Super PI Contest

[Duvie]

You are not getting it...I dont care how far you are away from chinkgai as much as why one core got a much different time then the other core...usually they should be pretty close unless you didn't start them realtively close to one another, and even then I wouldn't buy that big of a diff...Look I only get like 2 sec difference between the cores...

 

[imported_michaelpatrick33]

Dnavarro, it sounds like a scheduling issue with your overclocked FX. One instance is getting a higher amount of the cpu time. For example, if I set one of my Superpi priorities higher than normal while leaving the other normal on my X2 even though I start them at the same time I get a larger disparity in the time it takes to complete each of them. By the way nice overclock! Enjoy the gaming goodness!

 

[dnavarro]

Duvie, I probably did start them 1 second off from eachother. I have made dual runs of 32m, 8m and 1m that have been spot on. It is possible I started them off, or one CPU had a larger load (I have other applications running) who knows. But it is only two seconds, so I didn't make a big deal about it (the 8m). If you are speaking of the 32m Dual run, I definiteyl started the second later. Probably 7 or 8 seconds later. I had no idea that was what you were speaking of. The 8m runs were at most 1 second apart (started). I just showed the 32m dual run for stability purposes.

D

 

[rise]

with no stability required amybe we should move this thread to xs

j/k, but kinda skewers the results if that isn't listed in the OP. also should have the cooling listed.

 

[eva2000]

eva2000: 4m 55s FX-57 San Diego @ 3120 Mhz / Ram 1024 Mb (DC) 240 Mhz 2-2-2-5 / SuperPi Mod 1.4

13X240HTT 2-2-2-5

Super Pi 8M = 4m 55.531s

Super Pi 32M = 23m 32.797s

 

[Technonut]

Originally posted by: eva2000
eva2000: 4m 55s FX-57 San Diego @ 3120 Mhz / Ram 1024 Mb (DC) 240 Mhz 2-2-2-5 / SuperPi Mod 1.4

13X240HTT 2-2-2-5

Super Pi 8M = 4m 55.531s

Super Pi 32M = 23m 32.797s

Nice eva2000.....

Looks like I need to bump it up a notch.... (Stability tested OC BTW... I just do not like the additional VCore needed for a small jump)


4 min 53 sec


EDIT: 1. Technonut: 4m 53s Pentium 4 640 @ 4453.4 Mhz / Ram 1024MB DDR2 (DC) 3-2-2-4 / SSE3 Patched Pi

 

[Shenkoa]

Is that the last of it?

 

[Technonut]

Shenkoa: If you have a minute, would you update my new time?.....


1. Technonut: 4m 53s Pentium 4 640 @ 4453.4 Mhz / Ram 1024MB DDR2 (DC) 3-2-2-4 / SSE3 Patched Pi

 

[BigCoolJesus]

Sorry, it take me a while to respond to this thread, been a little busy

6 mins 3 seconds


AMD Athlon 64 3500+ @ 2.7GHz (1.72Vcore)
Epox 9NPA+ SLI
2x1GB OCZ ValueSelect RAM @ stock timings (2T) and voltage


I used the SSE3 patched version

 

[Shenkoa]

Sorry it took me so long, I have not been paying much attention to this thread.

 

[BigCoolJesus]

no rush, dont really mind at all, just ran it for the fun of it

 

[werty316]

I am gonna have to get in on this action. I'll see what I can get tomorrow. Hopefully it will be good enough

 

[AkumaX]

Originally posted by: dnavarro
Guys, I would post the pics directly in this thread, but they are at 1920x1200. (I have been warnerd not to post large pics before). You should be able to download them from the link however, and view them up close.

System specs:

DFI NF4 Ultra D modded to SLI
Gskill 4400LE @ 300MHz 2-4-3-8 2.9V
X2 3800+ @ 3.0Ghz 1.6V Vapo LS cooled
Dual Raptors RAID 0
PCP&C 510 SLI Power Supply

Also, I am still tweaking this setup and I should have 3.1Gig stable at SuperPi 32m. I'll post my 8m results tonight hopefully

D

SSE3 8M SuperPi Dual run
SSE3 8M SuperPi

whao your cpu is HAWT

 

[werty316]

SSE3 6min 5sec

A64 3000+ Venice
MSI K8N Neo2 Plat
Patrtiot XBL 1GB kit (1:1, 2.5-3-3-7)

 

[BigCoolJesus]

Originally posted by: BigCoolJesus
Sorry, it take me a while to respond to this thread, been a little busy

6 mins 3 seconds


AMD Athlon 64 3500+ @ 2.7GHz (1.72Vcore)
Epox 9NPA+ SLI
2x1GB OCZ ValueSelect RAM @ stock timings (2T) and voltage


I used the SSE3 patched version

can i be added to the list?

 

[biff 24 2000]

SSE2 5:49
A64 3000+ Winchester @2.7GHz
DFI UT Nf4 Ultra-D
OCZ EL Platinum 2x512 @245MHz (2.5-4-4-8) Dual Channel
Super PI SSE 2 Patch

It that all i need?

 

[Shenkoa]

"SSE3 6min 5sec

A64 3000+ Venice
MSI K8N Neo2 Plat
Patrtiot XBL 1GB kit (1:1, 2.5-3-3-7)
"

I need more info.

CPU Type
CPU Speed
Memory Speed and rather its Single Channel or Dual Channel
Memory Ammount
Memory Timings
What version of PI

I dont want to post half missing info thats all

 

[Duvie]

Seems like you get as much P-D info I have gotten trying to get soime encoding benchmarks...I guess this must be proof no one is buying them around these parts.....

 

[Shenkoa]

UPDATED. Wow Jesus them memory settings are really holding your system back.

 

[Beef Taco]

I just did this for fun becase I had nothing better to do. I did have a screen shot, but when I tried to resize it, it got all distorted.

I got 9m 14.141 sec with my poor old Athlon XP 3200+ and my slow PC2700 memory at 2.5-3-3-7.

 

[Shenkoa]

Well????? Uhh??? I dont know where I could fit that. Maybe make an obsolete section ?

 

[Beef Taco]

Originally posted by: Shenkoa
Well????? Uhh??? I dont know where I could fit that. Maybe make an obsolete section ?

Lol, no, you don't need to do anything. Just thought I would share time I got.

 

[Shenkoa]

My new score.

5m 47s

Pic

 

[Shenkoa]

So I am guessing no one here owns a dual core P4???

I dont blame you!

 

[BigCoolJesus]

Originally posted by: Shenkoa
UPDATED. Wow Jesus them memory settings are really holding your system back.

Yea, this RAM wont overclock at all (the most i can get out of it is a FSB of 205MHz)

as of right now its running at 193MH (instead of 200), as thats the closest i can get to 200MHz while still keeping my CPU overclock stable


o well