Exam Code: 200-310 (Practice Exam Latest Test Questions VCE PDF)
Exam Name: Designing for Cisco Internetwork Solutions
Certification Provider: Cisco
Free Today! Guaranteed Training- Pass 200-310 Exam.
Q131. Your company's Cisco routers are operating with EIGRP. You need to join networks with an acquisition's heterogeneous routers at 3 sites, operating with EIGRP and OSPF. Which describes the best practice for routing protocol deployment?
A. Apply OSPF throughout both networks
B. Apply one-way redistribution exclusively at each location
C. Apply two-way redistribution exclusively at each location
D. Apply two-way redistribution at each location with a route filter at only one location
E. Apply two-way redistribution at each location with a route filter at each location
F. Apply EIGRP with the same autonomous system throughout both networks
Answer: E
Explanation: Without filters there is possibility of routing loops.
Link:
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009487e.shtml
Q132. What is the primary advantage of implementing a wireless LAN controller in a wireless LAN design?
A. roaming between APs
B. RADIUS user authentication
C. radio resource management
D. accelerated data transfer
Answer: C
Q133. DRAG DROP
Answer:
Q134. You have a campus network that consists of only Cisco devices. You have been tasked to discover the device platforms, the IOS versions, and an IP address of each device to map the network. Which proprietary protocol will assist you with this task?
A. SNMP
B. TCP
C. CDP
D. ICMP
E. LLDP
Answer: C
Q135. DRAG DROP
Answer:
Q136. By default, how does EIGRP's metric differ from OSPF?
A. hops
B. cost
C. bandwidth
D. delay
Answer: D
Q137. An organization is deciding what routing protocol to use throughout their network. What must be considered if routing is to be performed at the access layer?
A. reduced scalability of the network when introducing a large number of switch blocks into the routing table
B. centralized management of access control lists at the distribution layer
C. reliability when implementing routing over spanning-tree at the access layer
D. performance differences between core, distribution and access layer equipment
Answer: D
Q138. A campus network needs end-to-end QoS tools to manage traffic and ensure voice quality. Which three types of QoS tools are needed? (Choose three.)
A. interface queuing and scheduling
B. congestion management
C. compression and fragmentation
D. bandwidth provisioning
E. traffic classification
F. buffer management
Answer: A,D,E
Q139. During which phase of the PPDIOO model would you conduct interviews with supporting staff to develop and propose a viable solution?
A. Prepare
B. Plan
C. Design
D. Implement
E. Operate
F. Optimize
Answer: A
Explanation:
Prepare Phase The Prepare phase establishes organization and business requirements, develops a network strategy, and proposes a high-level conceptual architecture to support the strategy. Technologies that support the architecture are identified. This phase creates a business case to establish a financial justification for a network strategy.
Q140. Which consideration is the most important for the network designer when considering IP routing?
A. convergence
B. scalability
C. on-demand routing
D. redistribution
Answer: A
To know more about the 200-310, click here.