pfsense lan and wan must be in different ip range.
all devices --- lan|wifi router|wan -- lan|pfsense|wan-- internet
or all devices --- lan1|wifi router in ap mode, gateway ip set as pfsense lan ip|lan2 -- lan|pfsense|wan-- internet
Unfortunately, I won't be available in coming days for quite...
Old PC can be used as pfSense router, but you need to add an USB ethernet adapter or PCIe NIC, however it will use too much electricity. Running pfsense in a VM also require a PC that's always on 24/7 and probably need complex config mentioned by @Fallen Kell
You can run pfsense on Zimaboard...
Don't know, but they should. Just make sure you can return them if it doesn't work.
By the way, I wonder whether IPv6/IPv4 issue has something to do with DNS. I will use any public DNS to replace ISP DNS in router configuration.
Some common public DNS list ...
Public wifi hotspot signal no matter it's AT&T, T-Mobile or Xfinity, etc is always weak. You have to be nearby or have line of sight. Soap box size wifi extender with internal antennas won't cut it.
You will need at least WISP ( Wireless Internet Service Provider) router which has wireless...
The AP mode seems already working for RE330 extender, exactly what do you want to achieve? And are you Xfinity customer at home and using their wifi router/gateway or you have different ISP?
Why do you still try to connect to public Xfinity wifi hotspot outside of your house using RE330 range...
I don't get it.
Are you talking about Xfinity Wifi hotspot that's supposed to be accessed outside of your home but you want to connect it using TP-Link RE330 at home wirelessly then share with other wifi devices?
On the other hand, AP mode only uplink to your (wifi) router with wired ethernet...
Looks like the hotspot OP talked about was smartphone hotspot or mobile hotspot devices from AT&T, Verizon or T-Mobile.
OP should reveal what kind of hotspot (service) device & model so someone here probably can help.
==
AP mode means it's wired between extender and uplink device (could be...
QNAP probably is still your best bet even if you don't like to deal with transceivers.
https://www.amazon.com/QNAP-QSW-308-1C-Switch-Gigabit-Unmanaged/dp/B07VC9T3WQ
plus two $40 transceivers, can be under $260
==
A bit over budget, but you get 4 ports 10Gbe and management capability
QNAP...
Check Event Viewer. Also check how much free space you still have on 500GB SSD.
And is KC3000 2tb ssd used as internal drive or as external USB drive?
What's KC3000 temperature revealed by HWINFO64? Maybe it's too hot?
Also
https://www.wepc.com/tips/fix-steams-not-enough-disk-space-error/
Although I did say you can't trust any vendors, I'll still go with at least Crucial MX500 or Samsung EVO 870 with 5 years warranty. Both brands use their own chips.
There is a reason for Cheap SSD with only 3 year warranty. They usually have worse chips and as mentioned by others, they usually...
The reality is that you can't trust any vendors, even ones with "good" reputation.
And RAID is not backup, it's only for up time, it's been told many times and you can find tons of articles explaining why it's not backup.
You still need backup your raid 10 using other methods/media
Your best bet is to set up a PC or VM and let users login remotely into the machine if you don't want to pay any money,
but different users also can not login at the same time.
As @aigomorla has suggested, quickbooks file probably only works on local machine or in a LAN environment.
https://betterbottomline.com/dont-try-to-run-quickbooks-pro-premier-or-enterprise-via-dropbox-google-drive-onedrive-or-similar-services/
Depend on how the vendor designed its routers, not every vendor's router model will include static ip clients in it's active clients, don't think you need to worry about that.
Some will only show dhcp clients. By the way, contact the software vendor to send you the link to older version of...
What if you use direct port to port between PC/laptop and the DVR and bypass the router to rule out it's router's issue? You have to enter static IP though
"configurating shots" means what have you done or enter in the software to make it work.
Have you tried older version of the software? Latest version might have bugs.
And you still don't have a second machine to try? The software doesn't even run this time?
Can you view the streaming video...
Why not showing some configuration screen shots? No one here has your device and software. Does the software have error logging capability that you can check?
And are you viewing the video from a remote location?
Did the Windows Event Viewer reveal anything?
I'll just do Windows software mirror and you still have 2TB remaining space left on 4TB drive where you can create another partition to store other stuff,
no syncing required. You can verify that if the mirror is working after the mirroring is done by unplugging the drives individually, check...
Linux based NAS can read/write NTFS volume, but not the first disk that the NAS OS resides on. For a Linux based NAS, it will always format the first disk in EXT2/3/4 format unless you purchase Synology/QNAP or DIY FreeNAS etc where you can choose other format (but also not NTFS)
You have to...
Replace CMOS battery first.
https://www.electronicshub.org/symptom-of-a-cmos-battery-failure/
If that doesn't work, probably PSU.
Also check Event Viewer - Administrative Events see if you can get some clues.
It's possible to read ext2/3/4 disk from Linux
https://www.diskinternals.com/linux-reader/
for writing you will require Linux File Systems for Windows by Paragon Software
https://www.paragon-software.com/home/linuxfs-windows/
No. Internal disk format is always EXT4 or some other format from Linux. NTFS disks can only be external (USB) or be 2nd disk. No matter which NAS vendor.
Why not go to WD's support forum and ask. According to WD EX4100's user pdf manual, in its JBOD mode definition , disks are treated as separated volumes.
P.57...
You still need the motherboard to support bifurcation as long as you want more than one drive per single x16 adapter even if you use U.2 or U.3 form factor since all of them only support PCIE (1.0 to 4.0/5.0) x4 interface
another post regarding BIOS mod...
@Shmee See if following post helps. Googled info. Didn't read through the whole post.
Don't know if you need to do BIOS mod to add bifurcation functionality to the motherboard to make all 4 nvme drives to be seen if you want to have more than one nvme drive on a single adapter...
It seems a common issue since Win10. It comes and goes and it's annoying, happens on my old DELL machine too. Reboot several times might eventually fix it.
You connected 2 routers together somehow. As @mv2devnull suggested. The DHCP broadcast all over the whole network. The client will always just get IP address randomly from one of the two DHCP. servers.
Set different SSID for each router then.
Or buy a dual WAN (fail over) router and run both wifi routers in AP mode.
Like one from TP-Link
https://www.amazon.com/TP-Link-Integrated-Lightening-Protection-TL-R605/dp/B08QTXNWZ1
According to T-Mobile website, It has a 15-day test drive.
typical download speeds between 72 – 245 Mbps,
T-Mobile Home Internet is just $50 all in with AutoPay, or $55 without AutoPay.
There's no annual service contract and no monthly fees...
Mac OS comes from BSD, which is Linux like. Completely different from Windows. Linux has a live mode that you can run from a CDROM/USB. Windows can also run in a live mode that's called Windows PE. But it's complete different from a Windows installation...
You have been told multiple times that you can't just clone an existing Windows disk to a external usb HDD/SSD and expect it to boot from USB.
Seeing a device appears in a boot menu entry doesn't mean it's really bootable.
You have to use free Rufus tool to create a new installation on a USB...
Want upgradability but choose ITX? You are conflicting yourself. and as @igor_kavinski suggested, choose AM5, DDR5 and Micro ATX if you want to stay in AMD camp.
And if you like the mesh look, https://www.amazon.com/Compact-Desktop-Chassis-Tool-Free-GPU200-255m/dp/B0C6JQ63HN
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.