Pass Your Cisco 642-832 Exam Easy!

Get 100% Real Exam Questions, Accurate & Verified Answers By IT Experts

Fast Updates & Instant Download!

Certification Exam: 642-832 (Troubleshooting and Maintaining Cisco IP Networks (TSHOOT v1.0))

Download Free 642-832 Exam Questions

Exam 642-832 - Troubleshooting and Maintaining Cisco IP Networks (TSHOOT v1.0)
Size: 6.12 MB
Posted Date: Thursday, November 24, 2011
# of downloads: 36
Free Download: This file is outdated. Browse other 642-832 VCE Files
Exam
642-832 - Troubleshooting and Maintaining Cisco IP Networks (TSHOOT v1.0)
Size
6.12 MB
Posted Date
Thursday, November 24, 2011
# of downloads
36
Free Download
This file is outdated. Browse other 642-832 VCE Files
Comments
* The most recent comment are at the top
  • sam
  • Jun 22, 2012

got 1000/1000 today. all the tt are valid but they are not easy as mentioned on networktut. you will have to pay more attention in the exam. the problem statement is same for all the tt that clients are not able to ping the web server except for ipv6 and hsrp. these two tts are straight forward. thanks for networkTUT and all who commented. going for security track. for any help you can contact sami_uet08@yahoo.com

  • Jun 22, 2012
  • TshooT
  • Georgia
  • Apr 17, 2012

@ Rajdeep from United States

Thanks for your sharing experience ! :) Could you give me your mail and in case of question i am kindly asking you to give me some advice !

Thanks in advance

  • Apr 17, 2012
  • Rajdeep
  • United States
  • Apr 16, 2012

TSHOOT Passed Today with 931/1000.

Got 1 MCQ , 1 D&D , 13 TT :
----

-- MCQ :

Router(config)#access-list 199 permit tcp host 10.1.1.1 host 172.16.1.1
Router(config)#access-list 199 permit tcp host 172.16.1.1 host 10.1.1.1
Router#debug ip packet 199

What would be the output shown on the console?

A - All IP packets passing through the router
B - Only IP packets with the source address of 10.1.1.1
C - All IP packets from 10.1.1.1 to 172.16.1.1
D - All IP packets between 10.1.1.1 to 172.16.1.1

-- D&D

FCAPS-model defined by the International Organization for Standardization (ISO).
ITIL- framework for it prof
TNM-network management model is the Telecommunications Standardization Sector's (ITU-T)
Cisco lifecycle-model is often referred to as the PPDIOO model

---------------------

Except EIGRP AS all TTs came.

If it is 169.x.x.x there are 4-TTs
1.ASW1 - port security (show-run ASW1 if 1/0/1 and 1/0/2 are in Vlan10 )
2.ASW1 - access vlan 10 (show-run and check ASW1 if 1/0/1 and 1/0/2 are in Vlan1, if they are. stop!)
3.ASW1 - switch-to-switch (show-run ASW1)
4.R4 - DHCP excluded (show-run R4)

If client got IP address then 2 options:
-First, if client1 can ping 10.1.1.1 not to server 209.65.200.241 (3TT) ALL IN R1

MY TRICK ON THIS ONE :

1. If sh ip BGP summary - Up/UP.. R1 - NAT (10.2.0.0)
2.If sh ip BGP summary - Nothing ..R1 - BGP (56-65)
3.If sh ip BGP summary - Active .. R1 - ACL

-Second , Client can't ping 10.1.1.1 but it can ping to 10.1.1.2) then: (1TT)
4-R1 - OSPF authentication (show-run R1 + R2)

Thirdly, if client1 cannot ping 10.1.1.1, then (4 TTs)
1. DSW1(ASW1) - vlan access map
2. R4 - Route redistribution:
3. R4 - EIGRP Passive Interface: passive interface (show-run R4)


Thanks for your supports guys .. Finally CCNP Certified !!! :D Cheers !!

  • Apr 16, 2012
  • Rajdeep
  • India
  • Apr 16, 2012

@TshooT . Both Torrent link having the same video . Part :2 you can say, it's a alternate link for the first torrent. If first torrent you are not getting seeds use alternate link.

will share one more New TSHOOT - CBT torrent.

Thanks.

  • Apr 16, 2012
  • TshooT
  • Georgia
  • Apr 15, 2012

@ Rajdeep from India

What's the link part 2 ? what this it mean ?

  • Apr 15, 2012
  • Rajdeep
  • India
  • Apr 15, 2012

TSHOOT CBT Part 2 : http://kat.ph/cbt-nuggets-cisnp-tshoot-642-832-t5820768.html

  • Apr 15, 2012
  • Rajdeep
  • India
  • Apr 15, 2012

Here CBT Torrent : http://isohunt.com/torrent_details/318885781/?tab=summary

  • Apr 15, 2012
  • TshooT
  • Georgia
  • Apr 15, 2012

@ Jessica,

Please check mail ! :)

  • Apr 15, 2012
  • TshooT
  • Georgia
  • Apr 14, 2012

@ jessica from Australia,

Please check you Mail ! :)

  • Apr 14, 2012
  • jessica
  • Australia
  • Apr 14, 2012

@kamran
Sorry kamran bt i dont have the lab solutions yet.. as soon as i get them i will forward them to you.....

good luck

  • Apr 14, 2012
  • TshooT
  • Georgia
  • Apr 13, 2012

@ jessica and Jamshid
Could you send me your mail or Skype ID ? I will send it via mail or Skype :)

  • Apr 13, 2012
  • BLIKVI,
  • Georgia
  • Apr 13, 2012

@ jessica and Jamshid
Could you send me your mail or Skype ID ? I will send it via mail or Skype :)

  • Apr 13, 2012
  • jamshid
  • India
  • Apr 12, 2012

@tshoot ofcourse i need that if u dont mind please provide..

