duron 650 @ 800 (8x mult)
CPU Cooler: Chrome ORB
RAM: 384MB Mushkin PC133
SCSI: Adaptec 2930U
CD-ROM: Toshiba
CD-RW: Yamaha 8824SZ (uses SCSI card)

I have overclocking this system using the multipler and getting 800MHz easy. If I go to 8.5x, the system won't even boot, just beeps over and over. I am guessing I need a better cooler. So I started to up the FSB and can get up to 106 fine. However, my SCSI CD-RW craps out at that point and will only burn at lower speeds. I had a Tekram DC-315U in there before and Yamaha & Tekram said that was the problem. I switched to Adaptec and I still cannot burn at 8x when I O/C via the FSB. Anyone seen anything like this before?

Anyone else have problems with their SCSI cards when overclocking? Any other SCSI cards work well in an overclocked system?

 

[bacillus]

I've fortunately had no problems with my adaptec scsi card with a pci bus speed of 40MHz!

 

[bacillus]

btw, where's the poll??:frown:

 

[esung]

I used to OC my DPT PM2144UW up to 41.5Mhz on PCI with no errors whatsoever.

 

[lilstevo]

tekram 395u at 43mhz no prob on my bp6 but at 44 it would get probs occsaionally with not recognizing the CDRW.

 

[Rhombuss]

I've gotten up to 37.5MHz PCI bus and my 2940U2W seems to have no problems with it.