Pass Your Cisco 640-816 Exam Easy!

Get 100% Real Exam Questions, Accurate & Verified Answers By IT Experts

Fast Updates & Instant Download!

Certification Exam: 640-816 (Interconnecting Cisco Networking Devices Part 2)

Download Free 640-816 Exam Questions

Exam 640-816 - Interconnecting Cisco Networking Devices Part 2
Size: 8.75 MB
Posted Date: Sunday, February 26, 2012
# of downloads: 4
Free Download: This file is outdated. Browse other 640-816 VCE Files
Exam
640-816 - Interconnecting Cisco Networking Devices Part 2
Size
8.75 MB
Posted Date
Sunday, February 26, 2012
# of downloads
4
Free Download
This file is outdated. Browse other 640-816 VCE Files
Comments
* The most recent comment are at the top
  • brh1
  • United States
  • Jul 03, 2013

@Loulou, regarding the no login question's answer being D, this is the only option, as you will allowed to log in without being challenged with a password.

  • Jul 03, 2013
  • Sonia
  • United Kingdom
  • Feb 04, 2013

I am not sure of the question number however the correct answer for question as below:

A new switch is being added to the River Campus LAN. You will work to complete this process by first configuring the building_210 switch with an IP address and default gateway. For the switch host address, you should use the last available IP address on the management subnet. In addition, the switch needs to be configured to be in the same VTP domain as the building_100 switch and also needs to be configured as a VTP client. Assume that the IP configuration and VTP configuration on building_100 are complete and correct.

The configuration of the router is not accessible for this exercise. You must accomplish the following tasks:

Determine and configure the IP host address of the new switch.
Determine and configure the default gateway of the new switch.
Determine and configure the correct VTP domain name for the new switch.
Configure the new switch as a VTP client.

Answer:
As the switches are connected. do the folllowing:
1. go to switch of building_100 console and type show running confi commnd. the output of this command will show you the ip adress of the vlan1 and ip address of the default gateway.
2. i think the mamagement domain in this question refer to the vlan1 (the default vlan) so take the subnet of this ip address and find the last available ip address in that subnet.
3. assign it to vlan1 in switch_210 and add the same default gateway as switch_100.
4. Type command show vtp status in switch_100 and find its domain. go to switch_210 and type vtp domain domain_name command.

This completes the configuration.

  • Feb 04, 2013
  • Rizwan
  • United Kingdom
  • Jul 24, 2012

Passed exam yesterday !

This exam collections is great .Thanks to CBTNUGGETS and 9tut. All questions were from this dump except 3 questions that I had not seen before - OSPF Simulation and Frame Relay Simulation, they were pretty straightforward as long as you understand the concepts. Also had Vtp sim but dont just rely on this dump as there is still some subnetting related drag & drop Qs, where IP's are changed.

I used this dump, 9tut and CBT nuggets. Goodluck to those still preparing. Learn sims in 9tut, and build your own labs if possible .highly recommended, and understand the concepts by Jeremy in CBT !

  • Jul 24, 2012
  • osule
  • Canada
  • Jul 09, 2012

Passed today with 958, thanks everybody for all the comments on this site and 9tut. All questions were from this dump except 2 questions that I had not seen before in OSPF and Access list, they were pretty easy so dont worry. Had Vtp and Frame Relay sims. Comments from everybody gave me confidence before the exam. I used this dump, 9tut and CBT nuggets. Goodluck to those still preparing. Learn sims in 9tut, and build your own labs if possible.

  • Jul 09, 2012
  • Examcram
  • United Kingdom
  • Jul 05, 2012

Can anyone confirm, sims VTP lab and frame relay for exam 816 in the UK?

Any other sims in 816 or just 2 main ones?

  • Jul 05, 2012
  • gh
  • United States
  • Jun 29, 2012

Questions are still valid. Took the exam today and passed. 90% of the questions were from this dump.

