Search results

  1. Question Intel Q4 Results

    wow... I knew things were bad at Intel but not this bad... Intel slashes dividend by over 65% https://www.cnbc.com/2023/02/22/intel-slashes-dividend-after-2022-earnings.html
  2. Question I have two spare Ryzen 3 2200G CPUs, wondering what to do with them

    They can make a good HTPC's, home servers, or light usage computer for grandma. They still have some value. Not a lot but that plus a good B450 board is a great start.
  3. Discussion RTX 4090 reviews

    Man that's a large jump from 1 gen to the next. Makes the current GPUs from both Nvidia and AMD look over priced. Sorry for those that bought an expensive card recently.
  4. Question Thinking of upgrading from R5 1600 to 12600k..

    If your itching look for a cheaper/used 3800x or 3900xt since your board support those. Then wait for the 7000series from AMD and refresh from intel.
  5. AMD is worth more than Intel now

    Yea but that is 2 years at intel 10nm (intel7+?) node. AMD will be at least 1 full node ahead by then if not more. Let alone ARMs V9 will built and in use by then. ARM has been making inroads on the V8 already. And like before that is if its not delayed even more. Intel does not exactly have a...
  6. AMD is worth more than Intel now

    This says more about the market being a bubble than the abilities of AMD or even intel. As said revenue is what to look at. I prefer AMD CPUs if everything was equal but they are not a good investment right now. Intel is a little over priced but not to bad when compared to the market as a...
  7. Question Upgrading processor on a Gateway M285-E

    The T7600 was a OE option. Make sure you have the newest BIOS and it should work. Just don't spend much on it. Cheaper to buy a new $200ish laptop if you're in the US. Like this... https://www.walmart.com/ip/seort/205077609 Not great, but better than a T7600 system.
  8. Discussion Booster Shot?

    Hard enough to get people to even get 1 shot. More local quasi-famous people ding from it so hopefully that will persuade them to do it. But second they offer it I will get it. My little one just meet the minimum age which made me happy. He has both shots now as well.
  9. Good aftermarket brands for ball joints, or pay the OEM premium?

    For that car the lower joints are easy to replace and does not alter the alignment. So even if you get a dud its not to bad. Best cheap joint: $12 at RA SUSPENSIA X50BJ0064 These are made in Turkey and not to bad. Esp if the car is getting older/worse for wear. Good Mid tier/price: $24 at RA...
  10. Rumor: Chevy is killing the Camaro and replacing it "something electric"

    So they are making the same mistake Ford did. :( I get ending the Camaro. But making a sedan and calling it a Camaro is just dumb. Hopefully they do not do it. For those that do not know Chevy only has 1 4 door gas car left, the Spark. All others are electric or 2 door cars now.
  11. Ford Maverick

    At less than 25k equipped, 20k starting point, I bet they sell a lot of them. The biggest issue I see is the bed is a little small. I rather have a little less room in the back seat for a full 5' bed. If they sell well maybe they will make a king-cab with a bench seat and longer bed.
  12. News IBM suing GlobalFoundries

    Yea IBMs next gen design was based on GFs 7nm. When GF dropped their 7nm it put IBM at least a full year behind on its next power chip. With that said this case will come down to what was in the contract exactly. Could go either way without knowing the exact language and what went on behind...
  13. Just sold a car..

    Many dealers make as much or more from the financing side than the selling price listed side. That and the extra BS fees they charge. Most places add anywhere from $1500-3000 in fees now. So that 21k car might run 22-24k and that's before financing. I was lucky and got my truck private party...
  14. Question Will the $175 I5 11400f give the $200 Ryzen 5 3600 a run for the money?

    Not only that but a B550/X570 board will have a better upgrade path as well.
  15. where is the best place to buy honda atf dw-1 ?

    Yea a lot will depend on the car/trans and how its driven. AWD vehicles seem to heat the transmission up more and wear their fluid also. Had a BMW AWD car at 45k the fluid was completely burnt and black. But the next BMW I did was a rwd around 50k and fluid looked just fine. Both had the same...
  16. where is the best place to buy honda atf dw-1 ?

    I do trans fluid changes first around 50-60k, then the 100k service. After that depends on what came out at the 100k. If it was burnt I told my customers to do 33k-ish changes, some as few as 20k due to their driving habits. If it looked good them check but as long as it still looks good then...
  17. where is the best place to buy honda atf dw-1 ?

    I'm a mechanic, or was-ish. So when I say I used a lot of Maxlife, and now castrol, I meant in hundreds of cars over the years. Had many customers with 200k+ on their original trans using the fluid I put in. Never an issue related to the fluid. Nothing wrong with the newer Honda fluid other...
  18. where is the best place to buy honda atf dw-1 ?

    "really dont want to use valvoline maxlife atf and want to use OEM dw-1. " Why? I have used many gallons of Maxlife in many Hondas with no issues. Even held up better in the V6 vehicles. Castrol Synthetic trans fluid has worked well also. I have a 2017 Honda V6 myself now and use aftermarket...
  19. Bad Ball Joints?! How is this possible?! Continuing my Trooper Saga . . .

    Yea same question, what was put on? Moog is not the same quality it once was. Many "moog" parts are just reboxed asian parts. I've use quite a few SUSPENSIA and Delphia of late. Both of those are made in Turkey. Not sure about longevity yet but seem pretty good do far. But still a crapshoot...
  20. i need something more comfortable than a compact car

    CUV size may be good to look into. Its higher than an small car and a little bigger but not so high like a SUV that people have to climb into it. Like the Hyundai Kona for example. I gave my mom a outlander sport. So she doe snot have to lean over to get into but not climb up either. Seems to...
  21. Catalytic Converter thefts are rising...

    Yep even the thin blue line wanted a cut... SC police officer made at least $20,000 illegally selling metal https://www.thestate.com/news/local/crime/article246497445.html "Milligan used his patrol car to go pick up the illegally obtained converters, according to SLED."
  22. U.S. Supreme Court backs Google over Oracle in major copyright case

    U.S. Supreme Court backs Google over Oracle in major copyright case https://www.reuters.com/article/us-usa-court-google-oracle/u-s-supreme-court-backs-google-over-oracle-in-major-copyright-case-idUSKBN2BS1A9?il=0 Not a Oracle fan. But this case seems to allow large Corps to steal code and get...
  23. Oil mysteriously disappeared.

    Idling is a lot less workload on a motor than driving it. Theres a reason motors warm up much faster driving than idling.
  24. Question Ram Configuration on New Threadripper Pro 8 Channel Platforms

    3600 at 3200 will allow better/lower latency and also means the memory was tested and rated at 3600mhz. So even if it was a little flaky at 3600, should be stable at 3200. Difference in price is very minor. Above 3600 seems the prices start to rise more quickly. I run my 3600 at 3400. But that...
  25. Question Ram Configuration on New Threadripper Pro 8 Channel Platforms

    I would get 8 sticks of 3600mhz ram but run it at 3200mhz. 3600 seems to be the sweet spot and 8x8 will give you 64gb. I say run it at 3200mhz as that will be more reliable as that is what the CPU is rated for. 3600mhz would be difficult to run reliably on the board and all 8 channels. 3200mhz...
  26. Question Ryzen 7 3700X - CPU throttled?

    There are settings that allow the CPU to run at higher TDP/power. I did it on my 2700x and saw a couple hundred more in frequency but the power usage was not worth it. In your case it may help since you are a 65w TDP. My CPU is already well above that at default, 105w. Look at your MBs manual...
  27. Question Ryzen 7 3700X - CPU throttled?

    Might be a BIOS setting. Look at your power draw. My guess is your board is not adhering to the 65watt TDP. Your chip is also 4.4Ghz single core rated, per AMDs site at the 65w TDP setting. https://www.amd.com/en/products/apu/amd-ryzen-7-4700g The OP can adjust his bios specs to allow his...
  28. Discussion Intel - the cost of BACKPORTING

    Looking at that chart it looks like AMD used its limited wafers mostly for server which is smart. That would explain the scarcity for desktop and mobile until recently. More money in server than any other.
  29. Discussion Intel - the cost of BACKPORTING

    Desktop AMD seems to be pulling ahead of Intel now in some measurements. https://www.techradar.com/news/amd-overtakes-intel-in-desktop-cpu-market-share-for-the-first-time-in-15-years Mind you desktop is one of the lowest profit margins for CPUs now. server and laptop are where the money is at...
  30. Discussion Intel - the cost of BACKPORTING

    I think a lot of that is legacy orders. Kinda like the old, but forgotten, saying of "No ever got fired for buying IBM...". That plus AMD can't make enough chips to keep up. If AMD can get prodtion up and even a few ARM chips, like apple, take more space it will affect intel badly. Intel is in...
  31. Do you change your own oil?

    Yea some filters come with the plug for BMWs. Another great german engineering design. :(
  32. Discussion Intel - the cost of BACKPORTING

    The biggest thing I can think of is it gives Intel time top work out any bugs from this design while they work on the next 10nm++ node. Once the refined 10nm is ready they have better design and fixes to move over. Its a streacth but this design is several years old and they put billions into...
  33. Do you change your own oil?

    Yea but you should shop around on the oil/filters more. 2 5 quart jugs for around $25 in store. https://www.costco.com/kirkland-signature-5w-30-full-synthetic-motor-oil-5-quart%2C-2-pack.product.100527865.html Walmart has supertech for around $15 a jug if you do not have a costco membership...
  34. Looks like BestBuy is not doing as well as some think...

    Best Buy just laid off 5,000 workers and will close more stores https://www.cnn.com/2021/02/25/business/best-buy-store-closures-workers/index.html In the Frys thread some talked how BB was able to stave off the online threat and survive. Looks like between online shopping and COVID-19 maybe...
  35. [2/4 @ $88 per share] GME - Gamestop stock - anyone following this absolute MEME-HILARITY (now with Elon tweet)

    By themselves no, but them making the news will drive it more. Showing over $150 right now.
  36. Fry's Electronics shutting their doors?

    Yep its on CNN now... New York (CNN Business)Fry's Electronics suddenly closed all of its stores overnight, ending a nearly four-decade run in business. The company, which had 31 stores across nine US states, said in a statement on its website that it "made the difficult decision to shut down...
  37. Question Low wattage CPUS

    Opps I missed that. Native built-in SAS is going to be harder to find, esp with low power in mind.
  38. Question Low wattage CPUS

    A 3000G and a B450 board would be cheap and low power. They overclock well but also undervolt as well which woudl work for you. Built in GPU is also low power and works well for everything but gaming. Looks like there is a good size batch coming back soon...
  39. Question How well would Zen 3 work on GloFo 12nm?

    I think thats more due to the I/O chip for the newer Zens. Can't sell new Zens without it so the older 3000g chips and such fall to the waste side. Also with a lot of other chip shortages GF is probably trying to get as many of those customer as long term as they know AMD will not last past...
  40. Question Epyc 7742 ES or 7B12?

    I don't have either but the biggest difference I can see is the TDP, 225 vs 280. That drives the base frequency of 2.60Ghz for the 7H12 and 2.25Ghz for the 7742. So if this will be in a small case and cooling may be an issue get the 7742. If you have room for better cooling then the 7H12 would...
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |