Question Anti-Sag bracket

[pcslookout]

Do I still need to use it for a heavy video card if mounted vertically?

 

[Pohemi]

It depends on the mounting, I guess. If it's an addon bracket that came with the case, I'd say it would depend on the length and weight of the card, and how much length and support the mounting bracket offers. An additional bracket would be a good idea if the vertical mounting bracket is short, thin, etc.

I assume you're referring to a standard tower with a vertical GPU mount option, and not a case where the mobo lays flat (like a cube case).

 

[pcslookout]

It depends on the mounting, I guess. If it's an addon bracket that came with the case, I'd say it would depend on the length and weight of the card, and how much length and support the mounting bracket offers. An additional bracket would be a good idea if the vertical mounting bracket is short, thin, etc.

I assume you're referring to a standard tower with a vertical GPU mount option, and not a case where the mobo lays flat (like a cube case).

So how would I use a anti-sag bracket vertically though ? Yes i read the manual but does not say.

Video card is around 4 lb give or take.

 

[Pohemi]

I suppose I should have asked what kind of anti-sag bracket you had in mind. I forgot that there's a few different types. I had used a simple adjustable bolt type that the end of the card rested on. There are also extended and reinforced brackets too that mount where the GPU screws down in the case slots. Never used one of those myself.

 

[pcslookout]

I suppose I should have asked what kind of anti-sag bracket you had in mind. I forgot that there's a few different types. I had used a simple adjustable bolt type that the end of the card rested on. There are also extended and reinforced brackets too that mount where the GPU screws down in the case slots. Never used one of those myself.

This. https://www.gigabyte.com/us/Support/Consumer/FAQ/4301

 

[Pohemi]

Interesting, I've never seen one that mounted on the mobo.

Will it align with where the card will be, and will it actually make contact? If the answers are yes, I would use it just to be safe but that's me. If the answers are no, then there's obviously no reason to install it.

 

[Mahboi]

"Anti Sag Bracket"
Can we just start calling it a GPU bra?

I mean it is exactly what a bra does.

 

[biostud]

I used a couple of zip ties to prevent it from sacking.

What I don't understand is that, when you produce a 3 slot video card with a backplate it would be pretty easy to design it so it didn't sag.

 

[BFG10K]

"Anti Sag Bracket"
Can we just start calling it a GPU bra?

I mean it is exactly what a bra does.

A bra also makes them look bigger. Not sure we want that in a 4090...

 

[mikeymikec]

A bra also makes them look bigger. Not sure we want than in a 4090...

In the era of "pimp my pc" I think a lot of people would want precisely that!

 

[Mahboi]

A bra also makes them look bigger. Not sure we want than in a 4090...

4090 says: if you can't have me at my biggest, you can't have me at my fastest!!

 

[Mahboi]

In the era of "pimp my pc" I think a lot of people would want precisely that!

Time to start making Tiktoks about GPU bras, with softcore porno music and glitters/light effects like in KPOP videos.
MSI should go first, they're always first in bad ideas, like MTL based gaming handhelds.

 

[In2Photos]

Does your GPU look like it's sagging? I'd be surprised if you need one when vertically mounting a GPU. The same forces do not apply when mounted in this way. The GPU can not pivot around the PCIe slot like is does when mounted horizontally.

 

[Ajay]

Does your GPU look like it's sagging? I'd be surprised if you need one when vertically mounting a GPU. The same forces do not apply when mounted in this way. The GPU can not pivot around the PCIe slot like is does when mounted horizontally.

^ this, unless OP has some very unusual setup.

 

[Mopetar]

"Anti Sag Bracket"
Can we just start calling it a GPU bra?

I mean it is exactly what a bra does.

Since they've told us to pronounce it as "tie", NVidia should change the name of their flagship card so that it's now the 5090 TiTi.

Gonna need a big bracket to hold them big 'ole TiTis.

 

[jamesdsimone]

I use a wooden dowel and some plastic foam. I use enough foam so there is a little tension. Works fine.