  • Apr 12, 2012
  • jessica
  • Australia
  • Apr 12, 2012

@Tshoot..
yup please share it.. that would be great;)

thanx for your concern

  • Apr 12, 2012
  • TshooT
  • Georgia
  • Apr 12, 2012

Guys, does anyone want CBT nuggets ? I can share it wid you !

  • Apr 12, 2012
  • TshooT
  • Georgia
  • Apr 12, 2012

@jessica,

Sure i can provide.. I have just downloaded from torrent, if you do not want to try it viatorrent i will share (upload) it another file server !!! Just le me know !

  • Apr 12, 2012
  • jessica
  • Australia
  • Apr 12, 2012

hi guysss.. could anyone please provide me with the cbt nuggets tshoot free download link ..i tried alot of sites bt still couldn't get the free version.. i would appreciate your help..

Thanx in advance

  • Apr 12, 2012
  • Ali
  • India
  • Apr 04, 2012

Hi, everyone.
For those of you who don't have proper idea about the exam format , then clear you confusion by watching these videos "Tshoot strategies " by Kevin Wallace, CCIE#7945 . Very Helpful.
http://www.youtube.com/watch?v=3Bo4Pw82G2M&feature=related
watch all the Parts!

  • Apr 04, 2012
  • JR_CCNP
  • Brazil
  • Apr 03, 2012

100% Valid, pass with 945

  • Apr 03, 2012
  • new_ccnp
  • United States
  • Apr 02, 2012

One last thing, Cisco has a sample of the TSHOOT exam format here: http://www.cisco.com/web/learning/le3/le2/le37/le10/tshoot_demo.html

This sample is not material that you will find on the exam, but it is good to familiarize yourself with the format for the TTs as they will by far count for the vast majority of the exam.

  • Apr 02, 2012
  • new_ccnp
  • United States
  • Apr 02, 2012

Passed TSHOOT last week. Don't bother using any of the vce files for the tshoot exam, i would suggest using networktut.com for this exam as it presents the Trouble Tickets (TTs) in a much more logical manner than do the vce files. This is a first for me as I've been using vce's for a bunch of cert exams, but in this case, it's a waste of time. Also, you'll find good explanations from the users at the networktut.com site for each trouble ticket that will help you considerably.

My exam consisted of 3 MCQs, 1 D&D and 13 TTs. Each TT has 3 questions associated with it. All of the TTs use the exact same network but give you 13 seperate issues that must be identified. For each of the 13 TTs, you must first identify the switch or router that has the configuration issue, then identify the nature of the problem, then identify the solution for the problem.

Perfect method to use in preparing for this exam:
http://www.networktut.com/tshoot-ticket-1/comment-page-3#comments

Find Belal's post from the above url posted on Jan 8th, 2012 and he outlines how to effectively determine which of the possible 14 trouble tickets (I received only 13 on my exam, but there are 14 possible TTs) you are working on so as to save much of your time on this exam.

In case you don't already have it, here's a link to the official cert guide for this test: http://www.4shared.com/office/09wtd3sT/642-832_tshoot_-_kevin_wallace.html - get it while the link is still valid

Best of luck to all! Thanks to examcollection.com for your excellent site and to the folks at networktut.com and all the other "tut" sites for their help in getting me through the whole ccnp track.

  • Apr 02, 2012
  • akhtar ali
  • Pakistan
  • Apr 02, 2012

salam to all today i pass t-shoot exam if any one difficulties then tell me ok its my cell no 03464180722

  • Apr 02, 2012
  • seriously
  • United States
  • Apr 01, 2012

sheraz - seriously, why don't you just ask someone to take the test for you..how about instead of asking for the answers in a nice & friendly email you do what the rest of us have been doing and read through the thread and find the answers. Or..maybe instead you'd like us to serve you some punch, and pay for your exam?!?

  • Apr 01, 2012
  • sheraz
  • Pakistan
  • Apr 01, 2012

Need To help Please send me Commands. Solution required

Sherazs_ali@yahoo.com



ASW1 1. Access port not in VLAN 10
2. Port Channel not allowing VLAN 10
3. Port Security
DSW1 1. HSRP track 10
2. VLAN filter
R1 1. Wrong IP of BGP neighbor
2. NAT - Access list mis-configured
3. Redistribute access-list
4. OSPF Authentication
R2 1. IPv6: enable OSPF
R4 1. EIGRP - wrong AS
2. Redistribute ("to" & -> )
3. DHCP Range mis-configured
4. EIGRP Passive Interface

  • Apr 01, 2012
  • aym
  • Libya
  • Mar 28, 2012

vaild 100%
passed today :) thanks for everything

  • Mar 28, 2012
  • TTK thailand
  • Thailand
  • Mar 28, 2012

Pls see networktut.com valid 1000%

  • Mar 28, 2012
  • sheraz
  • Pakistan
  • Mar 28, 2012

Marwan Hassan,

Please send me LAB solution ??
send me your Email address ???

Sherazs_ali@yahoo.com

  • Mar 28, 2012
  • Marwan Hassan
  • Pakistan
  • Mar 27, 2012

hi all,
I passed my TShoot paper today obtaining 1000/1000 and i did it like the blink of an eye...just take it easy when u start ur paper and be relaxed..there were 13 TTs, one D&D and 3 MCQs...Best of luck..

  • Mar 27, 2012
  • Sunny
  • Australia
  • Mar 24, 2012

I am taking TSHOOT exam next week. Just wondering how many questions ? (13 tickets mean 13 questions) or (13 tickets out of 4 scenarios).
I am scared as to how come one can do all 12 to 13 scenarios in 2 hrs. Hence wondering.Thanks in advance. You people rock as always.