  • Jun 29, 2012
  • NIGGER
  • United States
  • Jun 24, 2012

Passed today. Dump is very valid on the East Coast of the USA.
Thank you for such a accurate quality dump!

8 or 9 questions do not show up in the dump. assuming they are new. Also watch out for those simlets, study those HARD in the dump, and KNOW YOUR SUBNETTING. Create a subnet chart and dump it on scratch paper or a dry erase board and you will be fine.

  • Jun 24, 2012
  • itdude
  • United States
  • Jun 23, 2012

Passed this morning. Almost ALL QUESTIONS were from this exam, however, the answers were all in different orders. Also, I studied using CBT Nuggets, 9 TUT, This Test, The Cisco Is Easy website and used Packet Tracer (I recreated all of the Sims and 9Tut questions just because I wanted to make sure that I passed this time). Knowing VTP and subnetting were also keys to success.. It wasn't easy to get to the point that questions were not that hard. Understand the concepts and the test will just fall into place.

  • Jun 23, 2012
  • itguy
  • Canada
  • Jun 20, 2012

sorry to say but studying for months doesn't mean that you will pass. you need to understand the concepts and you must be able to trouble shoot and be able to read the outcomes of different routing protocols. i had to study for two months before i took the exam. i thought i was well prepared but only managed to finish it in the allotted time. i did use the practice tests but only for practice not for memorizing. i would suggest every one to use cbt nuggets and alot of practice on 9tut plus dumps and you will pass.

  • Jun 20, 2012
  • IFAILED
  • United States
  • Jun 16, 2012

I've been studying for months and failed this exam. The second to last question was the VTP SIM from 9tut.. I only had 10 min left. They decided to throw it in then.. How2pass accepts the show run command but BEWARE this command does not work on the test.

You MUST run the show running-config which is what I must have done wrong. You must run this command to find out the management vlan subnet on SW2 in order to assign it the first available address in the subnet. My score 790/1000. Test is VERY hard.

Still had some questions from the dump but noticed different syntax which made it confusing. Rewording. So be careful! I scored a 53% on the Configure verify and troubleshoot a switch with VLANS and interswitch communication section..

Can somebody plz let me know if it's because I failed the VTP sum!?!? I assigned the wrong IP ADDRESS then the one it wanted..Also may have assigned the wrong default gateway because I used the show cdp neighbor Detail on SW2 which is way wrong..

Also know FRAME RELAY GOOD and a lot of NAT/PAT questions I would say had about 7 out of the 42 questions. Time FLYS by. So user BEWARE. Also know the drag and drop HOLDDOWN TIMER/COUNTDOWN TO INFINITY/ROUTE POISEN/ POISEN REVERSE/ and even a new drag and drop term I've never seen. MAX AGE TIMER!? or something to that effect.

NOT HAPPY. Have to reschedule. Can somebody plz elaborate if maybe I would have successfully completed the VTP LAB that I would have maybe passed!?!? I thought I actually did really well until the infamous "WERE SORRY TO INFORM YOU"..FAIL>...!>>!?!?!

  • Jun 16, 2012
  • mikemonk
  • United States
  • Jun 14, 2012

Passed today with 958. Dump is still valid. Thanks!

  • Jun 14, 2012
  • SurfingPR
  • Puerto Rico
  • Jun 12, 2012

Plachon thksssssssssssssss i will go

  • Jun 12, 2012
  • Plachon
  • Poland
  • Jun 12, 2012

Passed ICND2 today with 986/1000 :)
this dump 100% valid + 9tut.com frame-relay sim

  • Jun 12, 2012
  • DNY
  • United States
  • Jun 11, 2012

Know the material.. The ICND2 testing content has not changed. These test practice questions are great for getting ready. If you just memorize what STP or VTP is an acronym for and not what its does, you'll never pass. Also, if you can't subnet in your head, you'll never pass. Know each and every subject matter content as if it were the back of your hand. Think about it, what job are you going to keep if you're adding a CCNA credential to your resume but can't even login to a router / switch.

