Pass Your Cisco 640-802 Exam Easy!

Get 100% Real Exam Questions, Accurate & Verified Answers By IT Experts

Fast Updates & Instant Download!

Certification Exam: 640-802 (Cisco Certified Network Associate (CCNA 640-802))

Download Free 640-802 Exam Questions

Exam 640-802 - Cisco Certified Network Associate (CCNA 640-802)
Size: 22.55 MB
Posted Date: Thursday, January 26, 2012
# of downloads: 16
Free Download: This file is outdated. Browse other 640-802 VCE Files
Exam
640-802 - Cisco Certified Network Associate (CCNA 640-802)
Size
22.55 MB
Posted Date
Thursday, January 26, 2012
# of downloads
16
Free Download
This file is outdated. Browse other 640-802 VCE Files
Comments
* The most recent comment are at the top
  • Jason
  • United States
  • Jul 11, 2012

Are the simulators on 9tut.com all the possible simulators for the exam?
I only count 10 on the 9tut.com website
Thanks

  • Jul 11, 2012
  • RT
  • Australia
  • Jul 11, 2012

Is this dump still valid? Or Can someone please send me latest dump? My email address is rati.tandon777@gmail.com

Thanks a lot

  • Jul 11, 2012
  • Jo
  • Namibia
  • May 26, 2012

Hi guys pls i rly need your help am thinkin to tk the exams only in August, so will all the question from 9tut be valid up to August or should I download them just 1month before?

  • May 26, 2012
  • Abdul Matin Sadiqi
  • India
  • May 03, 2012

Hi every one I passed my CCAN exam by today with score of 876 all question were from this dums only three or four new question, the simulation was the exaxct from 9tute.com with small changes with IP or name of router like this and nothing extra some simulation. but remember to work hard to read dumps it is was really difficult. you must focus on any small point and mostly have logical knowledge. the answer selection is changing up or down and so on
I rellay had expert Trainer he has relly knowledge of teaching thank you Mr, Sudhir Kumar in Delhi

thanks god

  • May 03, 2012
  • thinh
  • Vietnam
  • Apr 24, 2012

This dump not valid 100% . Should study on 615qs . I passed yesterday . Sim : EIGRP same all , ACL2 same all , VTP change all , about Sims you have to understand .

  • Apr 24, 2012
  • raphael
  • Austria
  • Apr 23, 2012

hey!

could anybody tell me if the sims are "packet tracer sims", where you can use the auto-completion, or do i have to know ALL commands by heart??

thanks!

  • Apr 23, 2012
  • yorkshire
  • United Kingdom
  • Apr 11, 2012

valid dump.

  • Apr 11, 2012
  • yorkshire
  • United Kingdom
  • Apr 11, 2012

This dump is valid. Sat my exam today.
Sim I got are VTP, EIGRP and ACL2. About 4 to 5 questions different.

  • Apr 11, 2012
  • Sohail
  • Pakistan
  • Apr 10, 2012

pls tell me this dumb is valid or not ?????? becoz some pppl saying now its not valid anymore?

  • Apr 10, 2012
  • loga
  • India
  • Apr 04, 2012

Started to study .. 10 days to go..

  • Apr 04, 2012
  • Moustafa
  • Kuwait
  • Mar 31, 2012

this dump is valid 80% i passed today with 947/1000
may be there is between 5 - 8 new questions
take care and study well
sims were acl2, vtp , eigrp
all the same from 9tut
but the vtp questions are 5 but one of them was about the high configuration revision and the answers were changed
and the swich x3 was higher revision from the sw1
so take care and study well, try to understand the concepts , don't just momorize the answers because at cisco exam you cant make revise for you answers, there is just one button Next, and there is no button back
so take care and study well
i wish for you the best of luck

  • Mar 31, 2012
  • Muhammad Riaz
  • Pakistan
  • Mar 27, 2012

MAX bro
u r always more thn welcum

  • Mar 27, 2012
  • Max
  • Canada
  • Mar 27, 2012

@Riaz Khan
whats upppp bro
thx a lot for this detailed info. I tottaly got it after your explanation. I was waiting for smth. much more difficult than those LABS from 9tut , that is why i was confused. Thanks a lot again. Glad that you passed. Will catch u later.......

  • Mar 27, 2012
  • indrajith
  • India
  • Mar 24, 2012

passed with 973 marks..all sims r same from 9tut with less modification...qstns from collisio 486 still very much valid...just understand (Refer to the exibit, SwX was taken out of the production network for maintenance. It will be reconnected to the Fa 0/16 port of Sw-Ac3. What happens to the network when it is reconnected and a trunk exists between the two switches?).tis is the only one qstn twisted in vtp sim..

  • Mar 24, 2012
  • yashu
  • India
  • Mar 23, 2012

Hello all,

I took my exam on 21st march and scored 973/1000.
Thanks to Jericho, collision and 9tut.

Goodluck to all

Caioo!!!