  • Mar 24, 2012
  • Kashif Manzoor
  • Pakistan
  • Mar 19, 2012

@ Trouble Shooter.. congrates for UR passing the exam.. kindly tell, are the dumbs OK, I mean there are few questions, Are these questions VALID ?? THANK U.

  • Mar 19, 2012
  • saba
  • Pakistan
  • Mar 19, 2012

@ sweet .plz tell me, the ip addresses are mentioned on each device in the network or not.?? and tell me about ur ip addresses in the exam. here on website, these are 10.1.x.x and 10.2.x.x. what were in exam??

  • Mar 19, 2012
  • Sweet
  • India
  • Mar 19, 2012

@SABA

It was the same network layout with different IP addressing,and some of the configs were different as well. But they really didn't affect the answers. I have used the method what networktut has mention and the answers were slightly different on the real exam.

  • Mar 19, 2012
  • faisal
  • Pakistan
  • Mar 17, 2012

@chris. kindly tell me what was ur strategy for exam.post ur scheme.n all TT and configuration is same or different as in dumps??

  • Mar 17, 2012
  • Chris
  • Mexico
  • Mar 17, 2012

passed with 900 marks.

This dumps is 100% valid.

  • Mar 17, 2012
  • saba
  • Pakistan
  • Mar 14, 2012

@sweet kindly tell me the configuration which is mentioned in dumps is same or different?? and kindly post ur scheme for preparation

  • Mar 14, 2012
  • Sweet
  • India
  • Mar 14, 2012

Hi all, I have passed T Shoot exam with 940 today. I wouldn't not say its easy unless you know what you are doing. For everyone who are planning to write the exam please make sure you know the concept very well. All the questions were from networktut.These dumps are valid. I have only two drag and drop and one multiple choice question. I have 13 TT tickets. There were small changes in the configuration and IP addressing.
I didnt have the EIGRP AS ticket. Good luck for who are planning to take the exam.

  • Mar 14, 2012
  • K4N3C
  • Czech Republic
  • Mar 14, 2012

I've just passed my TSHOOT exam with 1000/1000 :-) Dump is valid exept for some small changes in port numbering and addressing, but if u know what u do, u r ok ;-)

  • Mar 14, 2012
  • jeep70
  • United States
  • Mar 13, 2012

@sweet
Much appreciated if you can post about your tshoot exam. I am studying for it and would like an idea of how it is. Good luck and write well!!

  • Mar 13, 2012
  • saba
  • Pakistan
  • Mar 13, 2012

@ sweet. all the best

  • Mar 13, 2012
  • Sweet
  • India
  • Mar 13, 2012

Sure Will post tomorrow

  • Mar 13, 2012
  • saba
  • Pakistan
  • Mar 13, 2012

@ sweet, do post ur comments after ur exam.

  • Mar 13, 2012
  • Sweet
  • India
  • Mar 12, 2012

Greetings!!!
If anybody had done the Tshoot exam please share your experiance. Are there any new questions out of these dumps. please comment asap as I am planning o take the exam on 14th. Will we a great help

  • Mar 12, 2012
  • saba
  • Pakistan
  • Mar 12, 2012

plz do comment here, i am going to take the exam on 20th of this month.people who passes the exam , kindly leave the comments here.

  • Mar 12, 2012
  • epic
  • United States
  • Mar 09, 2012

just passed with a 921/1000. there were a couple additional questions, one of which was a dhcp exclusion typo, and there was one that was a port channel that didnt have an interface in the channel group. channel group 13 on asw1.

  • Mar 09, 2012
  • Jeff
  • United States
  • Mar 08, 2012

Passed today with 980. 4 MCQ's question, however they were new ones. No D&D. 14TT, all from networktut.

  • Mar 08, 2012
  • Worried! :(
  • India
  • Mar 08, 2012

Hello friends..i really need alot of help from u all..right now i m preparing for TSHOOT ! I am taking exam on 15th march..

I want to know the pattern of the question asked in the Trouble Ticket!

Does the trouble ticket state only the pinging from source to destination (eg:-Client 1 is not able to ping web server, & tell us to find the faulty device) OR does the TT question states the faulty device & the technology used & give us a hint about the TT being asked? (eg- Client is able to ping 10.1.1.1 but not 10.1.1.2, INITIAL TROUBLESHOOTING SHOWS THAT R1 DOES NOT HAVE ANY OSPF NEIGHBORS) ??

Does only SHOW RUN command solves every TT ?

Please please help me asap..Worried! :( :(

  • Mar 08, 2012
  • jeff
  • United States
  • Mar 05, 2012

Do you people actually study or do you just rely on this dumps? These dumps are meant as a supplement to your studying and real world experience.

  • Mar 05, 2012
  • Rizwan
  • Germany
  • Mar 05, 2012

passed with 945 marks.

This dumps is 100% valid.

  • Mar 05, 2012
  • Bingo
  • Sweden
  • Mar 05, 2012

Thank you for your response tiredoftestwriting. But in my own case, I used ipconfig on client1, when I get an IP address range of 169.x.x.x, I assumed the problem is from ASW1. For me to know which technology the problem is related to and the solution, I tried to use sh run int fa1/0/1 and sh run int fa1/0/2 and sh int fa1/0/1 & sh int fa1/0/2, but non of these commands worked on the devices. The sh run command did not give out any tangile information about the device. I also got IP address range of 10.x.x.x which made to know the problem will be from DSWI or R4 or R2 or R1, I ping to and from each of these devices to know the actual fault device. But my problem is that of getting the actual technology to which the problem is related to as sh run did not give out any information on the devices and on R1 sh run int serial 0/0/1 did not work. My problems were on ASWI and R1. I want to know from you tiredoftestwriting if you ever used sh run int serial 0/0/1 on R1 and if the command worked on R1. I look forward for your response tiredoftestwriting. Thanks

  • Mar 05, 2012
  • Marwan Hassan
  • Pakistan
  • Mar 03, 2012

hi jose, i have paper on 7 march, kindly tell me is there any troubleshooting required for completing TTs means manual troubleshooting or just to verify from "show" commands..kindly update me asap..i will be highly obliged to you in this regard...

