Venice OCing thread!

[gnomepunk]

-=General Info=-
CPU Model Number: ADA3500DAA4BP
CPU Code: LBBLE ?????

-=System Info=-
Motherboard: DFI NF4 Ultra-D
BIOS Revision: 310
Memory: 2x512 OCZ PC4000 Gold VX (@250mhz 3.3V)
PSU: Antec NeoPower 480
Cooling Type, Brand, Model: Air, XP-90, Panaflo 90mm H1A

-=Stable OC Info=-
Max Stable OC: 2750 mhz
Prime95 SFFTs: 19:?? H:M
Prime95 LFFTs: N/A
HTT and Multiplier Used: 250 * 11
Actual VCore: 1.42V
CPU Temp in BIOS (Idle): ??
CPU Temp in OS (Idle):26C
CPU Temp Under Load: 34C
+12V Reading (Idle): 12.03V
+12V Reading (Load):12.03V

Current Stable. Burning in my memory alittle bit right now. My board seems to max out at 295 HTT and my chip maxed at around 2.9 (260 HTT 1.6v). I lose my 2-2-2-8 timing if/when I push my chip a little higher, but time will tell. I did this OC in about 3 hours the other night and haven't had time to really sit down and work on it. ~20 Hrs. Prime stable and 31 sec SuperPi 1M. I'm hoping to get my ram to 260 and run sync HTT.

 

[Avalon]

Originally posted by: user1234
It seems like Avalon has disappeared !!!! maybe the disappointment got him down, and he took the only way he knows out of the situation......RIP

Good one, dumbass.

:roll:

This thread fell off the front page, and I forgot about it.
There was no change at all as far as overclocking my chip. It'll prime stable all day long at 2.52ghz @ 1.425v, but requires 1.55v to prime at 2.61ghz. After that, it is no longer stable. Zalman shaved the idle temp down a degree, and the load temps down a couple degrees. Plus, it's quieter. I'm just going to leave my chip at 2.52 for now, which is more than what I purchased. I'm happy.

 

[gnomepunk]

http://valid.x86-secret.com/show_oc?id=20748

Stable at 2.8. A little more cpu and ddr voltage and everything seems fine. Prime will tell the tale.

-=General Info=-
CPU Model Number: ADA3500DAA4BP
CPU Code: LBBLE ?????

-=System Info=-
Motherboard: DFI NF4 Ultra-D
BIOS Revision: 310
Memory: 2x512 OCZ PC4000 Gold VX (@255mhz 3.5V)
PSU: Antec NeoPower 480
Cooling Type, Brand, Model: Air, XP-90, Panaflo 90mm H1A

-=Stable OC Info=-
Max Stable OC: 2805 mhz
Prime95 SFFTs: Priming Now
Prime95 LFFTs: N/A
HTT and Multiplier Used: 255 * 11
Actual VCore: 1.52V
CPU Temp in BIOS (Idle): ??
CPU Temp in OS (Idle):26C
CPU Temp Under Load: 39C
+12V Reading (Idle): 12.03V
+12V Reading (Load):12.03V

 

[Xchus]

Well my sig should say it all!

 

[spinejam]

ZipZoomFly Purchase on 06/18/05

A643000+ Venice @ 2700MHZ
LBBLE 0521 CPMW
300X9
DDR 2.5 3 3 8 1T @400MHZ
VCore 1.6
VDimm 2.8
Chaintech VNF4 Ultra w/ 03/15/05 Bios

 

[ender11122]

=General Info=-
CPU Model Number: ?? AMD 3000+ Venice core
CPU Code: LBBLE 0520

-=System Info=-
Motherboard: DFI NF4 Ultra-D
BIOS Revision:
Memory: 2x256 Corsair XMS CAS2
PSU: XCLIO 450w
Cooling Type, Brand, Model: STOCK

Currently Priming at 2.75ghz

 

[khurios2000]

Originally posted by: user1234
please more results less blabber

bought on 7/5/2005, Newegg, shipped from NJ warehouse,
0517BPEW,

will post ocing later

 

[Jordantm13]

I've got my 3500+ Venice up to 2588 with 1.5v and stock cooling.

 

[screw3d]

Did I just get a good stepping without even trying?

ADA3000DAA4BP
LBBLE 0517 APAW

/rubs hands

 

[coomar]

General Info=-
ADA3000DAA4BP
LBBLE 0519

-=System Info=-
Motherboard: DFI NF4 Ultra-D
BIOS Revision: 704-2
Memory: 2x512 Mushkin Blue Line C2 (BH5 UTT) 2-2-2-6@200mhz 3.1V
PSU: Enermax 485W Noisetaker
Cooling Type: Stock but I've been offered a CNPS7700-AlCu or XP-90 in a trade

-=Stable OC Info=-
Max Stable OC: 2600 mhz
Prime95 SFFTs: 13:?? H:M
Prime95 LFFTs: 12:?? crashed some point in the niught
HTT and Multiplier Used: 289 * 9
Actual VCore: 1.485V
CPU Temp in BIOS (Idle): ??
CPU Temp in OS (Idle):36C
CPU Temp Under Load: 50C
+12V Reading (Idle): 12.22V (multimeter)
+12V Reading (Load):12.20V (multimeter)

The cpu can go higher 2.65-2.7 at 1.55 volts

 

[NoPantsMC]

I'm new to overclocking and have some questions. But first, here are the specs for my system:

3200+
ADA3200DAA4BP
LBBLE 0518DPAW
Z646086E51933
2.6Ghz - 10x260
vcore - 1.525v
temp under load: ~50 degrees celsius
cooling - Zalman 7700Cu
OCZ VX @ DDR 520, 2-2-2-8
DRAM voltage - 3.6
DFI Lanparty Ultra-D

This seems to be a stable overclock. I can do Super PI 32M in 28m 24.344s. I've tried doing some tests with Prime95 too. I only let it run for 30-45 minutes, but there were no errors. I've also played Battlefield 2 for awhile and there were no problems.
I'm hoping to get a better OC than 2.6Ghz, but I'm unsure about increasing the vcore any more. I understand that setting the vcore too high will negatively affect the processors ability to be overclocked and might ruin it completely. What is a safe limit?
Also, I heard that increasing the chipset's voltage makes for a better overclock. Is this true?
I'd also like to hear any other tips you might have to get better performance out of my system.
Thanks for your help