  • Mar 23, 2012
  • sajjad
  • Pakistan
  • Mar 22, 2012

A Complete procedure for taking CCNA EXAM (how to register, fee, discount, voucher, dumps, updates) visit..facebook.com/ccnafasttrack

  • Mar 22, 2012
  • Riaz Khan
  • Pakistan
  • Mar 22, 2012

oh my MAX bro
u r truly confusd my bro..see in 9tut.com forget about the right side, i knw there are labz, drag and drop qustn and much more... but listn man just concentrate on these things..
1) VTP this qustn is on the top of all qustns on the home page of 9tut.com clck on READ MORE of that specfic qustn under it..now there will be 9 qustnz for that specific VTP snrio..and in exam u will find the same qustnz having same mthd but may be with different answrz so u must have to configure it there....now click on this link there on that page http://www.9tut.com/download/9tut.com_CCNA_vtp_sim.pka ..to download that snrio ...u must have pakt tracer installed in ur pc b4 for that..the number of qustns in exam with be 5 and is called as HOT SPOTS...
2)now come to the home page again of 9tut.com
under the VTP qustn there is access-list sim 2..clck on READ MORE under it.and now u will see the configrtn of one access-list lab and if u go down there r 4 more relatve qustns for that same snrio..now click there on this link to download that specfic snrio on ur systm.. http://www.9tut.com/access-list-tutorial, for this u must have packet tracer installed in ur pc..
3) now from here go directly to the EIGRP lab
and do the same thng again...ohhhhhh brooooooo
if u r still confuse find me with riazmkd@yahoo.com on facebook i will help u online with these thngs ....and im not gona take any money for this so dont wory hahahahahahahahaa
tc bro

  • Mar 22, 2012
  • srilak
  • Sri Lanka
  • Mar 21, 2012

I passed the CCNA exam today with 907 marks. I have used this dump and colliso dump. Most of the questions are same.Only have 2 or 3 new questions and labs are ACL2, VTP and EIGRP same as 9tut. ACL 2 is bit different. Thanks jericho, colliso and 9tut.

  • Mar 21, 2012
  • Max
  • Canada
  • Mar 21, 2012

@Riaz Khan
thx my man. I am just confused. I see what u mean. There is only 11 labs on the home page..is that all i have to know ?????? What is all that stuff on the right like CCNA Basic Questions
CCNA Basic Questions 2
CCNA Cisco IOS Questions
etc...

  • Mar 21, 2012
  • Riaz Khan
  • Pakistan
  • Mar 20, 2012

MAX bro it is on the home page bro .
www.9tut.com and u will find the labz there .futhr more u will see vtp access-list and eigrp lab too..to go to there code e.g vtp or eigrp click on read more,,,,and there will be a link to download that specific lab,,,,,for this download u must have packt tracer install in ur pc...the lab wil automatically be opened n packt tracer which is already configured and u have do is that to remove the faults or to permit or deny in access-list
gudluck bro

  • Mar 20, 2012
  • Max
  • Canada
  • Mar 20, 2012

@Mohand i would say its the second one. Looks like RSTP has an edges ports which are off and forwarding which are on. 2 states only....

  • Mar 20, 2012
  • Max
  • Canada
  • Mar 20, 2012

Hey Guys. Can anybody give me an exact link from 9tut LABS, because i do not understand where to go from the HOME page.

  • Mar 20, 2012
  • Riaz Khan
  • Pakistan
  • Mar 19, 2012

salam to alllllllll guys
sorry for my late update but i take my paper on 18/3/2010
Ahhhhh...!!! with the grace of ALLAH i got 947..it was a hard experience u know.but i must say its not that much difficult as we think before exam.everythng was frm dumbz..Lab were EIGRP,ACL2,and VTP..i would refer collisio 486 and jerricho 576..and thnk u so mch to 9tut.com yaaar.labz are all those which we find n 9tut.com...u must have to stdy both collisio and jerricho guyz plz cz there are different questions b/w both of them...
frthr i would like to share my labz with u..
dont memorize the vtp labs..u dont have to just click on the radio button there 1st configure it and thn clck the button..cz i got all my qustn not with the same answer as shown in the 9tut.com..but the qustn was the same..configure it and bangggggg.
the i got EIGRP same as 9tut.com with 112 AD on Router 1 and 22 on Router 2...
then in access-list
- Host C should be able to use a web browser(HTTP)to access the Finance Web Server
- Other types of access from host C to the Finance Web Server should be blocked
- All access from hosts in the Core or local LAN to the Finance Web Server should be blocked
- All hosts in the Core and local LAN should be able to access the Public Web Server *
best of luck guyzzzzz
i learn many thngs from exam collection thats why im sharing my ideas n deal.
best of luck and don,t worry taking the paper is the key mind it...
if anyone had a problem find me on facebook with riazmkd@yahoo.com if u need help
ALLAH FAFIZ

  • Mar 19, 2012
  • rigan
  • Bangladesh
  • Mar 15, 2012

Dear All,

I am going to take exam on March,19 ,2012. Plz need a help & suggestion about
dump and Lab..
Waiting for reply

rigan12@yahoo.com

  • Mar 15, 2012
  • ihsan
  • Pakistan
  • Mar 15, 2012

hello i just pass the ccna examz and the damz are valid

  • Mar 15, 2012
  • Mohand
  • Egypt
  • Mar 15, 2012

Need Help :
Which two states are the port states when RSTP has converged? (choose two)
Answer1:
blocking
forwarding

or

Answer 2:
disabled
forwarding

Note: i searched in some web sites says answer 1 some says 2 iam so confused :$

  • Mar 15, 2012
  • facebook.com/ccnafasttrack
  • Pakistan
  • Mar 13, 2012

CCNA Exam Best Package Rs.5500 voucher + 500 Exam prep (www.facebook.com/ccnafasttrack)

  • Mar 13, 2012
  • Nguyễn văn ninh
  • Vietnam
  • Mar 12, 2012

pass to day with 933 point. haha this still valid 100%

  • Mar 12, 2012
  • MD.salem
  • Saudi Arabia
  • Mar 12, 2012

who will take exam in April if any update write at this page thank u for everyone
good luck for all

  • Mar 12, 2012
  • Fayez
  • Saudi Arabia
  • Mar 10, 2012

Passed Today : 933/1000
this dump is still valid 100%
there are about 5 new Quistions but it is easy.
and the Labs was:
EIGRP, VTP:Five Quistion,ACL 2 from 9tut.com:

  • Mar 10, 2012
  • Saadii
  • Pakistan
  • Mar 10, 2012

Hello Guys. I'm giving my CCNA exam at the end of this month. started my preparation from Collisio & Jericho dumps. Lets hope for the best. Fingers crossed.