  • Mar 03, 2012
  • tiredoftestwriting
  • Canada
  • Mar 03, 2012

What I mean is that the configs on the devices are different from one TT to another but they all accomplish the same thing so you just can not compare configs. The problems are the same as what are described here so you need to understand the concepts and not just memorize the configs. For example in teh EIGRP passive interface TT I was looking for a question with only 1 passive command, turns out that in order to work you only need 1 not both. So I had a TT that had no no pasive intrfaces, 1 no passive interface, 2 no passive interface and some with no passive default...You just can not compare configs to see what is different anymore.

  • Mar 03, 2012
  • tiredoftestwriting
  • Canada
  • Mar 03, 2012

@Bingo

Just use show run and search through the config
Show int works fine

  • Mar 03, 2012
  • Bingo
  • Sweden
  • Mar 03, 2012

Dear Colleagues,
I appeal to you all again to please make comments on this discussion below because I want to know whether I am wrong or not. Just tell me if you guys have used sh run int ... and sh int .. commands during the test and if these two commands work on the exam.

I forward this discussion to you to help me out about your suggestion and contributions. I wrote 642-832 exam about two weeks ago. After identifying the faulty devices using ipconfig and ping commands, the fault condition in which the technology was related to could not be ascertained since sh run int and sh int commands did not work on all routers, switches and interfaces, some of which I listed as follows:
ASW1# sh run int fa1/0/1
ASW1# sh int fa1/0/1 & sh int fa1/0/2
ASW1# sh int fa 1/0/1 & sh int fa 1/0/2
ASW1# sh run int fa 1/0/2
DSW1# sh run int fa 1/0/1
DSW1# sh int vlan10
R4# sh run int serial0/0/0.34
R4# sh run int s0/0/0/0.34
R1# sh run int serial0/0/1
R1# sh run int serial 0/0/1
R1# sh run interface serial 0/0/1
R1# sh run int serial 0/0/0.12
R1# sh int
Though the sh run command was working but this command could not show all the interfaces conditions.

I want you guys to help me out by advising me if I had used wrong commands or if those commands listed above supposed to generate outputs. I anxiously waiting for comments

  • Mar 03, 2012
  • puck
  • Australia
  • Mar 03, 2012

Lot of people are talking about new questions but at the end they say that the answers are the same..how can be possible? Can anyone tell mee what's going on? Got booked the exam on next monday!!! thanks!

  • Mar 03, 2012
  • jose
  • Spain
  • Mar 02, 2012

today in spain, passed 945/1000. 1 new question on R1, and hadn´t HSRP question.
how to configure the routers are different but the answers the same.

  • Mar 02, 2012
  • tiredoftestwriting
  • Canada
  • Mar 02, 2012

Passed this test. Dumps very valid. 1 warning, the configurations were different. By that I mean if you looked at the same router in 3 diferent TT each one had a different config which made it VERY dificult to comapre configs to isolate the trouble. But if you have the concepts and know the TT you can still pass, I made 900+.

  • Mar 02, 2012
  • bruce
  • South Korea
  • Mar 02, 2012

thank you!

today I passed test! my score was 986/1000
the part of trouble shoot was perfectly same this dump's

god bless you~!

  • Mar 02, 2012
  • Bingo
  • Sweden
  • Mar 01, 2012

Dear YourHelp from Switzerland,

I forward this discussion to you to help me out for your suggestion and contributions since you passed this exam 100%. I wrote 642-832 exam about 13 days ago. After identifying the faulty devices using ipconfig and ping commands, the fault condition in which the technology was related to could not be discovered since sh run int and sh int commands did not work on all routers, switches and interfaces, some of which I listed as follows:
ASW1# sh run int fa1/0/1
ASW1# sh int fa1/0/1 & sh int fa1/0/2
ASW1# sh int fa 1/0/1 & sh int fa 1/0/2
ASW1# sh run int fa 1/0/2
DSW1# sh run int fa 1/0/1
DSW1# sh int vlan10
R4# sh run int serial0/0/0.34
R4# sh run int s0/0/0/0.34
R1# sh run int serial0/0/1
R1# sh run int serial 0/0/1
R1# sh run interface serial 0/0/1
R1# sh run int serial 0/0/0.12
R1# sh int

I want you to help me out by advising me if I had used wrong commands or if those commands listed above were supposed to generate outputs. I am anxiously waiting for comments.

  • Mar 01, 2012
  • shahzad
  • Pakistan
  • Feb 29, 2012

@YourHelp plz send me Boson Exam Environment please the below email

shaz.shaz@yahoo.com

thanks in advance

  • Feb 29, 2012
  • Bingo
  • Sweden
  • Feb 29, 2012

Dear Colleagues,
I forward this discussion to you to help me out about your suggestion and contributions. I wrote 642-832 exam about 12 days ago. After identifying the faulty devices using ipconfig and ping commands, the fault condition in which the technology was related to could not be ascertained since sh run int and sh int commands did not work on all routers, switches and interfaces, some of which I listed as follows:
ASW1# sh run int fa1/0/1
ASW1# sh int fa1/0/1 & sh int fa1/0/2
ASW1# sh int fa 1/0/1 & sh int fa 1/0/2
ASW1# sh run int fa 1/0/2
DSW1# sh run int fa 1/0/1
DSW1# sh int vlan10
R4# sh run int serial0/0/0.34
R4# sh run int s0/0/0/0.34
R1# sh run int serial0/0/1
R1# sh run int serial 0/0/1
R1# sh run interface serial 0/0/1
R1# sh run int serial 0/0/0.12
R1# sh int
Though the sh run command was working but this command could not show all the interfaces conditions.