  • Jun 11, 2012
  • Greg
  • Sweden
  • Jun 11, 2012

like everyone else has reported. no longer valid. I did not pass :(((((((

  • Jun 11, 2012
  • Wondering2
  • Switzerland
  • Jun 11, 2012

Anyone from the US or UK take this test this morning? Can you confirm if still valid, both the multiple choice questions and the SIMS? What percentage of new stuff? When and where did you take it, and did you pass?

  • Jun 11, 2012
  • techguy
  • Canada
  • Jun 11, 2012

this is the problem guys. i say it to all the guys please spend time when you are taking the certification test. when people start doing it in less than 30 minutes they normally change the question pool altogether. also don't just memorize it try to understand the material.

  • Jun 11, 2012
  • Oh yes
  • United States
  • Jun 11, 2012

@crendelek Thanks for the update. I have ICND2 tomorrow and I'm scared .. it seems like the UK guys and some other US guys are reporting that test have changed since after the 9th (you took on 8th lucky you!).. I can't reschedule the test since it is within the 24 hour period. This is going to be bad.

  • Jun 11, 2012
  • crendelek
  • United States
  • Jun 11, 2012

I did my test 08 Jul 2012 in Arizona.
Everything is valid, but different names an d IP.

  • Jun 11, 2012
  • hey you
  • United States
  • Jun 11, 2012

@crendelek, are you sure the sims are all still valid? Exactly like those on 9tut? Cause I heard they just recently changed them around. What day did you take the exam? You are US testing center? It seems the dudes in UK already got screwed over.. but a guy in Philippines reported still 100 valid.. what is going on? Cisco doing a slow rollover of the new questions or something?

  • Jun 11, 2012
  • arst
  • United States
  • Jun 11, 2012

I'm taking my test tomorrow. I know the content well but I'd appreciate if someone could confirm/deny what MPLS said.

  • Jun 11, 2012
  • MPLS
  • United States
  • Jun 09, 2012

Failed today this morning. All the questions have been changed. Cisco must have swapped with new pool!!! Anyone else in the US please confirm!

  • Jun 09, 2012
  • crendelek
  • United States
  • Jun 09, 2012

Passed it today with 986 and 35-36 minutes.
Almost same questions like here, but 2-3 are new.
The SIM is same, but different IP and Names. It is better to study SIM from 9tut, they are without mistakes and with explanation, not like here 8=(
I had 43 questions, 75 minutes, 2-3 drops, VTP SIM, Frame-Relay SIM.
Good luck!

  • Jun 09, 2012
  • dj
  • United States
  • Jun 08, 2012

I pass icnd2, my score is 860. Thanks for the help.

  • Jun 08, 2012
  • crendelek
  • United States
  • Jun 01, 2012

there is a question i see on a dump that i need a explanation to.
..A host with 192.168.125.34/27 needs to be denied access to all hosts outside its own subnet.
Why
access-list 100 deny ip 255.255.255.255 0.0.0.0 any
not
access-list 100 deny ip 192.168.125.34 0.0.0.0 any
?

  • Jun 01, 2012
  • stay
  • South Africa
  • May 31, 2012

how long must you wait after passing icnd1, in order to take the icnd2 exam, which is the better option- is it better to do icnd1 & icnd2 or to do the ccna???

  • May 31, 2012
  • it lady zim
  • Zimbabwe
  • May 27, 2012

hi guys hw do i download the dump cos after finishing downloading its nt opening its saying unknown question type n m using vce engine

  • May 27, 2012
  • BigD5X
  • United States
  • May 24, 2012

Oh, I forgot about another surprise I was hit with, The test went up in price $25 in January. Now instead of paying $125, the price is $150.

  • May 24, 2012
  • Rico
  • United Kingdom
  • May 24, 2012

to BigD5X :

Thanks mate, great to help us..

  • May 24, 2012
  • loulou
  • United Kingdom
  • May 24, 2012

Ok my vault

"No login" means there is no check password

but i still dont get the answer

  • May 24, 2012
  • Loulou
  • United Kingdom
  • May 24, 2012

There is an error on this dump, imo

Q: What is the result of setting the no login command?

A: there is a virtually limitless supply of ip addresses

Dafuq ???

For me, the answer is :
Both and SSH access requiere a pwd

  • May 24, 2012
  • BigD5X
  • United States
  • May 24, 2012

By the way, I had 43 questions and 75 mins.

  • May 24, 2012
  • BigD5X
  • United States
  • May 24, 2012

Hello everybody, I pass ICND2 today with a 874. This vce is 100% valid.
All multiple choice question was on point. However my score was low because I got hit with a few surprises. 4 drag & drops, One, I never seen before, Two, Exam G question 15, all IPs were different. 3, Exam G, question 22 the same, Exam H question 20 was the same. The same VTP ICND2 lab sim everybody else got. Different ip's of course and to use the last available ip address. The CCNA Hotspot Frame Relay sim, same concept but all the IP addresses & multiple choice questions were different. I got this question wrong. And last but not least, OSPF sim, again, same concept, different ip addresses & choices. I got this wrong as well. My advice, study the concept of both inside and out and you will do fine.

  • May 24, 2012
  • Rico
  • United Kingdom
  • May 22, 2012

I'm planning to get my test on 01/06/2012.
which drag and drop is the most commom to appear on exams?

Thanks
Rico

  • May 22, 2012
  • IT Lady from Zambia
  • Botswana
  • May 22, 2012

hello Mike this is IT lady from Zambia tho the system sees me as from Botswana. the frame relay is from the 802 dumps check colissio and jerico dumps u will find it there.

all the best

  • May 22, 2012
  • it lady
  • United States
  • May 20, 2012

I used Dennis vce, but i think both are the same. Dennis is valid 100%.

  • May 20, 2012
  • dj
  • United States
  • May 20, 2012

To it lady, did you use this vce or the new one by dennis to pass the exam?

  • May 20, 2012
  • IT Lady
  • United States
  • May 19, 2012

Yes, only the first five questions. Same questions and answers.

  • May 19, 2012
  • Mike
  • United States
  • May 18, 2012

Was the OSPF sim the exact same as the website as far as the IP and wildcard masks?

  • May 18, 2012
  • IT Lady
  • United States
  • May 18, 2012

I had 43 questions, two drag and drops, two labs, VTP and hotspot Frame relay.I forgot to mention OSPF,go here.. http://www.9tut.net/icnd2/ospf-questions. This was part of the exam.

  • May 18, 2012
  • IT Lady
  • United States
  • May 18, 2012

http://www.9tut.com/ccna-hotspot-questions, Hotspot Frame-relay Question,scroll down to the bottom.
http://www.9tut.net/icnd2/icnd2-labsim/vtp-configuration-sim#more-129.VTP Configuration Sim.

  • May 18, 2012
  • Mike
  • United States
  • May 18, 2012

IT Lady, congrats! What frame relay question was it? I can't find a frame relay question on the 9tut website. Also, how many drag and drop questions did you get? I am taking mine tomorrow. Thanks!

  • May 18, 2012
  • IT Lady from Zambia
  • Botswana
  • May 18, 2012

im back with a gud report. passed on 16th May with 972/1000 score. the dump is 100% valid got a lot of questions from here. had VTP, OSPF,Frame relay and guess what? my exam was 105minutes.

used this dump, 9tut, collisio and jerico for my study. all the best to all those preparing your exam

  • May 18, 2012
  • Marwan
  • United States
  • May 16, 2012

By the way, I passed with 930/1000...43 Questions 75 Minutes

  • May 16, 2012
  • Marwan
  • United States
  • May 16, 2012

This download is Valid Valid Valid....make sure you study the CCNA Hot spot frame-relay Question at 9tut.com, it was on the Exam but not on this download. The simulate was from Exam H Qestion # 22 Configuring VTP. Locate the question by using the designer program not the Manager.

