Act now and download your Cisco 200-310 test today! Do not waste time for the worthless Cisco 200-310 tutorials. Download Leading Cisco Designing for Cisco Internetwork Solutions exam with real questions and answers and begin to learn Cisco 200-310 with a classic professional.
Q1. What part of the network does a top-down network design focus on for solution development?
A. presentation
B. hardware
C. session
D. application
E. data link
F. transport
Answer: D
Q2. Which two mechanisms are used by distance vector protocols to prevent routing loops? (Choose two.)
A. split horizon
B. route summarization
C. route poisoning
D. tuned timers
Answer: A,C
Q3. By default, how does EIGRP's metric differ from OSPF?
A. hops
B. cost
C. bandwidth
D. delay
Answer: D
Q4. Which model of ISR is utilized for the teleworker design profile? A. Cisco 1900 Series
B. Cisco 1800 Series
C. Cisco 800 Series
D. Cisco 500 Series
Answer: C
Q5. An organization needs a WAN Transport technology that meets these criteria:
. has a low initial cost
. provides low-to-medium BW
. has medium-to-high latency and jitter
Which technology should the organization use?
A. DSL
B. X.25
C. ISDN
D. wireless
E. analog modem
Answer: A
Q6. Refer to the exhibit.
Which three modules would typically utilize public IPv4 addressing? (Choose three.)
A. Access
B. Distribution
C. Core
D. Data Center
E. E-Commerce
F. Internet Connectivity
G. Remote Access/VPN
H. WAN/MAN
I. Branch
J. Branch Data Center
Answer: E,F,G
Q7. Which two statements about designing the Data Center Access layer are correct? (Choose two.)
A. Multiport NIC servers should each have their own IP address.
B. Layer 3 connectivity should never be used in the access layer.
C. Layer 2 connectivity is primarily implemented in the access layer.
D. Multiport NIC servers should never be used in the access layer.
E. Layer 2 clustering implementation requires servers to be Layer 2 adjacent.
Answer: C,E
Explanation:
User access is primarily layer 2 in nature, layer 2 clustering is possible only in layer 2 Here is the Explanation: from the Cisco press CCDA certification guide Figure 4-8. Enterprise Data Center Infrastructure Overview
Defining the DC Access Layer
The data center access layer’s main purpose is to provide Layer 2 and Layer 3 physical port density for various servers in the data center. In addition, data center access layer switches provide high-performance, low-latency switching and can support a mix of oversubscription requirements. Both Layer 2 and Layer 3 access (also called routed access) designs are available, but most data center access layers are built using Layer 2 connectivity. The Layer 2 access design uses VLAN trunks upstream, which allows data center aggregation services to be shared across the same VLAN and across multiple switches. Other advantages of Layer 2 access are support for NIC teaming and server clustering that requires network connections to be Layer 2 adjacent or on the same VLAN with one another.
CCDA 640-864 Official Certification Guide Fourth Edition, Chapter 4
Q8. Which two methods are used to reduce the mesh links required between iBGP peers in the same AS? (Choose two.)
A. community
B. router reflectors
C. local preference
D. confederations
E. atomic aggregate
F. MED
Answer: B,D
Q9. Which protocol is used to reserve bandwidth for the transport of a particular application data flow across the network?
A. cRTP
B. IEEE 802.1P
C. RSVP
D. LFI
E. Auto QOS
Answer: C
Explanation:
RSVP Signaling protocol that enables end stations or applications to obtain guaranteed bandwidth and low delays for their data flows.
Q10. Which three service categories are supported by an ISR? (Choose three.)
A. voice
B. security
C. data
D. Internet
E. storage
F. satellite
Answer: A,B,C
To know more about the 200-310, click here.