  • Mar 10, 2012
  • Rashid
  • India
  • Mar 07, 2012

Thank u Warry.. :)

  • Mar 07, 2012
  • steph
  • France
  • Mar 06, 2012

@ Kanchan Thank you for your explanation.

  • Mar 06, 2012
  • kanchan
  • India
  • Mar 06, 2012

@ Steph: there is a demo of exam which helps u understand the platform and nature of exam which you can check out before exam.

  • Mar 06, 2012
  • kanchan
  • India
  • Mar 06, 2012

Hello ,
Passed today with 947
Dump is 100% valid
Sim: ACL2, VTP & EIGRP
Thank you so much
you Rock!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  • Mar 06, 2012
  • steph
  • France
  • Mar 06, 2012

Hello Warry, what exactly are those 30 minutes or so for the beginning tutorials for ?
Is it part of the exam too ?
Thanks

  • Mar 06, 2012
  • Warry
  • India
  • Mar 06, 2012

Hey Rashid - 48 questions - 110minutes and seperate 30 minutes or so for the beginning tutorials.
825 is pass mark out of 1000
3 Sim questions --> under VTP - you will get 5 sub division questions.
exam fee is 295$.

  • Mar 06, 2012
  • Warry
  • India
  • Mar 06, 2012

I studied Jericho 576 and Collisio 486 - Cisco Acme!
and 9tut.com --> acl 2,eigrp 112, vtp
i scored 933/1000.
Just study Acme Dumps by jericho and collisio alone :)
Thanks guys!! will never forget you :)

  • Mar 06, 2012
  • Rashid
  • India
  • Mar 05, 2012

How many questions would b dere 4 de xam???
sim??
hows de marking scheme??? pass mark??

  • Mar 05, 2012
  • aaii60
  • Jordan
  • Mar 04, 2012

no there are just drag and drop questions. no fill in the blanks

  • Mar 04, 2012
  • mangala
  • India
  • Mar 03, 2012

http://www.cisco.com/web/learning/le3/learning_certification_exam_tutorial.html

Are there any Fill in the blank questions in the CCNA 640-802 exam ? Some one please help...

  • Mar 03, 2012
  • only me
  • United Kingdom
  • Mar 03, 2012

Passed exam,,,,,thx Jericho & Colliso. sims eigrp change AS from 22 to 212 and remove bogus network , acl2(host A) same as 9tut and vtp 5 questions. Start CCNA security next week GL all future takers

  • Mar 03, 2012
  • aaii60
  • Jordan
  • Mar 03, 2012

Just passed my CCNA exam, this dump is still valid, only one-2 new questions and they are easy, i got a 973, simulations are ACL 2, VTP, and a new EIGRP from 9tut.. good luck to whoever is next

  • Mar 03, 2012
  • Dan
  • Malaysia
  • Mar 02, 2012

Passed CCNA today 894/1000, referred Jericho/Collisio, Simulations from 9tut, EIGRP different diagram with different IPs, VTP sw-AC3 is the VTP server, ACL-2 is just as the same from 9tut. Thanks to Jericho, Collisio and 9tut to make it happen.

  • Mar 02, 2012
  • nanggroe
  • Singapore
  • Mar 01, 2012

@Gabby; thank you, I'm planning to take CCDA 640-864. What do you think of CCDA? is it good? Or, should I take another exam?

  • Mar 01, 2012
  • Gabby
  • India
  • Feb 29, 2012

How to prepare for CCNA Exam:

This information for all those who are going to plan for CCNA exam.

1)Study Todd Lammle CCSI book for 15-20 days topic needs to be covered under them is

a) Ethernet techonology
b)OSI layer
c)IP addressing summerisation VLSM;includes both IPv4 & IPv6
d)Command-line for routers like password login etc.
e)Static IP route ,Distance Vecor Protocol,RIP v1 & RIP v2
f)OSPF & EIGRP configuration
g)STP & VLANS
h)ACL & NAT
i)Wireless techonology

Once you complete studying the book.

2)Study Jericho dumps & do revision with collision dump
3)Praticse 4 simulation i.e ACL2 , EIGRP , VTP & NAT from www.9tut.com

  • Feb 29, 2012
  • Gabby
  • India
  • Feb 29, 2012

@only me : all the best I know u'll definately win the race!!!!

@nanggore:congrats whats ur next plan?

  • Feb 29, 2012
  • nanggroe
  • Singapore
  • Feb 29, 2012

I've just passed the exam, today. This dump is valid. 48 questions. Just 1 new question. Sims are VTP, ACL 2, and EIGRP on 9tut.com.

Thank youuuu.

  • Feb 29, 2012
  • only me
  • United Kingdom
  • Feb 29, 2012

@Gabby networking Associate
a big congrats mate .I sit mine today

  • Feb 29, 2012
  • karthik
  • India
  • Feb 28, 2012

Hi all,
I heard 9tut is the best for Simulations. I couldn't able to download it.Please provide me the link to download the simulations.

  • Feb 28, 2012
  • Gabby
  • India
  • Feb 28, 2012

I cleared my exam with ease scored 947/1000.
Jericho is the best to study .