  • May 16, 2012
  • AAA+
  • Thailand
  • May 15, 2012

Pass today 972/1000 Dump is still 100%

  • May 15, 2012
  • Andrew
  • United States
  • May 14, 2012

Oh and the test can range from 40-50 questions and you will get either 75 or 95 minutes depending on the amount of questions you got and how many simulations they gave you.

  • May 14, 2012
  • Andrew
  • United States
  • May 14, 2012

I took the test May 3rd and passed with a 874. This dump was perfect and there were only 1 or 2 questions on the test I didnt see here. I got lucky and only got 43 questions and only 1 simulation which was the VTP sim on 9tut. I had 75 minutes to complete the test and finished in about 25 minutes because most of the questions I recognized from this dump. My suggestion is to study this dump and practice the Access List, EIGRP, VTP, and NAT sims from 9tut and you will have no problem passing. The Access List 2 sim and EIGRP sim can be found at 9tut.com and the VTP and NAT sims can be found at 9tut.net. Download them to packet tracer and practice them until you have the commands down pat.

  • May 14, 2012
  • IT Lady from Zambia
  • Botswana
  • May 14, 2012

just booked for a retake got 804/1000 in march, it was before i knew about this dump. have discovered that a lot of questions that were in my test were from this dump. i m confident of passing this time....will report back though lol!
@Dwayne Salmon what simulations where in your exam?
@Khalidspace exam is 43 to 45 questions, time is 95minutes and passing score is 825/1000. all the best

  • May 14, 2012
  • Wannapass
  • United States
  • May 13, 2012

Can someone clarify im taking exam next week,exactly which sims are on the test because on 9tut there are two vtp sims. I guess my question is if im taking icnd2 are the sims diffrent for ccna composite and if so please exsplain because all labs thus far i been studying besides hotspot is in icnd2 section and this was valid for icnd2

  • May 13, 2012
  • Dwayne Salmon
  • United States
  • May 12, 2012

Passed Today 902/1000 this dump is valid

  • May 12, 2012
  • khalidspace
  • Egypt
  • May 12, 2012

can anyone tell me how many questions are in the exam?how long is it?and what is the passing score?

  • May 12, 2012
  • AAA+
  • Thailand
  • May 12, 2012

answer C because packet destined 192.0.2.156 not match routing table
Therefore, it is sent "gateway of last resort is 192.168.4.1 to network 0.0.0.0 "
and subnet 192.168.4.0 it match "C 192.168.4.0/24 is D. Conn, S2" in routing table therefore = packet has been sent interface Serial 2

  • May 12, 2012
  • Gee
  • United States
  • May 11, 2012

theres a question i see on a dump that i need a explaination to..

Question: How will a router handle a packet destined to 192.0.2.156?

a: the router will drop it
b: router will return packet to source
c: forward out S2
d: Fwd: out either S0 or S1

output:
#Show ip route
gateway of last resort is 192.168.4.1 to network 0.0.0.0

10.0.0.0/24 is subnetted, 3 subnets
C 10.0.2.0 is directly connected, E1
D 10.0.3.0[90/2195456] via 192.168.1.2, S0
D 10.0.4.0[90/2195456] via 192.168.3.1, S1
C 192.168.1.0/24 is D. connected, S0
D 192.168.2.0/24[90/2195456] via 192.168.1.2, S0
[90/2195456] via 192.168.3.1, S1
C 192.168.3.0/24 is D. Conn, S1
C 192.168.4.0/24 is D. Conn, S2

The answer is C, Why not D?

  • May 11, 2012
  • bhy2
  • United States
  • May 11, 2012

9tut.com and 9tut.net have the sims.

  • May 11, 2012
  • dj
  • United States
  • May 11, 2012

where can I get the simulator lab questions? is it from this simulator or from 9tut?