I want you guys to help me out by advising me if I had used wrong commands or if those commands listed above supposed to generate outputs. I anxiously waiting for comments

  • Feb 29, 2012
  • ITBOSS
  • Lebanon
  • Feb 28, 2012

@YourHelp can you post the Boson so we can download it?

  • Feb 28, 2012
  • YourHelp
  • Switzerland
  • Feb 28, 2012

I bought it here: http://www.boson.com/practice-exam/642-832-cisco-tshoot-practice-exam
Very similar to the actual exam. Can totally recommend it.

  • Feb 28, 2012
  • rizwan zahir
  • Germany
  • Feb 27, 2012

@yourhelp , can you please upload the boson exam?

  • Feb 27, 2012
  • AlejandroC
  • Bolivia
  • Feb 27, 2012

@YourHelp where could i download the Boson Exam ?
Thanks

  • Feb 27, 2012
  • YourHelp
  • Switzerland
  • Feb 27, 2012

Hi guys! Passed with 1000 using this dump and the Boson Exam Environment. The drag'n'drops and MC questions were different, but the TT were exactly the same as in this dump. For more info, visit http://www.networktut.com/ where you find all the TT. Good luck!

  • Feb 27, 2012
  • Tifa
  • Saudi Arabia
  • Feb 26, 2012

No, i have about 4 new questions not included on this file.
I mean if ur choice R1, on any ticket u'll find the same answers for R1 , that mean the choices for Q2&Q3 on each ticket are depending on the answer for the first Q1.
So u have take care for 1st Q1, it should be true.

  • Feb 26, 2012
  • abcd
  • United Arab Emirates
  • Feb 26, 2012

tifa what you meen dont choice 1 first question..
actively i faild yesterday.and all the ticket was new.
did you got the same question from this website ?

  • Feb 26, 2012
  • Tifa
  • Saudi Arabia
  • Feb 26, 2012

Hi,
thanks God.I passed 890/1000.
Thanks Peter for your help. almost all questions are up to date.
really it's very difficult exam, i spend all the 2 hours to finish.
Note: please don't try to choose the first choice if u r not sure it's a true choice, because the next 2 choose question are depending on it (first choose question) and their answers will change depending on the choice answer for the first question.

Thanks

  • Feb 26, 2012
  • abcd
  • United Arab Emirates
  • Feb 25, 2012

benny i will answr you by tomorrw..

  • Feb 25, 2012
  • benny hill
  • Croatia
  • Feb 25, 2012

ok, tnx to you too. I'll be waiting for your answers

  • Feb 25, 2012
  • abcd
  • United Arab Emirates
  • Feb 25, 2012

benny thanks.and wait i will check and tell you whether these question are same or not.

  • Feb 25, 2012
  • abcd
  • United Arab Emirates
  • Feb 25, 2012

benny yes same topology .
are you going to take exam ?.do you have new dump ?.please send me.
yuvaisking@yahoo.com.

  • Feb 25, 2012
  • benny hill
  • Croatia
  • Feb 25, 2012

take a look of this "http://www.networktut.com/tshoot-share-your-experience"
ipv6 topology, and and tell me is that it (I guess it is)

  • Feb 25, 2012
  • abcd
  • United Arab Emirates
  • Feb 25, 2012

benny.yes yes the topology is same.but new tickets.

  • Feb 25, 2012
  • abcd
  • United Arab Emirates
  • Feb 25, 2012

topology is same but something new like RIPng and OSPF nssa.
passive interface.tunnel link.and only three questen was same but all 14 tickets are new..

  • Feb 25, 2012
  • benny hill
  • Croatia
  • Feb 25, 2012

@abcd

Was there any change in toplogy as well or this one is still valid https://learningnetwork.cisco.com/docs/DOC-6738 "TSHOOT Exam Topology"

  • Feb 25, 2012
  • abcd
  • United Arab Emirates
  • Feb 25, 2012

benny all are new tickets..i got only 356/1000
wait for new tumb.

  • Feb 25, 2012
  • benny hill
  • Croatia
  • Feb 25, 2012

@abcd

Can you please give some explanation about what is changed?

  • Feb 25, 2012
  • kennah
  • Kenya
  • Feb 14, 2012

please anyone share the link where i can get CBT nuggets for tshoot, the files were removed from the links below


http://www.wupload.com/file/34272014
http://www.wupload.com/file/34279468
http://www.wupload.com/file/34279127
http://www.wupload.com/file/34272016
http://www.wupload.com/file/34272017
http://www.wupload.com/file/34271536

or

http://www.fileserve.com/file/gGB4fsk/CBT642-832.part1.rar
http://www.fileserve.com/file/KZBkCyJ/CBT642-832.part2.rar
http://www.fileserve.com/file/XQpPjC2/CBT642-832.part3.rar
http://www.fileserve.com/file/E6aetCj/CBT642-832.part4.rar
http://www.fileserve.com/file/g7FZvrP/CBT642-832.part5.rar
http://www.fileserve.com/file/XctzVmR/CBT642-832.part6.rar

or

http://www.filesonic.com/file/1308328264/CBT642-832.part1.rar
http://www.filesonic.com/file/1308328304/CBT642-832.part2.rar
http://www.filesonic.com/file/1308328284/CBT642-832.part3.rar
http://www.filesonic.com/file/1308328294/CBT642-832.part4.rar
http://www.filesonic.com/file/1308341264/CBT642-832.part5.rar
http://www.filesonic.com/file/1308337904/CBT642-832.part6.rar

my mail address k.kennah2012@gmail.com

  • Feb 14, 2012
  • joemon
  • India
  • Feb 14, 2012

I passed the tshoot exam on 7th feb. Thanks God. , completed all the 3 papers
and get CCNP certified. wish all the best to all..