Simulation:
ACL2 : Same Question Only Ip Change
Eigrp : AS number was 22 to change to12 & IP was differnt where I had to enter to network Ip 192.168.24.0
192.168.55.0 to form neighborship
VTP 5 question

  • Feb 28, 2012
  • Gabby
  • India
  • Feb 28, 2012

Well In another 1 hours I am going to appear My CCNA exam guys pray for me..

  • Feb 28, 2012
  • Zubair
  • Pakistan
  • Feb 28, 2012

This is valid. I'd recommend both Jericho and Collisio. Make you prepare the ACL2, VTP, EIGRP labs.

  • Feb 28, 2012
  • Gabby
  • India
  • Feb 27, 2012

Hi all due technical reason wasnt able to give the exam today :(
Rescheduled for tomorrow. What a shit need to extend one more day

  • Feb 27, 2012
  • Mohamed Farook
  • India
  • Feb 27, 2012

Today I passed with 881 marks.
Thanks to Almighty ALLAH

Total Questions 48 (including 3 simulations- VTP,EIGRP & ACL2). All 45 questions are from this dump. And simulations from 9tut.com. I made mistakes in WAN section.
Thanks for this Dump.

  • Feb 27, 2012
  • Rajkumar
  • India
  • Feb 27, 2012

I passed CCNA on 25 Feb. I got 881/1000. I studied Jericho, collisio & 9tut.
The labs are EIGRP 212, ACL 2, VTP from 9tut. Thanks for uploading and thank you for everyone. All the best.

  • Feb 27, 2012
  • Mohamed Farook
  • China
  • Feb 27, 2012

Today I passed with 881 marks.
Thanks to Almighty ALLAH

Total Questions 48 (including 3 simulations- VTP,EIGRP & ACL2). All 45 questions are from this dump. And simulations from 9tut.com. I made mistakes in WAN section.
Thanks for this Dump.

  • Feb 27, 2012
  • Anand
  • United Arab Emirates
  • Feb 27, 2012

Hi all.I passed the exam yesterday 973. Thanks to Jericho. I went through collisio too. Found 2 question from collisio which were not found in this one. 3 Simulations (EIGRP, VTP and ACL2) were the ones. Please refer 9tut for simulations. Also dont forget to practise the modifications. Its important specially for ACL. Thanks to all for the support and comments related to the exams. For all who are appearing for the exams, take it easy. All the Best

  • Feb 27, 2012
  • Gabby
  • India
  • Feb 26, 2012

Hello Everyone I am going to Give My exam today please pray for me .
I will keep U'll posted related what I will appear in my exam.

  • Feb 26, 2012
  • Amr
  • Egypt
  • Feb 26, 2012

I passed in the exam yesterday The dump is valid and very few new questions may be 2 or 3 questions and a few changes in VTP question and Acl2
EIGRP is the same
Thanks for examcollection and 9tut

  • Feb 26, 2012
  • jero
  • Belgium
  • Feb 26, 2012

very good dump: all questions are working, interactivity works, answers are all correct. (which can't be said of the dharani dump that contains a lot of faulty answers)
Tomorrow exam, let's see how we do.

  • Feb 26, 2012
  • Irini
  • Egypt
  • Feb 25, 2012

Thank you :) I passed today my CCNA exam . this dump is totally valid and VTP, ACL2, EIGRP as simulations .

  • Feb 25, 2012
  • Samuel
  • Nigeria
  • Feb 25, 2012

Tnks a bunch mhan Jericho, did ma ccna today nd scored 920, EIGRP, ACL2, nd VTP for simulaltions

  • Feb 25, 2012
  • sam
  • Feb 24, 2012

By the Grace of Allah today i have passed CCNA for 986/1000 . thumbs up for jericho collisio and specially 9tut.
New question was added
----->whether ip nat inside applied on each sub interface of router connected to the lan or on the main interface.
------>some people are spreading rumour that "in the EIGRP Lab Central router and all other router are not connected to the ISP router and the solution will be to use NAT to connect the EIGRP routers to ISP "
NOOO000. i also had EIGRP LAB and central router and all other routers of EIGRP 212 were not connecting the ISP but they said in the Question that All other routers are connecting the ISP. then i just concentrated on the EIGRP not on the connection of EIGRP routers to ISP.and Never Ever use NAT in the EIGRP LAB just focus on the EIGRP configuration as discussed in the 9tut.

  • Feb 24, 2012
  • Dennis
  • India
  • Feb 24, 2012

sorry to delay to upload my comments.
I pass ccna exam on 21 Feb from Jericho, collisio 486q and 9tut.com. My score is 933 and the labs are accesslist2, vtp and eigrp lab as number 12.so you should all learn and pratise the questions on this site. Heaps of thanks to 9 tut.com and all my good friends...
I think Jericho.576q is better than collisio 486q.
it is

  • Feb 24, 2012
  • suresh
  • India
  • Feb 24, 2012

Great discussion Prabha.on Port security.

This kind of discussion will actually help to clear concept and exam as well.
So keep it up guys.

  • Feb 24, 2012
  • LatinAmerican
  • United States
  • Feb 24, 2012

The best dump ever!! I cleared CCNA with 973 /1000. Thanks to uploader.

  • Feb 24, 2012
  • sam from pak
  • Feb 23, 2012

i have studied jericho. there are some mistakes in question.over all nice dumps

  • Feb 23, 2012
  • sam from pak
  • Feb 23, 2012

@prabha
yes "A" is correct :)

  • Feb 23, 2012
  • Prabha
  • India
  • Feb 23, 2012

This is a tricky one - at first it kind've tricked me too, although now the answer is more clear.