  • May 11, 2012
  • Gary
  • United States
  • May 10, 2012

Can someone explain to me Q. 23/25 Exam B.

Host pings router, What is the TTY value for that ping?

Ive read my whole CCNA workbook and do not remember learning anything of the sorts.

  • May 10, 2012
  • Dwayne
  • United States
  • May 10, 2012

Could some explain Exam G question 4 about routing has been configured on the local router with these commands.

  • May 10, 2012
  • Khasar
  • Mongolia
  • May 10, 2012

Passed with 944 :) got lab for VTP and frame relay (CCNA hotspot 9tut) most of questions was from this dump. Good LUCK guys

  • May 10, 2012
  • Zidane888
  • United States
  • May 09, 2012

Questions are totally legit passed exam yesterday 930/1000

  • May 09, 2012
  • dj
  • United States
  • May 08, 2012

Are the simulator questions that appears on the exam on the 9tut website or on this dump?

  • May 08, 2012
  • dj
  • United States
  • May 08, 2012

For those people who took the exam, what others dumps did you use beside this in exam collection.

  • May 08, 2012
  • Rhandy Figueroa
  • United States
  • May 07, 2012

Took ICND2 on 5/2.passed with a 958. Dump was very accurate. Also used CBT Nuggets. Good luck!!!

  • May 07, 2012
  • Kyle
  • United States
  • May 07, 2012

dump is legit & 100% valid. passed with 974. be sure to visit 9tut.net also for labs

  • May 07, 2012
  • Ash
  • India
  • May 06, 2012

this dump is still valid..passed with 920 score..thanks to te uploader..

  • May 06, 2012
  • Rene (moderator)
  • Netherlands
  • May 06, 2012

@Jbag

Under "line vty" if there is a "no login", then no authentication is attempted and the connection automatically succeeds. (This is very insecure)

So, answer A, B, and C are incorrect, and answer D (however unlikely) is correct.

  • May 06, 2012
  • Jbag
  • United Kingdom
  • May 06, 2012

Can someone either correct me or confirm that this question is wrong:

What is the result of setting the no login command?
(Exhibit shows user putting the no login command on line VTY 0 4).

A. Both SSH and Telnet access is denied
B. Both SSH and Telnet access requires a password
C. Both SSH and Telnet access requires a new password at first login
D. There is a virtually limitless supply of IP addresses

I would have thought it was A but somehow the answer is D

  • May 06, 2012
  • BostonDude
  • United States
  • May 04, 2012

This dump is definitely valid. about 20 questions from here

  • May 04, 2012
  • john
  • United States
  • May 04, 2012

Passed with a 930. valid dump
9tut and this dump was enough! Thanks! :-)

  • May 04, 2012
  • Jeff
  • United States
  • May 03, 2012

Passed with a 916. Still valid

  • May 03, 2012
  • Shyam
  • India
  • May 02, 2012

Doug, I just verified. "show users" command shows who's telnetted into your device while "show sessions" essentially shows which devices are you telnetted into.

So I'm guessing this question tries to mean "which command shows the devices you are telnetted into".

Thanks for taking out time Doug. Appreciate it.

  • May 02, 2012
  • doug
  • United States
  • May 02, 2012

Shyam, Show Sessions is correct. You are looking the open sessions connect to the router, not the users. At least show sessions is the command that I have used in the real world to show the number of users that were logged into a router that I was working on. Hope that helped.

  • May 02, 2012
  • Shyam
  • India
  • May 02, 2012

Could someone clarify this question?

Q: Which command shows your active Telnet connections?
Ans: show session

I feel the answer is "show users". Somebody please clarify.

Thanks.

  • May 02, 2012
  • Doug
  • United States
  • May 01, 2012

Paddy, check out "GNS3 WorkBench 5.6" all of the sims are from 9TUT.

  • May 01, 2012
  • Doug
  • United States
  • May 01, 2012

Anyone have a copy of Cisco IOS c3725-adventerprisek9-mz.124-15.t10.bin? I need it for studying for my CCNP. Please e-mail to hechtd@sbcglobal.net

  • May 01, 2012
  • sideffect
  • Turkey
  • May 01, 2012

Hi there.

I passed yesterday icnd2. I can say, this dump is still valid. But:

-Not all of questions are same,
-Some sims were different,
-Choices not in exact same line. You need to remember.

About sims,

You need to learn and study to switches. vtp, ip def.gateway, etc. Not very hard.

And you need to learn subnetting very vell. Lots of ACL and IP subnetting questions.

  • May 01, 2012
  • paddy
  • Ireland
  • Apr 30, 2012

Hi
Could any body give me an idea of the sims which are being used now, was thinking of buying the howtopass sims but its more money throwing at this.

Any advice is much appreciated.

  • Apr 30, 2012
  • Bryan B
  • United States
  • Apr 30, 2012

Passed today with 916/1000. Didn't see hardly any questions that weren't on this dump. IPv6, NAT, OSPF and VTP heavy.

  • Apr 30, 2012
  • Andre
  • Ireland
  • Apr 30, 2012

Passed this exam 846/1000 Today.Qts in my exam VTP Configuration Sim,Hotspot Frame-relay Question (from CCNA section),OSPF,Subnetting,IPv6,ACL. I did not have the time to go through all the questions or through all the videos from CBT nuggets ICND2, but it was enough to pass. I believe would score higher if had the time to go through everything. Thanks for your posts.

  • Apr 30, 2012
  • jibz
  • United Kingdom
  • Apr 26, 2012

i know it nw.itz the EXHIBIT tab to the right top :D lol

  • Apr 26, 2012
  • jibz
  • United Kingdom
  • Apr 26, 2012

im using manual method of typing question in i-explorer but thtz lengthy process. any other solutions ?

  • Apr 26, 2012
  • jibz
  • United Kingdom
  • Apr 26, 2012

i cant see diagrams for soem questions. any 1 else experiencing same problem? any solution for it guyz ?

  • Apr 26, 2012
  • tsa
  • Saudi Arabia
  • Apr 26, 2012

passed ICND2 972/1000 .Qts in my exam VTP Configuration Sim,Hotspot Frame-relay Question (from CCNA section),OSPF,Subnetting,IPv6,ACL.
source of study http://www.9tut.com/category/ccna ,http://www.9tut.net/category/icnd2,Cisco.ActualTest.640-816.v2011-09-15.by.xallax.519q,Cisco.ActualTest.640-802.v2012-02-26.by.Jericho.632q and last but not the least special thanks to Jeremy Cioara for his CBT Nuggets Tutorials and xallax

  • Apr 26, 2012
  • Steve
  • South Africa
  • Apr 24, 2012

Dump is still 100% good
9tut helped with the Sims and I used the Wendel Odom text book as well
good luck

  • Apr 24, 2012
  • Ugly
  • United States
  • Apr 23, 2012

Thanks..

  • Apr 23, 2012
  • WSL
  • Iraq
  • Apr 23, 2012

@Ugly

Thanks man,

the answers for IPv6 are correct because any IPv6 address start with 2000: or 2001: is reserved for global internet access
so the other 4 answers are valid IPv6 address to use locally

  • Apr 23, 2012
  • Ugly
  • United States
  • Apr 23, 2012

WSL, congrats on Passing.

  • Apr 23, 2012
  • Ugly
  • United States
  • Apr 23, 2012

WSL or Anyone,
I have noticed the primary the last about 25% is this test are drag n drops. About, how many DnD questions were there in your drill and how many questions were there overall?
I am planning on taking the test within the next two weeks. I am studying using This exam, 9TUT and Packet Tracer.
Also, how much IP6 did you run into? I'm not sure how many questions there are in this exam, but most of the answers seem to be wrong, exam "F" Question 14:Identify the four valid IPv6 addresses. (Choose four.)
A) ::
B)::192:168:0:1
C)2000::
D)2001:3452:4952:2837::
E)2002:c0a8:101::42
F)2003:dead:beef:4dad:23:46:bb:101
The correct answers show as A, B, E and F. I am just not sure that those are correct.
Anyone can reply. (Please reply)
Thanks