  • Feb 14, 2012
  • Newbie
  • Hong Kong
  • Feb 11, 2012

I passed the exam 3 hours ago and the dump is still valid.
But DON'T too rely on this dump, because

1. 2 tickets are missing when comparing with networktut (DHCP Range & EIGRP Passive Interface)

2. In real exam, there are 6 MC answers available which 2 more MC answers than the dump. And those extra MC choices are similarly with the real answer.
Very confused.

3. Dont memorize the exact answer, some minor changes had been made by CISCO (i think), they may present the answer in other words. So you must understanding the answer rather memorize them

To ensure you will pass the exam, read the tips & comment in networktut. Very useful

  • Feb 11, 2012
  • Passed
  • Belgium
  • Feb 10, 2012

Passed 1 week ago with 945 . The dump is valid and if you failed it means that you didn't read it carefully. Go to networktut and read through all the remarks people had(study remarks to every questions) and learn/memorize short version, then you can easily eliminate the questions one by one on the exam knowing how many left with what problems

  • Feb 10, 2012
  • Yolanda
  • Kenya
  • Feb 09, 2012

Hi all,
Please assist with the link where i can download CBT Nuggets for tshoot.

  • Feb 09, 2012
  • ciscodingo
  • United Kingdom
  • Feb 08, 2012

one of the questions which is to resolve client connectivity for dhcp and ftp has the wrong answer, the dump has as the correct answer;

issue switchport trunk allowed vlan10,200 on interface portchannel13 and 23 on ASW1

This is wrong as it only allows vlan10 & 200 and removes the vlan's 1- 9.

The correct answer is either;
Change vlan assignment on the ports to vlan 1
or
issue switchport trunk allowed vlan **add**10,200 on interface portchannel13 and 23 on ASW1 (if this is an option in the answers).

  • Feb 08, 2012
  • jose
  • Spain
  • Feb 07, 2012

hi tshoot, the test content is almost as explained in this web

http://www.networktut.com/

  • Feb 07, 2012
  • bijesni
  • Croatia
  • Feb 07, 2012

failed today with score of 780, and 790 was for pass.
2 or 3 tickets were really strange, because i could not choose the right answer after i found the problem. For instance Vlan fliter test1 on DSW1 was a problem, but there was no offered soultion in the answers for DSW1, and i found the answer on ASW1 although there was no Vlan filtering on ASW1 neither was ASW1 a problem.
Also there was some addition to the toplogy, and now you have not only eigrp 10 between DSWs and R4, there is also RIPng named RIP_ZONA, there is a gree tunneling between R4 and R3, and some other smaller changes, but ip addressing remains the same

  • Feb 07, 2012
  • Tshoot
  • India
  • Feb 06, 2012

hi friends.i need some help regarding tshoot exam!
I m preparing for the exam.n i guess ill write d exam this month end.
i want 2 know d details.how many trouble tickets r there in exam?r al d TT from dump?
What abt D n D.? MCQ's?? What is d total number of questions in exam including TT? Please help.Need ur suggestions! Thanks! :)

  • Feb 06, 2012
  • ITBOSS
  • Lebanon
  • Jan 26, 2012

Congrat TJ but do you mean that answers are the same as dump but the way of asking the question is different?

  • Jan 26, 2012
  • tj
  • United Kingdom
  • Jan 26, 2012

Pass on tuesday 931/1000,the dumps is still valid and I have a flow chart that we help you so that the question we not look the same.and more also don't guess answer,cisco have a way of confusing u when you guess answers.

  • Jan 26, 2012
  • ITBOSS
  • Lebanon
  • Jan 20, 2012

Hi Basil, hard luck but why you failed? wasn't same as the dump?

also, guys, when you say tricky, what do you mean? questions are different from the dump?

Thx for sharing :)

  • Jan 20, 2012
  • basil aldossari
  • Saudi Arabia
  • Jan 19, 2012

i failed with 780 score :(

  • Jan 19, 2012
  • wEKa
  • Saudi Arabia
  • Jan 16, 2012

FAAAAAAAAAAAAAAAILED 5 min ago :(

yes Ahmed you can . but Tack Care :( i confused. all Q is the same.


Regards,
wEKwEK

  • Jan 16, 2012
  • shery
  • Egypt
  • Jan 16, 2012

please i need to know, ticket have 3 question, can i make rollback for previous question

  • Jan 16, 2012
  • Ken
  • Hong Kong
  • Jan 13, 2012

Hi Everyone,

Today I did the exam and got 986, lol I passed, they exam is very very easy, just stay clam and chill, you have soo much time to do it, so dont ever rush, just take it easy.everything is the same as mentioned on this site

Some of the configuretion is a bit tricky but you can easily find out the mistake.

I got 3 MC (1 new MC) and got 100% in Troubleshoot may be 1 got the new MC wrong, if not I could have got 1000.

Anyways all the best and thx everyone for their posts and support.

Take Care,
Ken

  • Jan 13, 2012
  • Ahmed
  • Malaysia
  • Jan 11, 2012

please follow @Jorge . i passed with 986 today from malaysia. all come from the dump. but very tricky. please careful. . and sensitive.

