Wiring Help Needed

[SpedeRacer]

Hey guys I am currently building a computer for the first time and need some help connecting the front panel USB, Firewire, and Audio cables to the mobo. Basically, I don't know where anything goes...here are some labeled pictures:

USB:
The USB Wire
USB Section in Manual

1394:
The 1394 Wire
1394 Section in Manual

Front Panel Audio:
The FP Audio Wire
FP Audio Section in Manual


Front Panel Picture
I realize this is very tedious...well it is to me so thanks for your help in advance.

 

[imported_Darthan]

Ok, the 1394 one is straightforward enough, just a bit annoying. Vp goes to the 12V labeled pins, VG goes to any ground pin, as does the GROUND pin. TPA* and TPB* ought to be the same as TPA+ and TPB+ so try that. You won't hurt a firewire device plugging in the signal wires backwards so don't worry about it (I know, I've done it because the original Antec Sonata case had mislabeled wires). If the device doesn't work just switch the TPA and TPB plus and minus and see if it works. If that doesn't do it, then you're on your own with it.

For USB compare the color of the wires on the case's USB cable to the color of the wires in the USB connectors that came with your mobo. If they are organized the same way just plug and go because these colors are standardized. If they aren't call up your case manufacturer and ask them what each wire is or go on their forums or tech support webpages and look around.

For the audio call up Asus tech support and get them to talk you through it.

It is also possible that if you read the manual for the case and mobo you will find things explained so that you can figure this out.