What is the valid reason for a switch to deny port access to new devices when port security is enabled

A. The denied MAC address have already been learned or configured on another secure interface in the same VLAN. -> I've tested it that if one MAC is already learned or configured on one port, it cannot be learned or configured on another port => this is the right answer
B. The denied MAC address are statically configured on the port. -> only the secure MAC addresses are configured on the port
C. The minimum MAC threshold has been reached. -> not a valid reason; maybe if the maximum threshold has been reached (this refers to the maximum number of MAC addresses that are allowed to pass that port)
D. The absolute aging time for denied MAC address have expired. -> the aging times determines how long the secure MAC addresses that have been learned dynamically should stay; when the aging time expires, the switch is able to learn new secure MAC addresses.

http://certcollection.org/forum/topic/40511-switching-question/

  • Feb 23, 2012
  • Prabha
  • India
  • Feb 23, 2012

@sam - so u r also telling "A" is right.....

  • Feb 23, 2012
  • sam
  • Feb 23, 2012

@jericho, parabha and Don

What is valid reason for a switch to deny port access to new devices when port security is enabled?

A. The denied MAC addresses have already been learned or configured on another secure interface in the same VLAN.
B. The denied MAC address are statically configured on the port.
C. The minimum MAC threshold has been reached.
D. The absolute aging times for the denied MAC addresses have expired.


Answer: A

Explanation

A security violation occurs in either of these situations:

* When the maximum number of secure MAC addresses is reached on a secure port and the source MAC address of the ingress traffic is different from any of the identified secure MAC addresses, port security applies the configured violation mode.

* If traffic with a secure MAC address that is configured or learned on one secure port attempts to access another secure port in the same VLAN, applies the configured violation mode.

From the second statement we can figure out A is the correct answer. But for your information we will discuss other answers as well.

Answer B is not correct because we can't configured which MAC address will be denied. We can only configure which MAC is allowed.

We can only configure the maximum MAC threshold, not the minimum threshold -> C is not correct.

The aging times are only configured for allowed MAC addresses, not for denied MAC -> D is correct.

For your information about aging time:

When the aging type is configured with the absolute keyword, all the dynamically learned secure addresses age out when the aging time expires

This is how to configure the secure MAC address aging type on the port:

Router(config-if)# switchport port-security aging type absolute

and configure the aging time (aging time = 120 minutes)

Router(config-if)# switchport port-security aging time 120

When this command is used, all the dynamically learned secure addresses age out when the aging time expires

  • Feb 23, 2012
  • Prabha
  • India
  • Feb 23, 2012

thnks Jericho, Don & only me

  • Feb 23, 2012
  • Jericho
  • United States
  • Feb 23, 2012

@Prabha

If The denied MAC addresses have already been learned or configured, this device is not NEW ANYMORE. So A is wrong. This question asking for a valid reason for a NEW DEVICE. I hope this one will help

  • Feb 23, 2012
  • Don
  • United States
  • Feb 23, 2012

@Prabha
Check it out and read between the lines! What is VALID REASON for a switch TO DENY PORT ACCESS TO NEW DEVICES when port security is enabled? The question asking you is why THE SWITCH deny this NEW DEVICES if port security is enabled and give me a valid reason?????Even though you statically configure the MAC of this new devices still will deny because of the violation. Do you think If I unplugged the device that already learned and connect it again will deny that device? The trick question is already LEARNED and CONFIGURE but if you think A is a good answer, I won't force you to agree with me. I'm just answering your question because I did this already and pass.

  • Feb 23, 2012
  • Prabha
  • India
  • Feb 23, 2012

@Don & only me

please check this link also

https://learningnetwork.cisco.com/thread/21843

  • Feb 23, 2012
  • Prabha
  • India
  • Feb 23, 2012

@Don & only me

A security violation occurs in either of these situations:

* When the maximum number of secure MAC addresses is reached on a secure port and the source MAC address of the ingress traffic is different from any of the identified secure MAC addresses, port security applies the configured violation mode.

* If traffic with a secure MAC address that is configured or learned on one secure port attempts to access another secure port in the same VLAN, applies the configured violation mode.

From the second statement we can figure out A is the correct answer. But for your information we will discuss other answers as well.

Answer B is not correct because we can't configured which MAC address will be denied. We can only configure which MAC is allowed.

We can only configure the maximum MAC threshold, not the minimum threshold -> C is not correct.

The aging times are only configured for allowed MAC addresses, not for denied MAC -> D is correct.

For your information about aging time:

When the aging type is configured with the absolute keyword, all the dynamically learned secure addresses age out when the aging time expires

This is how to configure the secure MAC address aging type on the port:

http://www.9tut.com/ccna-switch-questions

  • Feb 23, 2012
  • only me
  • United Kingdom
  • Feb 23, 2012

@Prabha The answer is B because the port has already got a MAC address statically mapped to it and the new device's MAC address does not match the one in its MAC address table for that port ergo it is denied, the port would need to be re-mapped to the MAC address of the new device.hope this helps ;-)

  • Feb 23, 2012
  • Don
  • United States
  • Feb 22, 2012

@Prabha
What I mean is NEW DEVICES. This could be Server, Printer, Workstation, Switch, Router, PBX, or whatever. Those devices or end nodes has to be configured statically or else they will be denied if port-security configurations was enable. I hope you understand. That's basic CCNA 3 LAN Switching and Wireless Book.

  • Feb 22, 2012
  • Don
  • United States
  • Feb 22, 2012

@Prabha
If your answer is A then you are wrong! How would the switch denied the MAC addresses that have already been learned or configured? THIS IS A NEW SWITCH and beside this has nothing to do with VLAN. This is strictly port-security. C is a bogus answer and D is about DHCP. Is a process of elimination my friend.