  • Apr 23, 2012
  • WSL
  • Iraq
  • Apr 23, 2012

@Phreak

If you issued "no login" command you will have access to telnet without authentication >>> try it in Packet Tracer v5.3.3

  • Apr 23, 2012
  • Phreak
  • United States
  • Apr 23, 2012

Correction Exam B
Q: Which route will be found in the routing table of the Main router?
A: B. R 192.168.2.0/24 [120/1] via 192.168.255.26, 00:00:24, Serial0/0
ref: http://kristie.com/mark/ccna/Cliffs%20TestPrep_%20Cisco%20CCNA-practive%20test%204.pdf

Can anybody explain why this is, I can't find out why?

  • Apr 23, 2012
  • WSL
  • Iraq
  • Apr 22, 2012

Passed ICND2 today with 986/1000 :)
this dump 100% valid + 9tut.com frame-relay sim

  • Apr 22, 2012
  • WSL
  • Iraq
  • Apr 14, 2012

Going to have the exam in the 6th of May, how much the WAN Questions are important?

  • Apr 14, 2012
  • chas
  • United States
  • Apr 14, 2012

@Aux09

Purchase a full copy of Visual CertExam to read VCE files. Very affordable and worth every pennies of it.

  • Apr 14, 2012
  • Aux09
  • United States
  • Apr 13, 2012

Gents,

I am looking for VCE code. I am schedule to take the ICMD2 on May 12.
Please I need your help.

Regards,
Francky

  • Apr 13, 2012
  • Ciscofan
  • Poland
  • Apr 13, 2012

Dump is still 100% valid, thx for Uploader!
I passed today 972 score :)

  • Apr 13, 2012
  • rka61
  • United Kingdom
  • Apr 13, 2012

Passed today with 950. Took test in UK, this is still 100% very valid. Cannot beleive I am a CCNA now!!!
I got a VTPM config sim and Frame relay question that I had to console onto to find the answers.
Total of only 43 quesitons in exam with pass mark of 825. The smaller the number of questions the less you can get wrong.
Practise the SIM's with some software. I was using Cisco Packet Tracer good and free.
Now onto the CCNP Routing the switching.
All the best to the rest of you guys.. There is a light at the end of the tunnel

  • Apr 13, 2012
  • Gypsy
  • United Arab Emirates
  • Apr 13, 2012

Valid 2 news questions. I passed 12 April, 2012 with 972/1000

  • Apr 13, 2012
  • chas
  • United States
  • Apr 13, 2012

Passed today. This dump has a good number of valid questions, but you must know the concept then use dumps to test your knowdlege.

  • Apr 13, 2012
  • M.H
  • United States
  • Apr 09, 2012

I just had VTP Configuration Sim. Check www.9tut.com

  • Apr 09, 2012
  • rudy
  • United States
  • Apr 09, 2012

dump valid passed with a 888 march 30, sorry about not putting it in sooner

  • Apr 09, 2012

Add Comments

Only Registered Members Can Download VCE Files or View Training Courses

Please fill out your email address below in order to Download VCE files or view Training Courses. Registration is Free and Easy - you simply need to provide an email address.

  • Trusted By 1.2M IT Certification Candidates Every Month
  • VCE Files Simulate Real Exam Environment
  • Instant Download After Registration.
A confirmation link will be sent to this email address to verify your login.
Already Member? Click Here to Login

Log into your ExamCollection Account

Please Log In to download VCE file or view Training Course

Please provide a correct E-mail address

Please provide your Password (min. 6 characters)

Only registered Examcollection.com members can download vce files or view training courses.

Registration is free and easy - just provide your E-mail address. Click Here to Register

SPECIAL OFFER: GET 10% OFF

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |