Want to know Exambible ccda 200 310 Exam practice test features? Want to lear more about Cisco Designing for Cisco Internetwork Solutions certification experience? Study High quality Cisco 200 310 dumps answers to Latest ccda 200 310 pdf questions at Exambible. Gat a success with an absolute guarantee to pass Cisco ccda 200 310 official cert guide (Designing for Cisco Internetwork Solutions) test on your first attempt.
Q81. Which type of area should you use in an enterprise OSPF deployment if you want to prevent propagation of type 5 LSAs but still allow the redistribution of external routes?
A. stub
B. totally stubby
C. backbone
D. NSSA
E. virtual link
Answer: D
Q82. Refer to the exhibit.
Which three modules would typically utilize public IPv4 addressing? (Choose three.)
A. Access
B. Distribution
C. Core
D. Data Center
E. E-Commerce
F. Internet Connectivity
G. Remote Access/VPN
H. WAN/MAN
I. Branch
J. Branch Data Center
Answer: E,F,G
Q83. What network virtualization technology can be leveraged within the data center to reduce the number of physical devices?
A. VLANs
B. VPLS
C. VDC
D. VSS
Answer: C
Q84. What two access point modes support the transmission of user traffic over a LWAPP/CAPWAP tunnel? (Choose two.)
A. local
B. H-REAP
C. rogue detector
D. monitor
E. sniffer
F. standalone
Answer: A,B
Q85. Which three types of WAN topologies can be deployed in the Service Provider Module? (Choose three.)
A. ring
B. star
C. full mesh
D. core/edge
E. collapsed core
F. partial mesh
Answer: B,C,F
Q86. Which interior routing protocol has the most preferable administrative distance by default?
A. RIP
B. OSPF
C. EIGRP
D. BGP
E. IS-IS
Answer: C
Q87. What is the maximum number of groups that is supported by GLBP?
A. 64
B. 256
C. 512
D. 1024
Answer: D
Q88. You are tasked with designing a new branch office that will support 75 users with possible expansion in the future and will need a highly available network. Which of the branch design profiles should be implemented?
A. large branch design
B. medium branch design
C. teleworker design
D. small branch design
Answer: B
Explanation:
Medium Branch Design The medium branch design is recommended for branch offices of 50 to 100 users, which is similar to the small branch but with an additional access router in the WAN edge (slightly larger) allowing for redundancy services. Typically, two 2921 or 2951 routers are used to support the WAN, and separate access switches are used to provide LAN connectivity.
Q89. Which routing protocol classification should you use when full topology information is needed?
A. link-state
B. distance vector
C. stateful
D. path vector
Answer: A
Q90. Cisco Identity-Based Networking Services relies heavily on the 802.1X protocol. Which other authentication solution is used hand-in-hand with 802.1X to authenticate users for network access?
A. RADIUS
B. LEAP
C. IPsec
D. TACACS
E. ISAKMP
Answer: A
Explanation:
Cisco Identity-Based Network Services The Cisco Identity-Based Network Services solution is a way to authenticate host access based on policy for admission to the network. IBNS supports identity authentication, dynamic provisioning of VLANs on a per-user basis, guest VLANs, and 802.1X with port security.
The 802.1 X protocol is a standards-based protocol for authenticating network clients by permitting or denying access to the network. The 802.1 X protocol operates between the end-user client seeking access and an Ethernet switch or wireless access point (AP) providing the connection to the network. In 802.1 X terminology, clients are called supplicants, and switches and APs are called authenticates. A back-end RADIUS server such as a Cisco Access Control Server (ACS) provides the user account database used to apply authentication and authorization. With an IBNS solution, the host uses 802.IX and Extensible Authentication Protocol over LANs (EAPoL) to send the credentials and initiate a session to the network. After the host and switch establish LAN connectivity, username and password credentials are requested. The client host then sends the credentials to the switch, which forwards them to the RADIUS ACS. The RADIUS ACS performs a lookup on the username and password to determine the credentials' validity. If the username and password are correct, an accept message is sent to the switch or AP to allow access to the client host. If the username and password are incorrect, the server sends a message to the switch or AP to block the host port. Figure 13-4 illustrates the communication flow of two hosts using 802.1X and KAPoL with the switch, AP, and back-end RADIUS server.
To know more about the 200-310, click here.