  • Feb 22, 2012
  • Prabha
  • India
  • Feb 22, 2012

What is valid reason for a switch to deny port access to new devices when port security is enabled?
A. The denied MAC addresses have already been learned or configured on another secure interface in the same VLAN.
B. The denied MAC address are statically configured on the port.
C. The minimum MAC threshold has been reached.
D. The absolute aging times for the denied MAC addresses have expired.

According to this dump Answer is B
but I think correct answer is "A"

any idea?

  • Feb 22, 2012
  • Sagar from India
  • United States
  • Feb 22, 2012

I have done it today .Got 947.
Refered Jericho.
Sims were from EIGRP,ACL 2 (4 tasks with one access list) and VTP(5questions)
All the best !

  • Feb 22, 2012
  • Danial
  • Malaysia
  • Feb 21, 2012

dump is valid. Passed today, 21 feb with 973/100 marks. studied with eaglee, jericho and collisio, and simulation from 9tut. if any confusion, refer to 9tut. thanx eagle, jericho, collisio and 9tut.

  • Feb 21, 2012
  • bishnu dhakal
  • India
  • Feb 21, 2012

writing my xam on 24th. pls update ur reviews and mention any changes in simulations. thanx

  • Feb 21, 2012
  • Rasheed
  • Brazil
  • Feb 21, 2012

go to 9tut.com. after each sim. you ll see some modification subsection. the ones i had in my exam were part of those things mentioned.

  • Feb 21, 2012
  • Dolia
  • United Kingdom
  • Feb 20, 2012

Passed My CCNA today with 973 marks!!!!
My sincere advice for test taking guys.
1) Just study Jericho's dumps.probably the best of all.101% still valid and will be valid forever.cos its covering all the questions!
2) Just give a practice test with collisio's dumps after your done with jericho's
3) Just study the 11 simulations which is given in the 9tut site and practice them using packet tracer
4) Study Todd Lammle's CCNA guide.probably the best book to study subnetting!! after you complete every chapter work out the book back practice questions 20 per chapter and then take a chapter wise test with jericho's dumps
5) go and attend the test with 100% confidence as all the questions will surely come from the jericho's & collisio's dumps. Pass guarantee!!!

  • Feb 20, 2012
  • sanje
  • Sri Lanka
  • Feb 20, 2012

ACL2,EIGRP,VTP simulation have "9tut.com"

  • Feb 20, 2012
  • Fayez
  • Saudi Arabia
  • Feb 20, 2012

pls , what are the labs in ccna exam,are still VTP,Eigrp,and ACL.

  • Feb 20, 2012
  • Zubair
  • Pakistan
  • Feb 20, 2012

@Tumi, give me your email ID, i'll be happy to assist you.

  • Feb 20, 2012
  • Justin
  • United States
  • Feb 20, 2012

I think question 50 of 71 in the Switching (STP/RSTP) section has the wrong answer. What two states are the port states when RSTP has converged.
Answer listed: Disabled and Forwarding
I think it should be Blocking and Forwarding

  • Feb 20, 2012
  • only me
  • United Kingdom
  • Feb 19, 2012

@Rasheed could you expand on what the modifications were mate ave got 2 weeks until i sit my exam cheers.

  • Feb 19, 2012
  • Jericho
  • United States
  • Feb 17, 2012

@Bill

Sorry Bill, I only have this VCE file. Most of these files I used Collisio version, Certify me, Pass4sure, and other sites I researched. Then, I combined them and created this VCE file. That is why I have 576q and Collision have 486q.

  • Feb 17, 2012
  • mike
  • Saudi Arabia
  • Feb 16, 2012

hi everybody,do all questions is still valid and is it a similar theory questions+ sim
the dumps (Collisio(486) and Jericho 576q).

regards,,,

  • Feb 16, 2012
  • Rasheed
  • Nigeria
  • Feb 16, 2012

Hey, everybody! Alhamdulillah, i passed yetserday with 960/1000. I used Collisio(486) and Jericho. Thumbs up to the two of them.they did a nice job. Refer to 9tut.com for variations in sim. i had some of the modifications in my exam.
What's next.? i need a break.

  • Feb 16, 2012
  • KAR
  • Singapore
  • Feb 13, 2012

Passed CCNA today Feb.13.2012,
VTP, EIGRP and ACL2 for simulation , all other questions covered in this dumps, thanks for the upload

  • Feb 13, 2012
  • Shiva
  • India
  • Feb 12, 2012

Hi everyone I passed my CCNA exam on 10th Feb
Scored 1000/1000
Studied 9tut Labs, Jericho and Collosio dumps,
if you find any answer wrong in dumps then refer 9tut objective.

  • Feb 12, 2012
  • sam
  • Feb 12, 2012

ccna 640-802 fee is 295 $

  • Feb 12, 2012
  • lionel
  • Cameroon
  • Feb 12, 2012

pls can someone one tell em the cost of the ccna exam? i plan to take it this weekend but strange enough i dont know how much it costs!! thanks!!

  • Feb 12, 2012
  • waleed alani
  • Jordan
  • Feb 11, 2012

I passed the CCNA exam today and I got a good mark 854/1000
I just studied from the website www.examcollection.com
this website is very useful and the same questions for the real exam
Lab IGERB, ACL2 sim, VTP switching
Thanks

  • Feb 11, 2012
  • Sameer
  • India
  • Feb 11, 2012

Sorry for da delay. I passed my ccna exam yesterday
wid 960 marks.
Learn collusion and jaricos dumps.
Der are sum worng Ans please be care full.
Bcoz of dat I lost my 40 mrks.