  • Jan 11, 2012
  • arsenumber4
  • Malaysia
  • Jan 10, 2012

Passed the exam about 3 hours ago with 945 marks. Look very easy in the dump but careful, it's tricky

  • Jan 10, 2012
  • Suresh
  • India
  • Jan 09, 2012

Hello Guys,

I have cleared my exam today and scored 900+, 90% of questions are from this dump and have to answer the tickets carefully as those are more tricky than we see in dumps.
2 to 3 tickets and 1/2 MCQ are out of this dump, So careful

  • Jan 09, 2012
  • Gogi
  • United States
  • Jan 07, 2012

Passed with 930 today. Not all the tickets on the exam, plus it's a lot trickier, now when you go beck to look a the right ticket you will see a different configuration, so you have to know what is going on.

  • Jan 07, 2012
  • Jorge
  • United States
  • Jan 05, 2012

Dump is 100% I just passed this morning 1000/1000. Also make sure you visit networktut.com.

My strategy (from Networktut.com) for TSHOOT tickets

Open CLT1 - do Ipconfig
1. no IP address or receive 169.xx.xx.xx (4 Tickets here)
ASW1 - Access VLAN, Trunking, Port Security
R4 - DHCP excluded
2. Search unique questions
R2 - IPv6 (check the question with showing the IPv6 address and this is the only question showing the IPv6 question)
DSW1 - HSRP (sh run - you can see the tracking command there and it is the only question have the tracking command)
3. receive IP address (10.2.1.3), can't ping 10.1.2.254 (Gateway) from CLT1
DSW1 - VLAN ACL
4. receive IP address (10.2.1.3), can't ping 10.1.1.2 (R2 to R1 interface) from CLT 1
R4 - Passive interface, EIGRP AS no., Redistribution (wrong route map name)
5. receive IP address (10.2.1.3), can't ping 10.1.1.1 (R1 interface) from CLT 1
R1 - OSPF Authentication
6. receive IP address (10.2.1.3), can ping 10.1.1.1 (R1 interface) from CLT 1
R1 - NAT (sh ip bgp summary - can see peering, sh run - no VLAN 10)
R1 - BGP (sh ip bgp summary - no peering establish, sh run - wrong neighbor address)
R1 - ACL (sh ip bgp summary - no peering establish, sh run - no permit the 209.65.200.224 0.0.0.3)

If you can remember this you will pass the test with no issues!

  • Jan 05, 2012
  • Roy
  • India
  • Dec 29, 2011

Passed ROUTE on 2nd December..
Passed SWITCH on 22nd December..
Passed TSHoot on 29nd December..


..

Got Job today itself, in TATA COMMUNICATIONS LTD..

  • Dec 29, 2011
  • jahboi
  • Nigeria
  • Dec 28, 2011

passed.
mcqs changed.
no eigrp AS
check networktut

  • Dec 28, 2011
  • ahmad
  • Turkey
  • Dec 26, 2011

exam is valid.

i got 1000.

also networktut.com is very helpful. please read the comments at networktut very well.

idid not have any D&D questions but i had 3 MCQ and they are at the dumps. and networktut.com

you have to know how to find fault. rest of it very easy.

first start with HSRP and ipv6. both are mentioned in questions.

  • Dec 26, 2011
  • Rudolph
  • Canada
  • Dec 26, 2011

This dump should still be valid as i passed it 901/1000 on 21/12/2011.
The questions are simple and clear but guys you've got to be able to find the answers, don't predict the answers

  • Dec 26, 2011
  • ahmad
  • Turkey
  • Dec 20, 2011

Dear Abubakar and Abulfarage,

first congratulations. hope to see you as CCIE.

which D&D and MCQ we should study ? how many of them did you have in your exam ?

  • Dec 20, 2011
  • Abubakar Abdullahi
  • Iceland
  • Dec 17, 2011

I passed 1000/1000 is still valid

  • Dec 17, 2011
  • abulfarage
  • Saudi Arabia
  • Dec 17, 2011

the lab from this link : http://www.networktut.com/
and about D&D and multi choice no same in pass4
i pass 986

  • Dec 17, 2011
  • Quang
  • Vietnam
  • Dec 17, 2011

i passed 1000/1000. it still valid. no new question.

  • Dec 17, 2011
  • Tom
  • Netherlands
  • Dec 16, 2011

I failed today with 725points.Most of the questions ware the same but not all. During the test the problem with the network occured and the connection was lost. I managed to finish TT7. I started 8 and everything looked Ok, but TT9 was weird. I could find the problem, because PC1 could ping the WebServer, so there were no errors in the configuration. I showed it to the lady from the Examintion Centre. TT10,10 were OK, but TT12 again something weird. I could ping WebServer from PC1 but not from PC2. From PC2 ping couldn't leave R1. There was no entry on R! to block the trafic from PC2. The ACL in NAT was to permit from 10.2.1.3 (PC1) and 10.2.1.4(PC4)-??? The last one TT13 also weird. ON DSW1 there were VACL so I thought there will be no vlan filter XXX vlan-list 10 like in the answers I found here (and it was the only reasonable answer), but this answer was not assigned to DSW1, but I found it in ASW1 which is Layer 2 switch and you can't configure VACL on it I wrote the trouble ticket to Pearson V about it. Or maybe I did somethin wrong with the above Trouble Tickets. Any suggestions?

  • Dec 16, 2011
  • ahmad
  • Turkey
  • Dec 16, 2011

dear abulfarage ,

we are looking forward for your share about the exam.

i hope you will pass easily.

  • Dec 16, 2011
  • Dave
  • Hong Kong
  • Dec 15, 2011

abulfarage from Saudi Arabia,

Thx a lot, pls tell us in very detail coz i will exam this mth as well.

  • Dec 15, 2011
  • abulfarage
  • Saudi Arabia
  • Dec 15, 2011

today i have exam CCNP-TSHOOT at 12.30
and i will tell every body about my exam .
bring for me
thank you

  • Dec 15, 2011
  • Dave
  • Hong Kong
  • Dec 14, 2011

wow, how can you do it in 1 week of studying, do you use MSN, we can chat there.pls provide your MSN, i will add you, if you dont mind we can share our experiences.

  • Dec 14, 2011
  • ahmad
  • Turkey
  • Dec 14, 2011

i am not telling you to memorise completely.

but just understand the concepts of tickets at dump.

next week i will attend the exam, i will share the score with all of you. i just new passed the switch exam weekend with 956.

next week tshoot i hope and then CCNP. and of course CCIE.

  • Dec 14, 2011
  • Dave
  • Hong Kong
  • Dec 14, 2011

@ Ahmend,

Thx a lot, so i will memorize all 13 tkts, did u done the exam alreay

  • Dec 14, 2011
  • ahmad
  • Turkey
  • Dec 14, 2011

hi dave,

you are completely right and correct. questions are totally same as you write.

one my friend last week took the exam as he said, try to know all tickets from networktut.com and also D&D an mcq also from networktut.com.

he said that if you know problems at tickets from dumps you can easily find the problem in the real exam by using show, trace, ping commands.

  • Dec 14, 2011
  • Dave
  • Hong Kong
  • Dec 14, 2011

Ahmad from Turkey

Thx a lot bro for your kind advice and info.

One of my frd did the Troubleshoot exam last Sept 2010 and he said all the Question are asking the same thing and we have find by ourselves where is the fault, he said that all the Questions were asking :

The implementation group has been using the test bed to do a 'proof-of-concept' that requires both Client1 and Client2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.

So there is no clue where is the fault from the Question, we have do use the Show commands on every ticket to find the fault..is this correct seems kind of hard and looks like we have to memorise the 13 tickets from the DUMP by Heart.

Anyone can give some ideas or those who has taken the exam pls share with us.

Thx a lot,
Dave

  • Dec 14, 2011
  • ahmad
  • Turkey
  • Dec 14, 2011

Dave,

go to youtube.com and,

watch the videos of Kevin Wallace, Bull's eye Tshoot strategies

very helpful strategies for the candidates.

  • Dec 14, 2011
  • ahmad
  • Turkey
  • Dec 14, 2011

hi dave,

question in every ticket start with "Client 1 is able to ping 10.1.1.2 but not 10.1.1.1." and does not tell you about anything about the problem or any clue about it.

only hsrp and ipv6 ticket questions have this clues in the questions.

all other tickets start with same question "Client 1 is able to ping 10.1.1.2 but not 10.1.1.1."

and you have to find out where is the problem by yourself.

but do not afraid of that.

know all the issues which can cause the problem from the dumps.

and start with the client check first ipconfig of the client. if client has correct ip adres then try to ping its default gateway and continue like that.

if any ping gives fail ok stop there and check that device which ping does not response to you.

believe me this exam is not as much as scary like people talk about.

  • Dec 14, 2011
  • Dave
  • Hong Kong
  • Dec 14, 2011

Hi Everyone,

Can anyone please kindly help me:

I want to know that in the Exam are the Questions asked the same as per the DUMPS (I mean the state of the Question) for the 13 tickets, for example:

Troubleshooting Ticket 1

QUESTION NO: 1
Following ticket consists of a problem description and existing configuration on the
device.

Trouble Ticket Statement:
Client 1 is able to ping 10.1.1.2 but not 10.1.1.1. Initial troubleshooting shows that
R1 does not have any OSPF neighbors or any OSPF routes


Troubleshooting Ticket 2

QUESTION NO: 1
Following ticket consists of a problem description and existing configuration on the
device.

Trouble Ticket Statement
HSRP has been configured between DSW1 and DSW2. DSW1 is configured to be
active router but it never becomes active even though the HSRP communication
between DSW1 and DSW2 is working.
----------------------------------------------------------------------------

My point here is that in the Question 1 they say that "R1 does not have any OSPF neighbors or any OSPF routes" so if they ask like this we already know the issue is OSPF.

Sorry, I am confused, can anyone pls kindly help me.

Dave

  • Dec 14, 2011
  • King
  • Singapore
  • Dec 09, 2011

Yes, it stills valid.100%%%%. thank you~ I passed today!!

  • Dec 09, 2011
  • Bilal Jaber Al-Masri
  • Saudi Arabia
  • Nov 27, 2011

Today, I have passed TSHOOT with full mark Alhamdulleah (thanks for GOD). All the dumps are valid.

13 TT (EIGRP AS ticket is not in the exam).

All 13 TT is the same.

I prefer to return back to www.networktut.com (it is containing the last TSHOOT tickets).

  • Nov 27, 2011
  • Hamish
  • United Kingdom
  • Nov 25, 2011

According to networktut, the exam was updated on 20th November - can anyone confirm this???? If so - can we have the latest exam dump please??? :)

  • Nov 25, 2011
  • bilal Al-Masri
  • Saudi Arabia
  • Nov 25, 2011

@Bava
I am going to take the exam on 27 of Nov is this dump valid?

  • Nov 25, 2011

Add Comments

Only Registered Members Can Download VCE Files or View Training Courses

Please fill out your email address below in order to Download VCE files or view Training Courses. Registration is Free and Easy - you simply need to provide an email address.

  • Trusted By 1.2M IT Certification Candidates Every Month
  • VCE Files Simulate Real Exam Environment
  • Instant Download After Registration.
A confirmation link will be sent to this email address to verify your login.
Already Member? Click Here to Login

Log into your ExamCollection Account

Please Log In to download VCE file or view Training Course

Please provide a correct E-mail address

Please provide your Password (min. 6 characters)

Only registered Examcollection.com members can download vce files or view training courses.

Registration is free and easy - just provide your E-mail address. Click Here to Register

SPECIAL OFFER: GET 10% OFF

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |