Pro 2 & Intrusion Alarm?

[Neos]

Posted this in CPU/overclocking, but thought this would be the better place.
I finally got my 650 Duron to 850 on my MSI Pro 2. Voltage is 1.67 ..CPU temp is 33.
In the PC Alert III that MSI provides there is an Intrusion Alarm. I checked the box, and off she went, the alarm that is. Had to uncheck it, and restart the program before it would go away.
I can find little to nothing that tells me what this is. My temps look fine, and all is running well. Anyone have a clue?
Thanks,
Neos

 

[johnjk]

I think it's there to tell you if someone enters the chasis. I'm sure you would need additional hardware to make it functional though.

 

[LYRA]

I've got a similar problem, but it vent away when i installed PC-Alert III server. Now there is no problem at all, and the Intrusion field is disabled !
I think this function only works with MB, that incorporates an option i BIOS to enable/ disable this function (i.e. MS-6337 +?)

K7T Pro2
Duron 750@950
temp. = 39C idle/ 44C full load.
etc, etc....

 

[JimmyZ]

Guys,

You remember Key locks? Well, that's what the feature is for. Go to your local used computer store and pick up a key lock switch (about a buck or two)...make sure you get a key also! Plug it into the keylock slot on the MOBO. When the Key lock is in the lock posistion, the alarm stays off....the second you flip the key lock, the alarm goes off. It is supposed to be used inconjuction with a mechanical lock for your side panel. (IE turn the lock and you can open your panel) The reason it beeps now, is that the "key lock" header posistion is open...hence the alarm.

Just a heads up.

Jimmy