  • Feb 11, 2012
  • Mr. Swave
  • Philippines
  • Feb 11, 2012

Passed my CCNA yesterday with score of 986/1000. My labs are: eigrp, vtp, acl2. Study materials I used are: 9tut's site, collisio's dumps, jericho's dumps. I haven't used dharani's dumps because when I first studied it, I found a lot of mistakes on the answers. Good luck to all of u who will be taking the exam.^_^

  • Feb 11, 2012
  • Tumi
  • South Africa
  • Feb 10, 2012

Hi Guys,

I am based in south Africa and work for ISP, would appriciate all the help i can get in attaining my CCNA, please guide in right direction.

I need to start from the beggining as i have no knowlegde, please help, brithers and sisters.

  • Feb 10, 2012
  • aiser
  • Pakistan
  • Feb 10, 2012

i have passed today by grace of GOD.have got 947 marks.dumps r valid.sims were VTP, EIGRP,ACL 2.lil bit change in IP in EIGRP.ACL 2 and VTP were same ass in 9tut.thanks 9tut.

  • Feb 10, 2012
  • liza
  • Kenya
  • Feb 09, 2012

Hallo,

I passed the exams, dump si valid. Sims is EIGRP, VTP/STP.SWITCHES,ACL-2 of 9tut.com

http://www.9tut.com/category/ccna-lab-sim

Thanks Jericho. This was very helpful.

  • Feb 09, 2012
  • shailendra mishra
  • India
  • Feb 08, 2012

this very usefull guide provider so i feel this is better for evry ccna student

  • Feb 08, 2012
  • Max
  • Russian Federation
  • Feb 08, 2012

passed today. 986. 1-2 new questions. acl, eigrp, vtp sim from 9tut

  • Feb 08, 2012
  • Haris
  • Pakistan
  • Feb 07, 2012

@ Thanks PATEL ! Hope you will guide me in future. Can you say me How much time taken for the validity of these dumps means in the same Month of Feb. Or till next month March. Any buddy have valid dumps material for the CCNA Exam which I given in few months. I am really thank full in this regards.

  • Feb 07, 2012
  • ayomide
  • Nigeria
  • Feb 07, 2012

wrote my exam today.dumps is ok.but i failed.pls i need d correct acl lab config .thanks.am retaking d exam

  • Feb 07, 2012
  • Halilullah
  • India
  • Feb 07, 2012

I want write CCNA exam at thsi Feb end or March !st week.. Can I know abt which dhumps is most useful, helpful for that examination...?

  • Feb 07, 2012
  • vishal
  • India
  • Feb 07, 2012

I passes the exam 4 Hrs ago. # sims Switches, Eigrp and ACL of 9tut and lot of questions from this dump. colliso and this nearly equal.

  • Feb 07, 2012
  • mnz
  • India
  • Feb 07, 2012

I have scored 960, just before 2hours, the exam was quite easy. the labs were vlan&vtp , eigrp , acl2, the vtp was the same from 9tut with no change.
eigrp concept was the same. acl2 some what tricky so go through modifications in 9tut. mcqs u can refer from acme collision and jericho and 9tut. properly go through concept of mcqs from 9tut. thanks a lot to 9tut,exam collection,jericho, shekar.

  • Feb 07, 2012
  • Max
  • Canada
  • Feb 07, 2012

@Phillip thx...

  • Feb 07, 2012
  • Kraz
  • United States
  • Feb 07, 2012

Which type of routers and switches are best to practice with,??? since some routers do not support the same commands,as which might be found on the exam..

  • Feb 07, 2012
  • PATEL PATEL
  • United States
  • Feb 06, 2012

@Haris, by the time you take the test in April or May. the entire dump will change and the questions you are doing right now won't be valid or only a few will still be good. Best bet is know the materials.

  • Feb 06, 2012
  • Haris
  • Pakistan
  • Feb 06, 2012

Bro ! fareed roshan & Aqeel Javed.
I would like to pass CCNA Exam, Plz guide me and send me the link where I download the real dumps which become the good base for pass my Exam. I will interested to given my exam in End of April & early of May. I relay thank full if any friend help me in this regards & how I sort these ackme 486q

  • Feb 06, 2012
  • saso
  • Egypt
  • Feb 06, 2012

i failed cause simultion in the exam was too hard,how can i improve myself in the simulation?

  • Feb 06, 2012
  • Phillip
  • United States
  • Feb 06, 2012

@GLEN, you have to purchase the program (microsoft cert exam) to open up all the questions. If not, you're only going to get a preview of it. The program is worth buying and I believe you have to pay the people who put there hardwork in making this software. Coming from a guy who programs myself.@MAX, this is a good practice questions. Please read the books and understand the materials and you should be fine.

  • Feb 06, 2012
  • Aqeel Javed-Pakistan
  • Pakistan
  • Feb 06, 2012

I passed my exam with 907 marks, i perpared ackme 486 dumps, nothing changed, eigrp,vtp and acl-2 labs,

best of luck to alls

  • Feb 06, 2012
  • Max
  • Canada
  • Feb 06, 2012

Thans to everyone .
Just starting my preparation .
Is this source usefull for CCNA preparation ?
Are the questions similar enought with the real ones . Thanks a lot who is doing this ........

  • Feb 06, 2012
  • renju
  • India
  • Feb 03, 2012

good dump.less fault in answers.i passed.thanks

  • Feb 03, 2012
  • robe
  • Vietnam
  • Feb 03, 2012

Passed Today With 980/1000

Labs Simulation was VTP , ACL , EIGRP

I got 53 questions , three for labs

I used this dump ((Cisco.Acme.640-802.v2011-07-09.by.Collisio.486q)) and ccnatrainingexam.com for explanation

Labs is also from ccnatrainingexam.com

Thanks everybody who helped in that dump over there

and good luck for all :)

  • Feb 03, 2012
  • D
  • Egypt
  • Feb 03, 2012

vote....good dump GREAT effort ,THnX Jericho

  • Feb 03, 2012
  • kunal
  • India
  • Feb 01, 2012

HEY GUYS I PASSED YESTERDAY BY 960 SCORE.
THE LAB WAS EIGRP,ACL2,AND VTP
pLeASE REFER COLLISIO BECAUSE SOME OF THE QUESTION
WHICH IS IN THE COLLISIO IS NOT INCLUDED IN IT AND THAT VERY QUESTION CAME
WELL THANKS JERRICHO ALSO TO PROVIDE THE VALID DUMPS THAAAANKSSSSSSSSSS ALOOOOOT

  • Feb 01, 2012
  • kunal
  • India
  • Feb 01, 2012

@TOM
sir I am wrong the answer should be A because it has the larger BID
and the the highest no. will be matched

  • Feb 01, 2012
  • Noe Pelayo
  • Mexico
  • Jan 31, 2012

This dump is valid pass mi examen yesterday with 973. sims from 9 tut.com, ACL , EIGRP AS 112 and vtp.

  • Jan 31, 2012
  • kyaw thet khine
  • Myanmar
  • Jan 31, 2012

sorry to delay to upload my comments.
I pass ccna exam on 26 Jan 2012 . The questions i encountered in the exam are
from this site 9tut.com. My score is 986 and the labs are accesslist2, vtp and eigrp lab as number 221.so you should all learn and pratise the questions on this site. Heaps of thanks to 9 tut.com

  • Jan 31, 2012
  • Tim
  • United States
  • Jan 30, 2012

@Kunal, you are doing it backwards, hence why you have the wrong answer.

  • Jan 30, 2012
  • Tim
  • United States
  • Jan 30, 2012

i missed my pass mark by 25 points. STUDY 9tut ACL, EIGRP sims. This dump is verbatim and valid.

  • Jan 30, 2012
  • kunal
  • India
  • Jan 30, 2012

dude http://postimage.org/image/hl6abehhd/
thos question is dammed wrong
the correct answer will be OPTION B

  • Jan 30, 2012
  • kunal
  • India
  • Jan 30, 2012

tomorrow i am going to give ccna hope for the best
prepared from collisio and new acme dump
did 9 tut simulation.
what is going to happen dont know
very tensed

  • Jan 30, 2012
  • Varun
  • India
  • Jan 30, 2012

Hi,
Frnds someone tell me that till what time these dumps are vallid, because I am looking to give exam in March, so pls help me to find right questions.

Thanks & Regards.

  • Jan 30, 2012
  • Willem
  • South Africa
  • Jan 30, 2012

I wrote my ICND2 on Friday, scoring 800 (Failed) after studying my ass off!
Is this dump updated? As the dumps on ICND2 is way outdated, and only got about 25% of the Qs in the exam. Please reply, as I want to rewrite next week.
Thanks in advance.

  • Jan 30, 2012
  • Jericho
  • United States
  • Jan 29, 2012

@koblat

Good luck, let us know what's up. I know Cisco modified (updated) some of their questions but if you pause and take a closer look, you'll find out the answer. Most of them are the same concept, Cisco just shuffle them a bit.

  • Jan 29, 2012
  • koblat
  • Jan 29, 2012

jericho my exam today

  • Jan 29, 2012
  • fareed roshan
  • Pakistan
  • Jan 29, 2012

hey bro itzzz vild dumzzz learn and pass i hava pass the ccna exam wil that dumzz sim vtp eigrp access-list

  • Jan 29, 2012
  • bob
  • France
  • Jan 27, 2012

verify questions where you must drag items. it detect an error although it's true

  • Jan 27, 2012
  • Jericho
  • United States
  • Jan 27, 2012

@tolu,
Don't worry my friend, I failed in my first try too. Take your time and study. When I found out about this site, I download the collisio version. I research a lot that's why I added more questions and edited some of the mistakes. This version is my custom made, I used it to pass the exam. I got a 920/1000 on the test and I like to share this version to everyone. Keep practicing, you'll get it soon. Good Luck.

  • Jan 27, 2012
  • tolu
  • Nigeria
  • Jan 27, 2012

i did ccna today but i didn't pass. thanks to everyone.

  • Jan 27, 2012
  • kahan
  • Jordan
  • Jan 27, 2012

Jericho.576q is fabulous

I think Jericho.576q is better than collisio 486q.
it is

  • Jan 27, 2012

Add Comments

Only Registered Members Can Download VCE Files or View Training Courses

Please fill out your email address below in order to Download VCE files or view Training Courses. Registration is Free and Easy - you simply need to provide an email address.

  • Trusted By 1.2M IT Certification Candidates Every Month
  • VCE Files Simulate Real Exam Environment
  • Instant Download After Registration.
A confirmation link will be sent to this email address to verify your login.
Already Member? Click Here to Login

Log into your ExamCollection Account

Please Log In to download VCE file or view Training Course

Please provide a correct E-mail address

Please provide your Password (min. 6 characters)

Only registered Examcollection.com members can download vce files or view training courses.

Registration is free and easy - just provide your E-mail address. Click Here to Register

SPECIAL OFFER: GET 10% OFF

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |